Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Uses Information
Overview
STARKE LIQUID THOR is a clear liquid substance commonly used stain and spill treatment.
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS02
GHS05
GHS07
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H225: Highly flammable liquid and vapor.
- H314: Causes severe skin burns and eye damage.
- H302: Harmful if swallowed.
- H412: May cause long lasting harmful effects to aquatic life
Precautionary Statements
- P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- P233: Keep container tightly closed.
- P240: Ground and bond container and receiving equipment.
- P241: Use explosion-proof (electrical/ventilating/lighting) equipment.
- P242: Use non-sparking tools.
- P243: Take action to prevent static discharges.
- P260: Do not breathe dust or mist.
- P264: Wash thoroughly after handling.
- P270: Do not eat, drink or smoke when using this product.
- P273: Avoid release to the environment.
- P280: Wear protective gloves/protective clothing/ eye protection/face protection.
- P301+P330+P331: IF SWALLOWED: Rinse mouth. Do not induce vomiting.
- P363: Wash contaminated clothing before reuse.
- P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.
- Get emergency medical help immediately.
- P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- If eye irritation persists: Get medical help.
- P321: Specific treatment see section 4 (first aid) of this SDS or container label.
- P403+P235: Store in a well-ventilated place. Keep cool.
- P405: Store locked up.
- P501: Dispose of contents/container to a licensed treatment, storage or disposal facility (TSDF).
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
Starke Yacht Surface Technologies
distributor
17000 Alico Commerce Ct., Suite 101, Fort Myers, FL 33912
US
+1 (800) 203-5315
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
Emergency Contact
+1 (239) 851-6030
US
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Chemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| DIMETHYL METHYLPHENYL METHOXYSILOXANE | 68952-93-2 | 30-45% | ⚠️ Hazardous |
| METHYLTRIMETHOXYSILANE EC: 214-685-0 | 1185-55-3 | 10-25% | ⚠️ Hazardous |
| POLYSILAZANE | 475645-84-2 | 5-15% | ⚠️ Hazardous |
| DI-N-BUTYL ETHER EC: 205-575-3 | 142-96-1 | 5-10% | ⚠️ Hazardous |
| ZINC OXIDE EC: 233-466-0 | 1314-13-2 | 1-5% | ⚠️ Hazardous |
| AMMONIA, ANHYDROUS EC: 231-635-3 | 7664-41-7 | 0.5-1% | ⚠️ Hazardous |
| GRAPHENE EC: 801-282-5 | 1034343-98-0 | 0.2-1% | ✓ Non-hazardous |
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
Remove victim to fresh air at once.
Symptoms:
None expected.
🖐️ Skin Contact
rinse thoroughly with lukewarm water, followed by a thorough washing of the affected area with soap and water.
Symptoms:
May be irritating to skin. The product can cause allergic skin reactions (e.g., rashes, welts, dermatitis) in some sensitive individuals. Symptoms of skin overexposure may include redness, itching, and irritation of affected areas.
👁️ Eye Contact
flush with copious amounts of lukewarm water for at least 15 minutes.
Symptoms:
Moderately irritating to the eyes. Symptoms of overexposure may include redness, itching, irritation and watering.
🍽️ Ingestion/Swallowing
If ingested, do not induce vomiting. If product has been swallowed, drink plenty of water or milk IMMEDIATELY. If the patient is vomiting, continue to offer water or milk. Never give water or milk to an unconscious person.
Symptoms:
If product is swallowed, may cause nausea, vomiting and/or diarrhea. Nausea, intestinal discomfort, vomiting and/or diarrhea.
🚨 Immediate Medical Attention Required
Contact the nearest Poison Control Center or local emergency number. Provide an estimate of the time at which the material was ingested and the amount of the substance that was swallowed. If eye irritation occurs, contact a physician. If skin irritation, redness or swelling persists, contact a physician immediately.
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🏭 Engineering Controls
Provide appropriate local exhaust ventilation on open containers. When using keep the product moist at all times. Use in an enclosed process area is recommended. Use in a well-ventilated area. Do not use in a confined area or areas with little or no air movement.
🧤 Hand Protection
AVOID SKIN CONTACT. Select and use gloves and/or protective clothing to prevent skin contact based on the results of an exposure assessment. Consult with your glove and/or protective clothing manufacturer for selection of appropriate compatible materials. Gloves made from the following material(s) are recommended: Nitrile Rubber. If necessary, refer to U.S. OSHA 29 CFR 1910.138, the appropriate standards of Canada, of the E.C. member states.
👁️ Eye Protection
AVOID EYE CONTACT. Wear safety glasses. If necessary, refer to U.S. OSHA 29 CFR 1910.133, Canadian standards, or the European Standard EN166.
😷 Respiratory Protection
Avoid breathing of vapors, mists or spray. No special respiratory protection is required under typical circumstances of use or handling. If necessary, use only respiratory protection authorized per U.S. OSHA's requirement in 29 CFR 1910.134, or applicable U.S. state regulations, or the appropriate standards of Canada, its provinces, E.C. member states, or Australia.
🦺 Skin/Body Protection
No special body protection is required under typical circumstances of use and handling. If necessary, refer to appropriate standards of Canada, the E.C. member states, or U.S. OSHA.
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
🏷️ UN Number
UN2924
📦 Proper Shipping Name
FLAMMABLE LIQUID, CORROSIVE, N.O.S.
⚠️ Transport Hazard Class
3
📋 Packing Group
II
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for STARKE LIQUID THOR?
The signal word for this substance is "danger".
What is the physical form of STARKE LIQUID THOR?
STARKE LIQUID THOR is a clear liquid appearing as clear liquid . It has ammonia and solvent like odor.
What is STARKE LIQUID THOR used for?
Stain and Spill Treatment
What are the hazard statements for STARKE LIQUID THOR?
This substance has 4 hazard statements: H225: Highly flammable liquid and vapor. H314: Causes severe skin burns and eye damage. H302: Harmful if swallowed. H412: May cause long lasting harmful effects to aquatic life