Sodium dichloroisocyanurate dihydrate

After inhalation: fresh air. Call in physician.

Take off immediately all contaminated clothing. Rinse skin with water/ shower. Call a physician immediately.

After eye contact: rinse out with plenty of water. Immediately call in ophthalmologist. Remove contact lenses.

After swallowing: make victim drink water (two glasses at most), avoid vomiting (risk of perforation). Call a physician immediately. Do not attempt to neutralise.

Water, Foam, Carbon dioxide (CO2), Dry powder

For this substance/mixture no limitations of extinguishing agents are given.

Combustible. Avoid shock and friction. Risk of dust explosion. Ambient fire may liberate hazardous vapours. In the event of decomposition: danger of explosion! Development of hazardous combustion gases or vapours possible in the event of fire.

Evacuate the danger area, observe emergency procedures, consult an expert.

Do not let product enter drains.

Sweep up and shovel. Take up dry.

Immediately change contaminated clothing. Apply preventive skin protection. Wash hands and face after working with substance. For precautions see section 2.2.

Tightly closed and away from sources of ignition and heat. Observe national regulations.

Immediately change contaminated clothing. Apply preventive skin protection. Wash hands and face after working with substance.

away from sources of ignition and heat

Material : Nitrile rubber, Break through time : 480 min, Glove thickness : 0,11 mm, Protective index : Full contact / Splash contact, Manufacturer : KCL 741 Dermatril® L. Remarks : This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN 16523-1 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).

Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Tightly fitting safety goggles

required when dusts are generated. Our recommendations on filtering respiratory protection are based on the following standards: DIN EN 143, DIN 14387 and other accompanying standards relating to the used respiratory protection system. Recommended Filter : Filter type P2 type: The entrepreneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.

protective clothing

Do not let product enter drains.

The product is chemically stable under standard ambient conditions (room temperature).

sensitive to shock. Risk of explosion if heated under confinement. The following applies in general to flammable organic substances and mixtures: in correspondingly fine distribution, when whirled up a dust explosion potential may generally be assumed. Contact with acids liberates toxic gas.

Risk of ignition or formation of inflammable gases or vapours with: combustible substances, Organic Substances. A risk of explosion and/or of toxic gas formation exists with the following substances: Ammonia, urea, ammonium compounds, Bases, acids. Generates dangerous gases or fumes in contact with: Acids

Strong heating (decomposition).

Strong oxidizing agents

In the event of fire: see section 5

This substance is related to self-reactive substances according to ADR 2.2.41.1.19, IMDG-Code 2.4.2.4.2 and IATA-DGR 3.4.1.3.2. Additional packaging restrictions apply as derived from UN Test Series 6.

This substance is related to self-reactive substances according to ADR 2.2.41.1.19, IMDG-Code 2.4.2.4.2 and IATA-DGR 3.4.1.3.2. Additional packaging restrictions apply as derived from UN Test Series 6.

This substance is related to self-reactive substances according to ADR 2.2.41.1.19, IMDG-Code 2.4.2.4.2 and IATA-DGR 3.4.1.3.2. Additional packaging restrictions apply as derived from UN Test Series 6.