Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Sodium dichloroisocyanurate
- Product Code
- 218928
- Chemical Name
- Sodium dichloroisocyanurate
Regulatory Identifiers
- CAS Number
- 2893-78-9 Check regulations →
- REACH No.
- 01-2119489371-33-XXXX
Identified Uses
Laboratory chemicals, Manufacture of substances
Manufacturers & Suppliers
Sigma-Aldrich BVBA/SPRL
distributor
Pegasuslaan 5, B-1831 DIEGEM
+32 (0)3 899-1301
Emergency Contacts
CHEMTREC
+(32) 28 083237
Anti-poison centre
070 245245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS03
GHS05
GHS07
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Dichloroisocyanuric acid sodium salt EC: 220-767-7 | 2893-78-9 | 100% | Yes |
Aldrich - 218928 Page 2 of 9 The life science business of Merck operates as MilliporeSigma in the US and Canada
First Aid Measures
Emergency procedures for chemical exposure incidents
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
Wash off with soap and plenty of water. Consult a physician.
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Dry powder
Carbon oxides, Nitrogen oxides (NOx), Hydrogen chloride gas, Sodium oxides
Firefighter Protection
Wear self-contained breathing apparatus for firefighting if necessary.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate personnel to safe areas.
Discharge into the environment must be avoided.
Sweep up and shovel.
Related Products
Similar products with comparable safety profiles
Sodium dichloroisocyanurate dihydrate
CAS: 51580-86-0
Dichloroisocyanuric acid sodium salt
CAS: 2893-78-9
Trichloroisocyanuric acid
CAS: 87-90-1
Sodium cyanide
CAS: 143-33-9
SODIUM CHLORIDE
---
SODIUM CHLORIDE
CAS: 7647-14-5
Sodium chlorate
CAS: 7775-09-9
Sodium thiocyanate
CAS: 540-72-7
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin and eyes. Avoid formation of dust and aerosols.
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Keep away from sources of ignition - No smoking. Keep away from heat and sources of ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Handle in accordance with good industrial hygiene and safety practice.
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy the specifications of Regulation (EU) 2016/425 and the standard EN 374 derived from it.
Safety glasses with side-shields conforming to EN166 Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Where risk assessment shows air-purifying respirators are appropriate use a full-face particle respirator type N100 (US) or type P3 (EN 143) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).
Complete suit protecting against chemicals, The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.
Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
No data available
No data available
No data available
Strong bases, Strong oxidizing agents
Hazardous decomposition products formed under fire conditions. - Carbon oxides, Nitrogen oxides (NOx), Hydrogen chloride gas, Sodium oxides. Other decomposition products - No data available. In the event of fire: see section 5
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Burn in a chemical incinerator equipped with an afterburner and scrubber but exert extra care in igniting as this material is highly flammable. Offer surplus and non-recyclable solutions to a licensed disposal company.
Burn in a chemical incinerator equipped with an afterburner and scrubber but exert extra care in igniting as this material is highly flammable. Offer surplus and non-recyclable solutions to a licensed disposal company.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 2465
- Shipping Name
- DICHLOROISOCYANURIC ACID SALTS
- Transport Class
- 5.1
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Sodium dichloroisocyanurate?
The signal word is danger.
What is the physical form of Sodium dichloroisocyanurate?
Sodium dichloroisocyanurate is a powder appearing as form: powder colour: white with white color. It has chlorine odor.
What is Sodium dichloroisocyanurate used for?
Laboratory chemicals, Manufacture of substances
What are the hazard statements for Sodium dichloroisocyanurate?
This substance has 4 hazard statements:
- H272: May intensify fire; oxidizer.
- H302: Harmful if swallowed.
- H314: Causes severe skin burns and eye damage.
- H410: Very toxic to aquatic life with long lasting effects.
What is the melting point of Sodium dichloroisocyanurate?
The melting point is No data available and the boiling point is No data available.