NextSDS Logo
Safety Data Sheet EN

STARKE SHIELD - FABRIC GUARD

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
STARKE SHIELD - FABRIC GUARD
Chemical Name
MIXTURE

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Stain and Spill Treatment

Manufacturers & Suppliers

S

Starke Yacht Surface Technologies

distributor

17000 Alico Commerce Ct., Suite 101, Fort Myers, FL 33912

+1 (800) 203-5315

Emergency Contacts

John Watkins

+1 (239) 851-6030

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Flam. Liq. Cat. 3
Asp. Tox. Cat. 1
STOT SE Cat. 3
Eye Irrit. Cat. 2
Skin Irrit. Cat. 3

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H226 Flammable liquid and vapor.
H304 May be fatal if swallowed and enters airways.
H316 Causes mild skin irritation.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.

Precautionary Statements

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P233 Keep container tightly closed.
P240 Ground and bond container and receiving equipment.
P241 Use explosion-proof (electrical/ventilating/lighting) equipment.
P242 Use non-sparking tools.
P243 Take action to prevent static discharges.
P261 Avoid breathing dust/fume/gas/mist/vapors/spray.
P262 Do not get in eyes, on skin, or on clothing.
P264 Wash thoroughly after handling.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves/protective clothing/ eye protection/face protection.
P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse affected areas with water [or shower].
P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P331 Do not induce vomiting.
P370 + P378 In case of fire: Use CO2, BC powder, dry chemical, foam, water mist to extinguish.
P403 + P235 Store in a well-ventilated place. Keep cool.
P405 Store locked up.
P501 Dispose of contents/container to a licensed treatment, storage or disposal facility (TSDF).
IF SWALLOWED: Get emergency medical help immediately.
If eye irritation persists: Get medical help.
If skin irritation occurs: Get medical help.
Get medical help if you feel unwell.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Chemical Name CAS Number Concentration Hazardous
PROPRIETARY INGREDIENTS --- --- No
ODORLESS MINERAL SPIRITS EC: 265-150-3 64742-48-9 90% Yes
STODDARD SOLVENT EC: 232-489-3 8052-41-3 1 - 5% Yes
TITANIUM TETRAISOPROPANOLATE EC: 208-909-6 546-68-9 1 - 5% Yes

<0.1% Benzene

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove victim to fresh air at once.

Symptoms: None expected. High concentrations of vapors can cause drowsiness, dizziness, headaches and nausea.

Skin contact

If irritation occurs and product is on the skin, rinse thoroughly with lukewarm water, followed by a thorough washing of the affected area with soap and water. If irritation, redness or swelling persists, contact a physician immediately.

Symptoms: May be irritating to skin. The product can cause allergic skin reactions (e.g., rashes, welts, dermatitis) in some sensitive individuals. Symptoms of skin overexposure may include redness, itching, and irritation of affected areas.

Eye contact

If product gets in the eyes, flush with copious amounts of lukewarm water for at least 15 minutes. If irritation occurs, contact a physician.

Symptoms: Moderately irritating to the eyes. Symptoms of overexposure may include redness, itching, irritation and watering.

Ingestion

If ingested, do not induce vomiting. If product has been swallowed, drink plenty of water or milk IMMEDIATELY. If the patient is vomiting, continue to offer water or milk. Never give water or milk to an unconscious person.

Symptoms: If product is swallowed, may cause nausea, vomiting and/or diarrhea. Nausea, intestinal discomfort, vomiting and/or diarrhea.

Immediate Medical Attention

If irritation occurs (eyes), contact a physician. If irritation, redness or swelling persists (skin), contact a physician immediately. Contact the nearest Poison Control Center or local emergency number (ingestion).

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Provide appropriate local exhaust ventilation on open containers. When using keep the product moist at all times. Use in an enclosed process area is recommended. Use in a well-ventilated area. Do not use in a confined area or areas with little or no air movement.

Hands

AVOID SKIN CONTACT . Select and use gloves and/or protective clothing to prevent skin contact based on the results of an exposure assessment. Consult with your glove and/or protective clothing manufacturer for selection of appropriate compatible materials. Gloves made from the following material(s) are recommended: Nitrile Rubber. If necessary, refer to U.S. OSHA 29 CFR 1910.138, the appropriate standards of Canada, of the E.C. member states.

Eyes

AVOID EYE CONTACT . Wear safety glasses. If necessary, refer to U.S. OSHA 29 CFR 1910.133, Canadian standards, or the European Standard EN166.

Respiratory

Avoid breathing of vapors, mists or spray. No special respiratory protection is required under typical circumstances of use or handling. If necessary, use only respiratory protection authorized per U.S. OSHA's requirement in 29 CFR 1910.134, or applicable U.S. state regulations, or the appropriate standards of Canada, its provinces, E.C. member states, or Australia.

Skin/Body

No special body protection is required under typical circumstances of use and handling. If necessary, refer to appropriate standards of Canada, the E.C. member states, or U.S. OSHA.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Upper Explosive Limit
6% vol
Voc Content
---
Melting Point
---
Physical State Data
liquid
Colour Intensity
---
Vapor Density
---
Decomposition Temperature
---
Crystallisation Point
---
Vapor Pressure
1.33 kPa @ 63.2 C
Flammability
---
Form
liquid
Cloud Point
---
Molecular Weight
---
Boiling Point
157.2 C (314.9 F) @ 101.3 kPa
Relative Evaporation Rate
---
Bulk Density
---
Explosive Limits
---
Appearance
Colorless liquid
Odor Threshold
---
Relative Density
0.75-0.77 g/cm [3] @ 25 C
Partition Coefficient
---
Freezing Point
---
Auto Ignition Temperature
343 C (694 F)
Physical State
---
Metal Corrosion
---
Softening Point
---
State Under Standard Conditions
---
Ph
7
Dynamic Viscosity
---
Solubility In Fat
---
Lower Explosive Limit
0.7% vol
Kinematic Viscosity
---
Density
---
Colour
Colorless
Solubility
Soluble in water
Properties Status
---
Solidification Point
---
Solubility In Water
Soluble in water
Evaporation Rate
---
Flash Point
49 C (120F) 101.3 kPa 120F @ 1 atm
Odor
Characteristic
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN1993
Shipping Name
FLAMMABLE LIQUID, N.O.S.
Transport Class
3
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for STARKE SHIELD - FABRIC GUARD?

The signal word is danger.

What is the solubility of STARKE SHIELD - FABRIC GUARD?

Soluble in water

What is STARKE SHIELD - FABRIC GUARD used for?

Stain and Spill Treatment

What are the hazard statements for STARKE SHIELD - FABRIC GUARD?

This substance has 5 hazard statements:

  • H226: Flammable liquid and vapor.
  • H304: May be fatal if swallowed and enters airways.
  • H316: Causes mild skin irritation.
  • H319: Causes serious eye irritation.
  • H336: May cause drowsiness or dizziness.