NextSDS Logo
Safety Data Sheet EN

Corticosterone ELISA kit

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Corticosterone ELISA kit
Product Code
ADI-900-097
Synonyms
Not available

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Laboratory chemicals

Uses advised against

No further relevant information available.

Manufacturers & Suppliers

E

Enzo Life Sciences, Inc.

manufacturer

10 Executive Boulevard, Farmingdale, NY 11735, U.S.A.

+800-942-0430

E

Enzo Life Sciences, Inc.

manufacturer

10 Executive Boulevard, Farmingdale, NY 11735, U.S.A.

+41 61 926 8989

Emergency Contacts

Emergency Contact

+1 800-255-3924

Emergency Contact

+01-813-248-0585

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Carc. Cat. 1A H350
Skin Corr. Cat. 1C H314
Acute Tox. Cat. 4 H302
Eye Irrit. Cat. 2 H319
Skin Sens. Cat. 1B H317

GHS Pictograms

GHS05 - Corrosive

GHS05

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H302 Harmful if swallowed.
H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
H350 May cause cancer.

Precautionary Statements

P260 Do not breathe dust/fume/gas/mist/vapours/spray.
P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P310 Immediately call a POISON CENTER/doctor.
P405 Store locked up.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Mixture of substances listed below with nonhazardous additions.

Chemical Name CAS Number Concentration Hazardous
TRIS-HCI EC: 214-684-5 1185-53-1 12.6% Yes
diethanolamine EC: 203-868-0 111-42-2 12% Yes
ethanol EC: 200-578-6 64-17-5 50% Yes
Sodium Dodecyl Sulfate 151-21-3 12% Yes
5-Chloro-2-methyl-4-isothiazolin-3-one EC: 247-500-7 26172-55-4 0.002% Yes
sodium azide EC: 247-852-1 26628-22-8 0.09% Yes
trisodium phosphate dodecahydrate EC: 231-509-8 10101-89-0 10% Yes

For lyophilized materials containing hazardous substances, percent hazardous material determination based on pre-lyophilized volume.

Notes

For lyophilized materials containing hazardous substances, percent hazardous material determination based on pre-lyophilized volume.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air; consult doctor in case of complaints.

Skin contact

Remove contaminated clothing.

Eye contact

Rinse opened eye for several minutes under running water.

Ingestion

If symptoms persist consult doctor.

Immediate Medical Attention

In case of accident, seek medical advice immediately and show the label and the MSDS where possible.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.

Specific hazards

No further relevant information available.

Firefighter Protection

Wear self-contained respiratory protective device. Do not inhale explosion gases or combustion gases. Wear fully protective suit.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Environmental

No special measures required.

Cleanup methods

Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).

Materials: sand, diatomite, acid binders, universal binders, sawdust

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

No special precautions are necessary if used correctly.

Storage

Store tightly sealed in a cool, dry and well ventilated location. Store under lock and key and with access restricted to technical experts or their assistants only.

Fire prevention

No special measures required.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

No further data; see item 7.

Hands

Protective gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/the preparation/the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.

Eyes

Tightly sealed goggles

Respiratory

Not required.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Fluid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
According to product specification
Colour Intensity
---
Form
Fluid
Odor
Characteristic
Odor Threshold
Not determined.
Ph
Not determined.
Melting Point
Undetermined.
Boiling Point
Undetermined.
Flash Point
Not applicable.
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Not determined.
Vapor Pressure
Not determined.
Vapor Density
Not determined.
Relative Density
Not determined.
Bulk Density
---
Density
Not determined.
Flammability
Not applicable.
Upper Explosive Limit
Not determined.
Lower Explosive Limit
Not determined.
Explosive Limits
---
Auto Ignition Temperature
Not determined.
Decomposition Temperature
Not determined.
Solubility
---
Partition Coefficient
Not determined.
Solubility In Water
Not determined.
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
Not determined.
Kinematic Viscosity
Not determined.
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable.

Reactivity

No further relevant information available.

Hazardous reactions

No dangerous reactions known.

Avoid

No further relevant information available.

Incompatible

strong oxidizing agents

Decomposition

No dangerous decomposition products known.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Must not be disposed together with household garbage. Do not allow product to reach sewage system.

Disposal

All waste must be handled in accordance with local, state and federal regulations. This material and its container must be disposed of in a safe way.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
Void
Shipping Name
Void
Transport Class
Void
Packing Group
Void
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

No further relevant information available.

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is Corticosterone ELISA kit known by?

Corticosterone ELISA kit is also known as: Not available

What is the hazard signal word for Corticosterone ELISA kit?

The signal word is danger.

What is the physical form of Corticosterone ELISA kit?

Corticosterone ELISA kit is a fluid with according to product specification color. It has characteristic odor.

What is Corticosterone ELISA kit used for?

Laboratory chemicals

What are the hazard statements for Corticosterone ELISA kit?

This substance has 4 hazard statements:

  • H302: Harmful if swallowed.
  • H314: Causes severe skin burns and eye damage.
  • H317: May cause an allergic skin reaction.
  • H350: May cause cancer.

What is the melting point of Corticosterone ELISA kit?

The melting point is Undetermined. and the boiling point is Undetermined..