NextSDS Logo
Safety Data Sheet EN

STARKE PURE CLEAN

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
STARKE PURE CLEAN
Chemical Name
Aqueous Solution

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Exterior Cleanser

Manufacturers & Suppliers

S

Starke Yacht Surface Technologies

distributor

17000 Alico Commerce Ct., Suite 101, Fort Myers, FL 33912

+1 (800) 203-5315

Emergency Contacts

John Watkins

+1 (239) 851-6030

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Eye Irrit. Cat. 2A H319

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H319 Causes serious eye irritation.

Precautionary Statements

P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P333 + P313 If skin irritation or rash occurs: Get medical advice/attention.
P337+P313 If eye irritation persists: Get medical advice/attention.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Chemical Name CAS Number Concentration Hazardous
PROPRIETARY ANIONIC/NONIONIC AMPHORTERIC BLEND --- 25 - 35% No
SODIUM CHLORIDE EC: 231-598-3 7647-14-5 1% Yes
METHYCHLOROISOTHIAZOLINONE (ISOTHIAZOLINONES) EC: 247-500-7 26172-55-4 1% Yes
FRAGRANCE / PARFUM --- 0.1% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove victim to fresh air at once.

Symptoms: None expected.

Skin contact

If irritation occurs and product is on the skin, rinse thoroughly with lukewarm water, followed by a thorough washing of the affected area with soap and water.

Symptoms: May be irritating to skin. The product can cause allergic skin reactions (e.g., rashes, welts, dermatitis) in some sensitive individuals. Symptoms of skin overexposure may include redness, itching, and irritation of affected areas.

Eye contact

flush with copious amounts of lukewarm water for at least 15 minutes.

Symptoms: Moderately irritating to the eyes. Symptoms of overexposure may include redness, itching, irritation and watering.

Ingestion

If ingested, do not induce vomiting. If product has been swallowed, drink plenty of water or milk IMMEDIATELY. If the patient is vomiting, continue to offer water or milk. Never give water or milk to an unconscious person.

Symptoms: Nausea, intestinal discomfort, vomiting and/or diarrhea.

Immediate Medical Attention

Contact the nearest Poison Control Center or local emergency number. Provide an estimate of the time at which the material was ingested and the amount of the substance that was swallowed. If irritation occurs, contact a physician. If irritation, redness or swelling persists, contact a physician immediately.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Provide appropriate local exhaust ventilation on open containers. When using keep the product moist at all times. Use in an enclosed process area is recommended. Use in a well-ventilated area. Do not use in a confined area or areas with little or no air movement.

Hands

AVOID SKIN CONTACT. Select and use gloves and/or protective clothing to prevent skin contact based on the results of an exposure assessment. Consult with your glove and/or protective clothing manufacturer for selection of appropriate compatible materials. Gloves made from the following material(s) are recommended: Nitrile Rubber. If necessary, refer to U.S. OSHA 29 CFR 1910.138, the appropriate standards of Canada, of the E.C. member states.

Eyes

AVOID EYE CONTACT. Wear safety glasses. If necessary, refer to U.S. OSHA 29 CFR 1910.133, Canadian standards, or the European Standard EN166.

Respiratory

Avoid breathing of vapors, mists, or spray. No special respiratory protection is required under typical circumstances of use or handling. If necessary, use only respiratory protection authorized per U.S. OSHA's requirement in 29 CFR 1910.134, or applicable U.S. state regulations, or the appropriate standards of Canada, its provinces, E.C. member states, or Australia.

Skin/Body

No special body protection is required under typical circumstances of use and handling. If necessary, refer to appropriate standards of Canada, the E.C. member states, or U.S. OSHA.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Molecular Weight
---
Odor
Coconut odor
Properties Status
---
Solidification Point
---
Solubility In Fat
---
Bulk Density
---
Colour
Blue
Softening Point
---
Vapor Pressure
---
Flammability
---
Relative Evaporation Rate
---
Appearance
Blue viscous liquid
State Under Standard Conditions
---
Cloud Point
---
Vapor Density
---
Ph
7-9
Solubility
Soluble
Colour Intensity
---
Melting Point
---
Boiling Point
100C (212 F)
Auto Ignition Temperature
---
Density
---
Solubility In Water
---
Explosive Limits
---
Relative Density
0.865
Voc Content
---
Lower Explosive Limit
---
Flash Point
107C (225F)
Partition Coefficient
---
Metal Corrosion
---
Odor Threshold
---
Form
viscous liquid
Dynamic Viscosity
---
Evaporation Rate
---
Freezing Point
---
Upper Explosive Limit
---
Decomposition Temperature
---
Physical State
viscous liquid
Physical State Data
liquid
Kinematic Viscosity
165 mm [2] /s
Crystallisation Point
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for STARKE PURE CLEAN?

The signal word is warning.

What is the physical form of STARKE PURE CLEAN?

STARKE PURE CLEAN is a viscous liquid appearing as blue viscous liquid with blue color. It has coconut odor odor.

What is the solubility of STARKE PURE CLEAN?

Soluble

What is STARKE PURE CLEAN used for?

Exterior Cleanser

What are the hazard statements for STARKE PURE CLEAN?

This substance has 1 hazard statement:

  • H319: Causes serious eye irritation.