Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- PENICILLIN STREPTOMYCIN SOL
- Product Code
- 15070063
- Chemical Name
- Not Applicable
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- No registration number is given yet for this substance / substances in this mixture since the annual import quantity is less than one tonnage per annum or the transition period for its registration according to Article 23 of REACH has not yet expired.
Identified Uses
For research use only. SU22 - Professional uses: Public domain (administration, education, entertainment, services, craftsmen), PROC15 - Use as laboratory reagent, PC21 - Laboratory chemicals, SU24 - Scientific research and development
Uses advised against
Not for consumer use.
Manufacturers & Suppliers
LIFE TECHNOLOGIES EUROPE BV
manufacturer
KWARTSWEG 2, 2665 NN BLEISWIJK, NETHERLANDS
31-(0)180 392 400
Life Technologies Limited
manufacturer
3 Fountain Drive, Inchinnan Business Park, Paisley, PA4 9RF, UK
+44 (0)141 814 6100
Emergency Contacts
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
CHEMTREC
1-703-741-5970
CHEMTREC Ireland (Dublin)
+(353)-19014670
EN, GA
CHEMTREC UK (London)
+(44)-870-8200418
EN
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air. If not breathing, give artificial respiration. If symptoms persist, call a doctor.
Symptoms: breathing difficulties
Wash off immediately with plenty of water for at least 15 minutes. Remove and wash contaminated clothing and gloves, including the inside, before re-use. Immediate medical attention is required.
Symptoms: allergic skin reaction
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Immediate medical attention is required.
Never give anything by mouth to an unconscious person. Do not induce vomiting without medical advice. Get medical attention if symptoms occur.
Immediate Medical Attention
Immediate medical attention is required for skin and eye contact. Get medical advice/attention if exposed or concerned.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Wasr spray. Carbon dioxide (CO₂). Foam. Dry chemical. No information available.
Not known.
Firefighter Protection
Wear self-contained breathing apparatus and protective suit.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid discharge into drains and waterways whenever possible.
Soak up with inert absorbent material.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Always wear recommended Personal Protective Equipment. See Section 8 for more detail. Do not get in eyes, on skin, or on clothing. Do not ingest. If during normal use the material presents a respiratory hazard, use adequate ventilation and/or wear appropriate respirator.
Keep in a dry, cool and well-ventilated place. Keep in properly labelled containers. Store in accordance with local regulations.
Do not get in eyes, on skin, or on clothing. Do not ingest.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation, especially in confined areas.
Glove material: Nitrile rubber with thickness (mm) :5 Break through time (hours) :1 Recommended glove type has not been tested for use with this product. Information is based on professional knowledge
Tight sealing safety goggles.
In case of insufficient ventilation wear respirators and components tested and approved under appropriate government standards.
Wear laboratory coat for body protection.
No special environmental precautions required.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
None known.
Hazardous reaction has not been reported.
None known.
No dangerous reaction known under conditions of normal use.
No known hazardous decomposition products.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The generation of waste should be avoided or minimized wherever possible.
This material and its container must be disposed of in according to approved disposal technique.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Not Applicable
- Shipping Name
- Not Applicable
- Transport Class
- Not Applicable
- Packing Group
- Not Applicable
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for PENICILLIN STREPTOMYCIN SOL?
The signal word is danger.
What is the physical form of PENICILLIN STREPTOMYCIN SOL?
PENICILLIN STREPTOMYCIN SOL is a liquid appearing as liquid . It has mixture has not been tested odor.
What is the solubility of PENICILLIN STREPTOMYCIN SOL?
Mixture has not been tested
What is PENICILLIN STREPTOMYCIN SOL used for?
For research use only. SU22 - Professional uses: Public domain (administration, education, entertainment, services, craftsmen), PROC15 - Use as laboratory reagent, PC21 - Laboratory chemicals, SU24 - Scientific research and development
What are the hazard statements for PENICILLIN STREPTOMYCIN SOL?
This substance has 4 hazard statements:
- H317: May cause an allergic skin reaction
- H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled
- H360: May damage fertility or the unborn child
- H371: May cause damage to organs
What is the melting point of PENICILLIN STREPTOMYCIN SOL?
The melting point is No data and the boiling point is No data.