NextSDS Logo
Safety Data Sheet EN

Isopropyl alcohol, 70% in water

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Isopropyl alcohol, 70% in water
Product Code
A459-1; A459-20; A459-4; A459-500; XXA459N119; A459-200; XXA45910LI; NC1883130; NC1321602; NC2070308; NC2401443
Synonyms
IPA; Isopropanol (70% aqueous solution)

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Laboratory chemicals.

Uses advised against

Food, drug, pesticide or biocidal product use.

Manufacturers & Suppliers

F

Fisher Scientific Company

distributor

One Reagent Lane, Fair Lawn, NJ 07410

(201) 796-7100

F

Fisher Scientific - Fairlawn

manufacturer

One Reagent Lane, Fairlawn, NJ 07410 USA

201-796-7100

Emergency Contacts

CHEMTREC®

800-424-9300

CHEMTREC®

001-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Flammable liquids Cat. 2
Serious Eye Damage/Eye Irritation Cat. 2
Specific target organ toxicity (single exposure) Cat. 3

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

Hazard Statements

H225 Highly flammable liquid and vapor
H319 Causes serious eye irritation
H336 May cause drowsiness or dizziness

Precautionary Statements

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking
P233 Keep container tightly closed
P235 Keep cool
P240 Ground and bond container and receiving equipment
P241 Use explosion-proof electrical/ventilating/lighting equipment
P242 Use non-sparking tools
P243 Take action to prevent static discharges
P261 Avoid breathing dust/fume/gas/mist/vapors/spray
P264 Wash face, hands and any exposed skin thoroughly after handling
P271 Use only outdoors or in a well-ventilated area
P280 Wear protective gloves/protective clothing/eye protection/face protection
P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower
P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing
P312 Call a POISON CENTER or doctor if you feel unwell
P337 + P313 If eye irritation persists: Get medical advice/attention
P370 + P378 In case of fire: Use CO2, dry chemical, or foam to extinguish
P403 + P233 Store in a well-ventilated place. Keep container tightly closed
P405 Store locked up
P501 Dispose of contents/container to an approved waste disposal plant

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Isopropyl alcohol 67-63-0 64.7% No
Water 7732-18-5 35.3% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove to fresh air. If not breathing, give artificial respiration. Get medical attention if symptoms occur.

Symptoms: Difficulty in breathing. Inhalation of high vapor concentrations may cause symptoms like headache, dizziness, tiredness, nausea and vomiting

Skin contact

Wash off immediately with soap and plenty of water. If skin irritation persists, call a physician.

Eye contact

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.

Ingestion

Clean mouth with water and drink afterwards plenty of water.

Immediate Medical Attention

Get medical attention.

Medical Treatment

Treat symptomatically

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

CO2, dry chemical, dry sand, alcohol-resistant foam. Water mist may be used to cool closed containers.

Unsuitable media

Water may be ineffective

Specific hazards

Flammable. Risk of ignition. Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Containers may explode when heated. Vapors may form explosive mixtures with air.

Firefighter Protection

As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protective equipment as required. Ensure adequate ventilation. Remove all sources of ignition. Take precautionary measures against static discharges.

Environmental

Should not be released into the environment. See Section 12 for additional Ecological Information.

Cleanup methods

Soak up with inert absorbent material. Keep in suitable, closed containers for disposal. Remove all sources of ignition. Use spark-proof tools and explosion-proof equipment.

Materials: inert absorbent material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Wear personal protective equipment/face protection. Do not get in eyes, on skin, or on clothing. Ensure adequate ventilation. Avoid ingestion and inhalation. Keep away from open flames, hot surfaces and sources of ignition. Use only non-sparking tools. To avoid ignition of vapors by static electricity discharge, all metal parts of the equipment must be grounded. Take precautionary measures against static discharges.

Storage

Keep containers tightly closed in a dry, cool and well-ventilated place. Keep away from heat, sparks and flame. Flammables area.

Fire prevention

Keep away from open flames, hot surfaces and sources of ignition. Use only non-sparking tools. To avoid ignition of vapors by static electricity discharge, all metal parts of the equipment must be grounded. Take precautionary measures against static discharges.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Ensure adequate ventilation, especially in confined areas. Use explosion-proof electrical/ventilating/lighting equipment. Ensure that eyewash stations and safety showers are close to the workstation location.

Hands

Wear appropriate protective gloves

Eyes

Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.

Respiratory

Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced. Recommended Filter type: Organic gases and vapours filter. Type A. Brown. conforming to EN14387.

Skin/Body

Wear appropriate protective gloves and clothing to prevent skin exposure.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
Colorless
Colour
Colorless
Colour Intensity
---
Form
---
Odor
Alcohol-like
Odor Threshold
No information available
Ph
No data available
Melting Point
-88 °C / -126.4 °F
Boiling Point
82 °C / 179.6 °F
Flash Point
18 °C / 64.4 °F
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
1.7 (Butyl Acetate = 1.0)
Vapor Pressure
33 mmHg @ 20°C
Vapor Density
2.1 (Air = 1.0)
Relative Density
0.7850
Bulk Density
Not applicable
Density
---
Flammability
Highly flammable
Upper Explosive Limit
12.7 vol %
Lower Explosive Limit
2.0 vol %
Explosive Limits
---
Auto Ignition Temperature
399 °C / 750.2 °F
Decomposition Temperature
No data available
Solubility
---
Partition Coefficient
0.05
Solubility In Water
Miscible
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions.

Reactivity

None known, based on information available

Hazardous reactions

None under normal processing. Hazardous polymerization does not occur.

Avoid

Incompatible products. Heat, flames and sparks. Keep away from open flames, hot surfaces and sources of ignition.

Incompatible

Strong oxidizing agents, Strong acids, Metals

Decomposition

Carbon monoxide (CO), Carbon dioxide (CO2), peroxides

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN1219
Shipping Name
ISOPROPANOL
Transport Class
3
Packing Group
II
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is Isopropyl alcohol, 70% in water known by?

Isopropyl alcohol, 70% in water is also known as: IPA; Isopropanol (70% aqueous solution)

What is the hazard signal word for Isopropyl alcohol, 70% in water?

The signal word is danger.

What is the physical form of Isopropyl alcohol, 70% in water?

Isopropyl alcohol, 70% in water is a liquid appearing as colorless with colorless color. It has alcohol-like odor.

What is Isopropyl alcohol, 70% in water used for?

Laboratory chemicals.

What are the hazard statements for Isopropyl alcohol, 70% in water?

This substance has 3 hazard statements:

  • H225: Highly flammable liquid and vapor
  • H319: Causes serious eye irritation
  • H336: May cause drowsiness or dizziness

What is the melting point of Isopropyl alcohol, 70% in water?

The melting point is -88 °C / -126.4 °F and the boiling point is 82 °C / 179.6 °F.