Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BioClean HP
- Product Form
- Mixture
- Product Code
- KWST-08
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
De-icer, Detergent, Anti-freezing agent
Uses advised against
No data available
Manufacturers & Suppliers
Kraul & Wilkening und Stelling GmbH
manufacturer
Lohweg 39, 30559 Hannover
+49-511-510 050
Emergency Contacts
National Poisons Information Centre Beaumont Hospital
+353 18 37 99 64/+353 1 809 21 66
National Poisons Information Service (Newcastle Centre) Regional Drugs and Therapeutics Centre, Wolfson Unit
0844 892 0111
Monday to Friday, 08.00 to 18.00 hours, healthcare professionals only
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Ethanol EC: 200-578-6 | 64-17-5 | 65 - 85% | Yes |
| ethanediol, ethylene glycol EC: 203-473-3 | 107-21-1 | 15% | Yes |
| propan-2-ol, isopropyl alcohol, isopropanol EC: 200-661-7 | 67-63-0 | 5% | Yes |
| Butanone EC: 201-159-0 | 78-93-3 | 1% | Yes |
Full text of H-statements: see section 16
First Aid Measures
Emergency procedures for chemical exposure incidents
Keep at rest. Provide fresh air. When in doubt or if symptoms are observed, get medical advice.
Symptoms: Inhalation of high vapour concentrations may cause symptoms like headache, dizziness, tiredness, nausea and vomiting.
After contact with skin, wash immediately with plenty of water and soap. When in doubt or if symptoms are observed, get medical advice.
Symptoms: May be irritating.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. When in doubt or if symptoms are observed, get medical advice.
Symptoms: Causes serious eye irritation.
Rinse mouth. Do NOT induce vomiting. Rinse mouth immediately and drink plenty of water. Get medical advice/attention.
Symptoms: May be irritating.
Immediate Medical Attention
When in doubt or if symptoms are observed, get medical advice.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray, Alcohol resistant foam, Carbon dioxide, Dry extinguishing powder.
Strong water jet.
Highly flammable liquid and vapour. Vapours can form explosive mixtures with air. Vapours are heavier than air and may spread along floors. Vapours can travel considerable distances to a source of ignition where they can ignite, flash back, or explode.
Use water spray jet to protect personnel and to cool endangered containers. In case of fire: Wear self-contained breathing apparatus. Evacuate personnel to a safe area.
Firefighter Protection
Special protective equipment for firefighters. In case of fire: Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ensure procedures and training for emergency decontamination and disposal are in place.
Do not allow to enter into surface water or drains.
Absorb with liquid-binding material.
Materials: liquid-binding material (e.g. sand, diatomaceous earth, acid- or universal binding agents)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Provide adequate ventilation. Use personal protective equipment as required. Avoid contact with skin, eyes and clothing. Do not breathe vapour/aerosol. After use replace the closing cap immediately. Ensure proper process control to avoid excess waste discharge (temperature, concentration, pH, time). Take any precaution to avoid mixing with incompatible materials. Take precautionary measures against static discharges.
Keep container tightly closed in a cool, well-ventilated place. Storage of flammable liquids. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
Keep good industrial hygiene. Eye wash bottle with pure water. Use only at a place, which is equipped with a safety shower. Wash hands and face before breaks and immediately after handling of the product.
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Take precautionary measures against static discharges.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide adequate ventilation. Use only in area provided with appropriate exhaust ventilation. Appropriate engineering controls : Closed system . Take precautionary measures against static discharges. Organisational measures to prevent /limit releases, dispersion and exposure . See also section 7 .
Wear chemically resistant gloves (tested to EN374). NBR (Nitrile rubber). The selection of specific gloves for a specific application and time of use in a working area, should also take into account other factors on the working space, such as (but not limited to): other chemicals that are possibly used, physical requirements (protection against cutting/drilling, skill, thermal protection), and the instructions/specification of the supplier of gloves.
Safety glasses with side-shields, Goggles. (EN 166)
In case of insufficient ventilation, wear suitable respiratory equipment. Full face mask (EN 136). Half-face mask (DIN EN 140). Filter type: A - EN 141
Overalls, apron and boots recommended.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable under storage at normal ambient temperatures.
Flammable liquid. Reference to other sections: 10.5.
None under normal processing.
Keep away from sources of heat (e.g. hot surfaces), sparks and open flames. See also section 7. Handling and storage.
No data available.
Burning produces noxious and toxic fumes. Carbon oxides.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Handle with care. Safe handling: see section 7 : Handling and storage . Dispose of contaminated materials in accordance with current regulations. Refer to manufacturer/supplier for information on recovery/recycling. Collect and dispose of waste product at an authorised disposal facility.
Collect and dispose of waste product at an authorised disposal facility.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1987
- Shipping Name
- ALCOHOLS, N.O.S.
- Transport Class
- 3
- Packing Group
- II
S2, S20
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BioClean HP?
The signal word is danger.
What is the physical form of BioClean HP?
BioClean HP is a liquid appearing as liquid. with blue or undyed. color. It has alcoholic with addition of citrus-like perfume. odor.
What is the solubility of BioClean HP?
Water: Completely soluble
What is BioClean HP used for?
De-icer, Detergent, Anti-freezing agent
What are the hazard statements for BioClean HP?
This substance has 2 hazard statements:
- H225: Highly flammable liquid and vapour.
- H319: Causes serious eye irritation.
What is the melting point of BioClean HP?
The melting point is No data available and the boiling point is No data available.