Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- AMPICILLIN SODIUM SALT STERILE
- Product Code
- 11593027
- Chemical Name
- Not Applicable
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
For research use only
Uses advised against
Not for consumer use.
Manufacturers & Suppliers
LIFE TECHNOLOGIES EUROPE BV
manufacturer
KWARTSWEG 2, 2665 NN BLEISWIJK, NETHERLANDS
31-(0)180 392 400
Life Technologies Limited
manufacturer
3 Fountain Drive, Inchinnan Business Park, Paisley, PA4 9RF, UK
+44 (0)141 814 6100
Emergency Contacts
CHEMTREC
1-800-424-9300
CHEMTREC
+1 703-527-3887
CHEMTREC
+1 703-741-5970
CHEMTREC Ireland
+(353)-19014670
EN, GA
CHEMTREC UK
+(44)-870-8200418
EN
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Sodium [2S-[2.alpha.,5.alpha.,6.beta.(S*)]-6-(aminophenylacetamido)-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate EC: 200-708-1 | 69-52-3 | 60 - 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air. If not breathing, give artificial respiration. If symptoms persist, call a doctor. Remove person to fresh air and keep comfortable for breathing.
Symptoms: May cause allergy or asthma symptoms or breathing difficulties if inhaled
Wash off immediately with plenty of water for at least 15 minutes. Remove and wash contaminated clothing and gloves, including the inside, before re-use. Immediate medical attention is required. Take off immediately all contaminated clothing. Rinse skin with water/ shower.
Symptoms: Causes skin irritation, May cause an allergic skin reaction
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Immediate medical attention is required. Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Symptoms: Causes serious eye irritation
Never give anything by mouth to an unconscious person. Do not induce vomiting without medical advice. Get medical attention if symptoms occur.
Immediate Medical Attention
Immediate medical attention is required.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray. Carbon dioxide (CO2). Foam. Dry chemical. No information available.
Not known.
Firefighter Protection
Wear self-contained breathing apparatus and protective suit.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ensure adequate ventilation. Avoid contact with skin, eyes or clothing. Use personal protection equipment.
No special environmental precautions required. Avoid discharge into drains and waterways whenever possible.
Soak up with inert absorbent material.
Materials: inert absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Always wear recommended Personal Protective Equipment. See Section 8 for more detail. Do not get in eyes, on skin, or on clothing. Do not ingest. If during normal use the material presents a respiratory hazard, use adequate ventilation and/or wear appropriate respirator.
Keep in a dry, cool and well-ventilated place. Keep in properly labelled containers. Store in accordance with local regulations.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
None known.
Hazardous reaction has not been reported.
None known.
No dangerous reaction known under conditions of normal use.
No known hazardous decomposition products.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
The environmental impact of this product has not been fully investigated.
Persistence and degradability
No information available.
Bioaccumulative potential
No information available.
Mobility in soil
No information available.
Results of PBT and vPvB assessment
No information available.
Endocrine disrupting properties
No information available.
Other adverse effects
No information available.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The generation of waste should be avoided or minimized wherever possible. This material and its container must be disposed of in according to approved disposal technique.
Disposal of this product, its solutions or of any by-products, shall comply with the requirements of all applicable local, regional or national/federal regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for AMPICILLIN SODIUM SALT STERILE?
The signal word is danger.
What is the physical form of AMPICILLIN SODIUM SALT STERILE?
AMPICILLIN SODIUM SALT STERILE is a solid appearing as powder . It has mixture has not been tested odor.
What is the solubility of AMPICILLIN SODIUM SALT STERILE?
Mixture has not been tested
What is AMPICILLIN SODIUM SALT STERILE used for?
For research use only
What are the hazard statements for AMPICILLIN SODIUM SALT STERILE?
This substance has 4 hazard statements:
- H315: Causes skin irritation
- H317: May cause an allergic skin reaction
- H319: Causes serious eye irritation
- H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled
What is the melting point of AMPICILLIN SODIUM SALT STERILE?
The melting point is °C Mixture has not been tested and the boiling point is °C Mixture has not been tested.