STARKE SIMPLE CLEAN

Remove victim to fresh air at once.

Symptoms: Irritation to the nose, throat and other tissues of the respiratory system.

Rinse thoroughly with lukewarm water, followed by a thorough washing of the affected area with soap and water.

Symptoms: Irritation, redness or swelling

Flush with copious amounts of lukewarm water for at least 15 minutes.

Symptoms: Irritation

If ingested, do not induce vomiting. If product has been swallowed, drink plenty of water or milk IMMEDIATELY. If the patient is vomiting, continue to offer water or milk. Never give water or milk to an unconscious person. Contact the nearest Poison Control Center or local emergency number. Provide an estimate of the time at which the material was ingested and the amount of the substance that was swallowed.

Symptoms: Abdominal pain, stomach upset, nausea, vomiting and diarrhea.

Use media as appropriate for surrounding fire.

Non-flammable.

Fire should be fought from a safe distance.

Before cleaning any spill or leak, individuals involved in spill cleanup must wear appropriate Personal Protective Equipment. CAUTION – may be slippery if spilled.

For small spills (e.g., < 1 gallon (3.8 L)) wear appropriate personal protective equipment (e.g., goggles, gloves). Maximize ventilation (open doors and windows) and secure all sources of ignition. Remove spilled material with absorbent material and place into appropriate closed container(s) for disposal. Dispose of properly in accordance with local, state and federal regulations. Wash all affected areas and outside of container with plenty of warm water and soap. Remove any contaminated clothing and wash thoroughly before reuse.

For large spills (e.g., ≥ 1 gallon (3.8 L)), deny entry to all unprotected individuals. Dike and contain spill with inert material (e.g., sand or earth). Use ONLY non-sparking tools for recovery and cleanup. Transfer liquid to containers for recovery or disposal and solid diking material to separate containers for proper disposal. Remove contaminated clothing promptly and wash affected skin areas with soap and water.

Keep spills and cleaning runoffs out of municipal sewers and open bodies of water.

Remove spilled material with absorbent material; Use ONLY non-sparking tools for recovery and cleanup; Transfer liquid to containers for recovery or disposal and solid diking material to separate containers for proper disposal.

Materials: absorbent material, inert material (e.g., sand or earth)

Do not eat, drink, or smoke when using this product. Wash exposed areas thoroughly with soap and water. Avoid breathing of vapors, mists, or spray. Avoid prolonged or repeated skin contact. Avoid breathing of dust created by sanding, grinding, or machining.

Keep containers sealed at all times, store in well-ventilated area.

Wash hands after handling, and before eating. Wash exposed areas thoroughly with soap and water. Do not eat, drink, or smoke when using this product.

Provide appropriate local exhaust ventilation on open containers. When using keep the product moist at all times. Use in an enclosed process area is recommended. Use in a well-ventilated area. Do not use in a confined area or areas with little or no air movement.

AVOID SKIN CONTACT. Select and use gloves and/or protective clothing to prevent skin contact based on the results of an exposure assessment. Consult with your glove and/or protective clothing manufacturer for selection of appropriate compatible materials. Gloves made from the following material(s) are recommended: Nitrile Rubber. If necessary, refer to U.S. OSHA 29 CFR §1910.138, the appropriate standards of Canada, of the E.C. member states.

AVOID EYE CONTACT. Wear safety glasses. If necessary, refer to U.S. OSHA 29 CFR §1910.133, Canadian standards, or the European Standard EN166.

Avoid breathing of vapors, mists or spray. No special respiratory protection is required under typical circumstances of use or handling. If necessary, use only respiratory protection authorized per U.S. OSHA's requirement in 29 CFR §1910.134, or applicable U.S. state regulations, or the appropriate standards of Canada, its provinces, E.C. member states, or Australia.

No special body protection is required under typical circumstances of use and handling. If necessary, refer to appropriate standards of Canada, the E.C. member states, or U.S. OSHA.

Stable under ambient conditions when stored properly (see section 7, Storage and Handling)

Hazardous polymerization will not occur.

High temperatures and incompatible substances.

Strong oxidizing agents.

If exposed to extremely high temperatures, the products of thermal decomposition may include irritation vapors and nitrogen and carbon oxide gases (e.g., NO_{x}, CO, CO_{2}).

dispose of waste product in a facility permitted to accept chemical waste.

Reclaim product if feasible.