Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- UltraPure™ Phenol:Chloroform:Isoamyl Alcohol (25:24:1, v/v)
- Product Code
- 15593031
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
For research use only. Not intended for human or animal diagnostic or therapeutic uses.
Manufacturers & Suppliers
Life Technologies
5791 Van Allen Way, PO Box 6482, Carlsbad, CA 92008
+1 760 603 7200
LIFE TECHNOLOGIES LIMITED
3 FOUNTAIN DRIVE, INCHINNAN BUSINESS PARK, PAISLEY, PA4 9RF, SCOTLAND
44-141 814-6100
Emergency Contacts
Emergency Contact
866-536-0631
Emergency Contact
301-431-8585
Emergency Contact
++1-301-431-8585
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS06
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Consult a doctor if necessary.
Rinse immediately with plenty of water and seek medical advice. Call a doctor immediately. Take off all contaminated clothing and wash it before re-use.
In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Call a doctor immediately.
Call a doctor or poison control centre immediately. Never give anything by mouth to an unconscious person. Rinse mouth. Do NOT induce vomiting.
Immediate Medical Attention
Call a doctor immediately.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Dry chemical.
Firefighter Protection
Wear self-contained breathing apparatus and protective suit.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Prevent further leakage or spillage if safe to do so.
Soak up with inert absorbent material. Take up mechanically, placing in appropriate containers for disposal. Pick up and transfer to properly labelled containers.
Materials: inert absorbent material
Related Products
Similar products with comparable safety profiles
Phenol, Liquified
---
2-Propanol 70 %, pure
CAS: 67-63-0
Isopropyl alcohol, 70% in water
---
Deuterated and 13C Phenols <0,2%) in Isopropanol II
---
Phenols Mix (19C) standard solution
---
Chloroform, HPLC Grade
CAS: 67-66-3
Deuterated and 13C Phenols <0,2%) in Isopropanol III
---
Acetonitrile 50% / Water 47.5% / Trifluoroacetic acid 2.5% HiPerSolv CHROMANORM® Solution OS (Bruker Organic Solvent)
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin, eyes and clothing. Avoid contact with skin and eyes.
Keep in properly labelled containers. Keep in a dry, cool and well-ventilated place. Keep container tightly closed.
Keep away from heat, sparks, flame and other sources of ignition (i.e., pilot lights, electric motors and static electricity).
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation, especially in confined areas. Use in a chemical fume hood. Ensure that eyewash stations and safety showers are close to the workstation location.
Impervious gloves: Viton (R), Neoprene.
Safety glasses with side-shields. Goggles.
In case of insufficient ventilation, wear suitable respiratory equipment. S23 - Do not breathe gas/fumes/vapour/spray.
Lightweight protective clothing.
Prevent product from entering drains.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No information available.
No information available.
Strong oxidising agents, Strong bases, Strong acids, Halogenated compounds.
Thermal decomposition can lead to release of irritating and toxic gases and vapours.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of contents/containers in accordance with local regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN2810
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for UltraPure™ Phenol:Chloroform:Isoamyl Alcohol (25:24:1, v/v)?
The signal word is danger.
What is the physical form of UltraPure™ Phenol:Chloroform:Isoamyl Alcohol (25:24:1, v/v)?
UltraPure™ Phenol:Chloroform:Isoamyl Alcohol (25:24:1, v/v) is a liquid appearing as no information available . It has no information available odor.
What is UltraPure™ Phenol:Chloroform:Isoamyl Alcohol (25:24:1, v/v) used for?
For research use only. Not intended for human or animal diagnostic or therapeutic uses.
What are the hazard statements for UltraPure™ Phenol:Chloroform:Isoamyl Alcohol (25:24:1, v/v)?
This substance has 8 hazard statements:
- H301: Toxic if swallowed
- H311: Toxic in contact with skin
- H314: Causes severe skin burns and eye damage
- H331: Toxic if inhaled
- H341: Suspected of causing genetic defects
- H351: Suspected of causing cancer
- H373: May cause damage to organs through prolonged or repeated exposure
- H401: Toxic to aquatic life
What is the melting point of UltraPure™ Phenol:Chloroform:Isoamyl Alcohol (25:24:1, v/v)?
The melting point is No data available and the boiling point is No data available.