Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Vivid® BOMR Substrate, 0.1mg
- Product Code
- P2865
- Chemical Name
- Not Applicable
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- No registration number is given yet for this substance / substances in this mixture since the annual import quantity is less than one tonnage per annum or the transition period for its registration according to Article 23 of REACH has not yet expired.
Identified Uses
For research use only. SU22 - Professional uses: Public domain (administration, education, entertainment, services, craftsmen), PROC15 - Use as laboratory reagent, PC21 - Laboratory chemicals, SU24 - Scientific research and development
Uses advised against
Not for consumer use.
Manufacturers & Suppliers
LIFE TECHNOLOGIES EUROPE BV
manufacturer
KWARTSWEG 2, 2665 NN BLEISWIJK, NETHERLANDS
31-(0)180 392 400
Life Technologies Limited
manufacturer
3 Fountain Drive, Inchinnan Business Park, Paisley, PA4 9RF, UK
+44 (0)141 814 6100
Emergency Contacts
CHEMTREC
1-800-424-9300
CHEMTREC
+1 703-527-3887
CHEMTREC
+1 703-741-5970
CHEMTREC Ireland (Dublin)
+(353)-19014670
EN
CHEMTREC UK (London)
+(44)-870-8200418
EN
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Acetonitrile EC: 200-835-2 | 75-05-8 | 95 - 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air. If not breathing, give artificial respiration. If symptoms persist, call a doctor.
Wash off immediately with plenty of water for at least 15 minutes. Remove and wash contaminated clothing and gloves, including the inside, before re-use. Immediate medical attention is required.
Symptoms: Harmful in contact with skin
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Immediate medical attention is required.
Symptoms: Causes serious eye irritation
Never give anything by mouth to an unconscious person. Do not induce vomiting without medical advice. Get medical attention if symptoms occur.
Symptoms: Harmful if swallowed
Immediate Medical Attention
Immediate medical attention is required for skin and eye contact. Call a POISON CENTER or doctor/physician if you feel unwell after ingestion.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Dry chemical. Alcohol resistant foam. Water spray. Carbon dioxide (CO2).
No information available.
Not known.
Firefighter Protection
Wear self-contained breathing apparatus and protective suit.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
ELIMINATE all ignition sources (no smoking, flares, sparks or flames in immediate area). Avoid breathing vapours or mists. Ensure adequate ventilation.
Allow to evaporate. Absorb spill with inert material (e.g. dry sand or earth), then place in a chemical waste container. Ventilate the area.
Dyke for later disposal and cover with wet sand or earth. Immediately contact emergency personnel.
No special environmental precautions required.
Allow to evaporate. Absorb spill with inert material, then place in a chemical waste container.
Materials: dry sand or earth
Related Products
Similar products with comparable safety profiles
1X eBioscience TMB Substrate Solution
---
TMB-Plus Substrate-Chromogen
---
BISOMER® BZMA
---
Minimum Essential Medium (MEM) (1X), liquid
---
DAB Substrate Buffer
---
DAB Substrate Buffer
---
Molsiv Adsorbents 4A-DG 1/16
---
LB Broth (Luria/Miller) granulated, for molecular biology
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Always wear recommended Personal Protective Equipment. Avoid contact with eyes, skin and clothing. Do not breathe vapors. When using do not smoke, eat or drink. Ground and bond containers when transferring material. See Section 8 for more detail.
Keep in a dry, cool and well-ventilated place. Keep container tightly closed. Keep in properly labelled containers. Store in accordance with local regulations.
When using do not smoke, eat or drink.
ELIMINATE all ignition sources (no smoking, flares, sparks or flames in immediate area).
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation, especially in confined areas.
Wear suitable gloves. Glove material: Compatible chemical-resistant gloves.
Tight sealing safety goggles.
In case of insufficient ventilation wear respirators and components tested and approved under appropriate government standards.
Wear laboratory coat for body protection.
No special environmental precautions required.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
None known.
Hazardous reaction has not been reported.
High temperature. Proximity to sources of ignition.
oxidising agents. Acids. Bases.
No known hazardous decomposition products.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The generation of waste should be avoided or minimized wherever possible.
This material and its container must be disposed of in according to approved disposal technique.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1648
- Shipping Name
- Acetonitrile
- Transport Class
- 3
- Packing Group
- II
Not Applicable
Not Applicable
Not Applicable
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Vivid® BOMR Substrate, 0.1mg?
The signal word is danger.
What is the physical form of Vivid® BOMR Substrate, 0.1mg?
Vivid® BOMR Substrate, 0.1mg is a lyophilized powder appearing as lyophilized powder . It has mixture has not been tested odor.
What is the solubility of Vivid® BOMR Substrate, 0.1mg?
Completely miscible with water
What is Vivid® BOMR Substrate, 0.1mg used for?
For research use only. SU22 - Professional uses: Public domain (administration, education, entertainment, services, craftsmen), PROC15 - Use as laboratory reagent, PC21 - Laboratory chemicals, SU24 - Scientific research and development
What are the hazard statements for Vivid® BOMR Substrate, 0.1mg?
This substance has 5 hazard statements:
- H225: Highly flammable liquid and vapour
- H302: Harmful if swallowed
- H312: Harmful in contact with skin
- H319: Causes serious eye irritation
- H332: Harmful if inhaled
What is the melting point of Vivid® BOMR Substrate, 0.1mg?
The melting point is Mixture has not been tested and the boiling point is No data available.