Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Volvo Engine Oil VDS-4.5 10W-30
- Product Code
- 001D4839
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Engine oil.
Manufacturers & Suppliers
Shell Oil Products US
manufacturer
PO Box 4427 Houston TX 77210-4427 USA
( +1) 877-276-7285
Emergency Contacts
Emergency Contact
877-504-9351
Emergency Contact
877-242-7400
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Highly refined mineral oils and additives. The highly refined mineral oil contains <3% (w/w) DMSO-extract, according to IP346. Classification based on DMSO extract content < 3% (Regulation (EC) 1272/2008, Annex VI, Part 3, Note L).
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Interchangeable low viscosity base oil (<20,5 cSt @40°C) * | --- | 90% | Yes |
| Alkaryl amine | 36878-20-3 | 1 - 5% | Yes |
| Zinc dialkyl dithio-phosphate | 84605-29-8 | 1 - 2.49% | Yes |
| Calcium sulphonate | 70024-69-0 | 0.1 - 0.99% | Yes |
| Calcium alkaryl sulphonate | 75975-85-8 | 0.1 - 0.99% | Yes |
Notes
contains one or more of the following CAS-numbers: 64742-53-6, 64742-54-7, 64742-55-8, 64742-56-9, 64742-65-0, 68037-01-4, 72623-86-0, 72623-87-1, 8042-47-5, 848301-69-9, 68649-12-7, 151006-60-9, 163149-28-8.
First Aid Measures
Emergency procedures for chemical exposure incidents
No treatment necessary under normal conditions of use. If symptoms persist, obtain medical advice.
Remove contaminated clothing. Flush exposed area with water and follow by washing with soap if available. If persistent irritation occurs, obtain medical attention.
Flush eye with copious quantities of water. Remove contact lenses, if present and easy to do. Continue rinsing. If persistent irritation occurs, obtain medical attention.
In general no treatment is necessary unless large quantities are swallowed, however, get medical advice.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, water spray or fog. Dry chemical powder, carbon dioxide, sand or earth may be used for small fires only.
Do not use water in a jet.
Hazardous combustion products may include: A complex mixture of airborne solid and liquid particulates and gases (smoke). Carbon monoxide may be evolved if incomplete combustion occurs. Unidentified organic and inorganic compounds.
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
Firefighter Protection
Proper protective equipment including chemical resistant gloves are to be worn; chemical resistant suit is indicated if large contact with spilled product is expected. Self-Contained Breathing Apparatus must be worn when approaching a fire in a confined space. Select fire fighter's clothing approved to relevant Standards (e.g. Europe: EN469).
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid contact with skin and eyes.
Use appropriate containment to avoid environmental contamination.
Slippery when spilt. Avoid accidents, clean up immediately. Reclaim liquid directly or in an absorbent. Soak up residue with an absorbent such as clay, sand or other suitable material and dispose of properly.
Materials: clay, sand or other suitable material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid prolonged or repeated contact with skin. Avoid inhaling vapour and/or mists. When handling product in drums, safety footwear should be worn and proper handling equipment should be used. Properly dispose of any contaminated rags or cleaning materials in order to prevent fires.
Keep container tightly closed and in a cool, well-ventilated place. Use properly labeled and closable containers. Store at ambient temperature.
Properly dispose of any contaminated rags or cleaning materials in order to prevent fires.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable.
The product does not pose any further reactivity hazards in addition to those listed in the following sub-paragraph.
Reacts with strong oxidising agents.
Extremes of temperature and direct sunlight.
Strong oxidising agents.
No decomposition if stored and applied as directed.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
Ecotoxicity
Persistence and degradability
Not readily biodegradable. Major constituents are inherently biodegradable, but contains components that may persist in the environment. Persistent per IMO criteria.
Bioaccumulative potential
Contains components with the potential to bioaccumulate.
Mobility in soil
The product is a liquid, adsorbs to soil particles (low mobility), and floats on water.
12.1 Toxicity
12.7 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Recover or recycle if possible.
It is the responsibility of the waste generator to determine the toxicity and physical properties of the material generated to determine the proper waste classification and disposal methods in compliance with applicable regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The regulatory information is not intended to be comprehensive. Other regulations may apply to this material.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Volvo Engine Oil VDS-4.5 10W-30?
The signal word is no signal word.
What is the physical form of Volvo Engine Oil VDS-4.5 10W-30?
Volvo Engine Oil VDS-4.5 10W-30 is a liquid at room temperature. appearing as liquid at room temperature. with amber color.
What is Volvo Engine Oil VDS-4.5 10W-30 used for?
Engine oil.
What are the hazard statements for Volvo Engine Oil VDS-4.5 10W-30?
This substance has 3 hazard statements:
- PHYSICAL HAZARDS: Not classified as a physical hazard under GHS criteria.
- HEALTH HAZARDS: Not classified as a health hazard under GHS criteria.
- ENVIRONMENTAL HAZARDS: Not classified as an environmental hazard under GHS criteria.