Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- HiBiScrub®
- Product Form
- Mixture
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Antimicrobial preparation for pre- and post operative hand disinfection and general antisepsis.
Uses advised against
No additional information available
Manufacturers & Suppliers
Mölnlycke Health Care
manufacturer
Medlock Street, Oldham, OL1 3HS - United Kingdom
+44 (0) 161 621 3900
Emergency Contacts
Emergency Contact
+44 (0) 161 621 2121
9am-5pm
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Lauryldimethylamine oxide EC: 268-938-5 | 1643-20-5 | 1 - 5% | Yes |
| Propan-2-ol EC: 200-661-7 | 67-63-0 | 1 - 5% | Yes |
| Glycerol EC: 200-289-5 | 56-81-5 | 1 - 5% | No |
| Chlorhexidine digluconate EC: 242-354-0 | 18472-51-0 | 1 - 5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air, keep the patient warm and at rest. If symptoms develop obtain medical attention.
Wash with plenty of soap and water. If symptoms develop obtain medical attention.
Symptoms: Causes skin irritation.
Remove contact lenses, if present and easy to do. Continue rinsing. Rinse immediately with plenty of water for 15 minutes. If symptoms develop obtain medical attention.
Symptoms: Causes serious eye damage.
Rinse mouth. Give 100 - 200 ml of water to drink. Do NOT induce vomiting. Do not give an unconscious person anything to drink. If symptoms develop obtain medical attention.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing media appropriate for surrounding fire.
None.
Use water spray or fog for cooling exposed containers. Exercise caution when fighting any chemical fire. Avoid fire-fighting water entering the environment.
Firefighter Protection
Do not enter fire area without proper protective equipment, including respiratory protection.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate unnecessary personnel.
Dike to collect large liquid spills.
Prevent entry to sewers and public waters.
Absorb with earth, sand or other non-combustible material and transfer to containers for later disposal. Wash spill area with soapy water.
Materials: earth, sand or other non-combustible material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Provide good ventilation in process area to prevent formation of vapour. Avoid contact with eyes. Avoid inhalation of vapours.
Keep only in the original container in a cool, well ventilated place away from : Strong oxidizing agent. Keep container closed when not in use. Protect material from direct sunlight.
Handle in accordance with good industrial hygiene and safety practice. Do not eat, drink or smoke when using this product.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide adequate ventilation, including appropriate local extraction, to ensure that occupational exposure limits are not exceeded.
Standard EN 374 - Protective gloves against chemicals.
Chemical goggles or safety glasses. Standard EN 166 - Personal eye-protection.
In case of inadequate ventilation wear respiratory protection.
Use chemically protective clothing.
Avoid release to the environment.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
None known.
None known.
Extremely high or low temperatures.
Oxidizing agents.
Carbon monoxide. Carbon dioxide. Nitrogen oxides. Ammonia. Hydrogen fluoride. Hydrogen chloride.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose in a safe manner in accordance with local/national regulations.
Dispose in a safe manner in accordance with local/national regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S.
- Transport Class
- 9
- Packing Group
- III
No special precautions required.
No special precautions required.
No special precautions required.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for HiBiScrub®?
The signal word is danger.
What is the physical form of HiBiScrub®?
HiBiScrub® is a liquid appearing as viscous. with yellow. red. color. It has citrus fruits. odor.
What is the solubility of HiBiScrub®?
No data available
What is HiBiScrub® used for?
Antimicrobial preparation for pre- and post operative hand disinfection and general antisepsis.
What are the hazard statements for HiBiScrub®?
This substance has 2 hazard statements:
- H318: Causes serious eye damage
- H410: Very toxic to aquatic life with long lasting effects
What is the melting point of HiBiScrub®?
The melting point is No data available and the boiling point is No data available.