Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Molsiv Adsorbents 4A-DG 1/16
- Product Code
- 000000016558
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Adsorbents
Manufacturers & Suppliers
UOP N.V.
global supplier
Noorderlaan 147 2030 Antwerp
+32-3-5409911
UOP CH
global supplier
Z.A. La Pice 16 1180 Rolle
+41-21-6953039
Emergency Contacts
ChemTrec
+1-703-527-3887
Medical
+1-303-389-1414
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Remaining components of this product are non-hazardous and/or are present at concentrations below reportable limits.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Zeolite, cuboidal, crystalline, synthetic, non-fibrous | --- | 100% | No |
| Kwarts (kristallijn silica) EC: 238-878-4 | 14808-60-7 | 10% | No |
Occupational Exposure Limit(s), if available, are listed in Section 8. For the full text of the H-Statements mentioned in this Section, see Section 16.
Notes
N.C .* - Non-hazardous substance - for information only
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air. If symptoms persist, call a physician.
Wash off with soap and plenty of water. If skin irritation persists, call a physician.
Rinse immediately with plenty of water for at least 15 minutes. If eye irritation persists, consult a physician.
Drink at least 2 glasses of water. Obtain medical attention. Never give anything by mouth to an unconscious person.
Immediate Medical Attention
This product is a desiccant and generates heat as it adsorbs water. Treat symptomatically. The used product can contain material of a hazardous nature. Identify that material and treat symptomatically.
Medical Treatment
Treat symptomatically. Identify that material and treat symptomatically.
Related Substances
Similar chemicals with comparable safety profiles
Molsiv Adsorbents 13X HP 10x20
---
Dissolvine Am2-45
---
SODALIME (CO2 ABSORBENT-SODA LIME U.S.P./ N.F.)
---
CANSOLV absorbent DS
---
Liquid Maltodextrin; Anti-foam 20-30 mg/kg
CAS: 9050-36-6
DALSORB® F50, D-SOL® D60, MAGNESOL® Cartridge Grade, MAGNESOL® Cartridge P, MAGNESOL® Haze-Out, MAGNESOL® Super Flow, MAGNESOL® HMR-LS, MAGNESOL® Polysorb 30-40, MAGNESOL® Powersorb, MAGNESORB® 1500R, MAGNESOL® MP120
---
CANSOLV Absorbant DC-103
---
Micro-Sorb 30/60 LVM
---
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation, especially in confined areas.
Protective gloves
Safety glasses Safety goggles
In case of insufficient ventilation, wear suitable respiratory equipment. Disposable filtering half mask Class FFP3 (EN149). Half mask with a particle filter P3 (EN143).
Lightweight protective clothing
Handle in accordance with local environmental regulations and good industrial practices.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Molsiv Adsorbents 4A-DG 1/16?
The signal word is no signal word.
What is the physical form of Molsiv Adsorbents 4A-DG 1/16?
Molsiv Adsorbents 4A-DG 1/16 is a solid with white to tan color.
What is Molsiv Adsorbents 4A-DG 1/16 used for?
Adsorbents
What is the melting point of Molsiv Adsorbents 4A-DG 1/16?
The melting point is > 400 and the boiling point is Not applicable.