Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Sodium acetate anhydrous EMPROVE® EXPERT USP
- Product Code
- 1.37046
Regulatory Identifiers
- CAS Number
- 127-09-3 Check regulations →
- REACH No.
- 01-2119485123-42-XXXX
Identified Uses
Pharmaceutical production, Cosmetic raw material
Manufacturers & Suppliers
Merck Life Science UK Limited
national supplier
New Road, The Old Brickyard, GILLINGHAM, Dorset, SP8 4XT, UNITED KINGDOM
+44 (0)1747 833-000
Emergency Contacts
CHEMTREC
+44 (0)870 8200418
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
No components need to be disclosed according to the applicable regulations.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Sodium Acetate EC: 204-823-8 | 127-09-3 | --- | No |
Notes
No components need to be disclosed according to the applicable regulations.
First Aid Measures
Emergency procedures for chemical exposure incidents
After inhalation: fresh air.
In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with water/ shower.
After eye contact: rinse out with plenty of water. Remove contact lenses.
After swallowing: make victim drink water (two glasses at most). Consult doctor if feeling unwell.
Immediate Medical Attention
Consult doctor if feeling unwell.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water, Foam, Carbon dioxide (CO2), Dry powder
For this substance/mixture no limitations of extinguishing agents are given.
Carbon oxides, Sodium oxides, Combustible. Development of hazardous combustion gases or vapours possible in the event of fire.
Suppress (knock down) gases/vapors/mists with a water spray jet.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate the danger area, observe emergency procedures, consult an expert.
Take up dry. Clean up affected area.
Related Products
Similar products with comparable safety profiles
Ethyl acetate suitable for use as excipient EMPROVE® exp Ph Eur,BP,NF
CAS: 141-78-6
Sodium acetate, anhydrous
CAS: 127-09-3
Acetic acid (glacial) 100% EMPROVE® EXPERT Ph Eur,BP,JP,USP
CAS: 64-19-7
Sodium acetate
CAS: 127-09-3
Sodium Acetate Anhydrous
---
Sodium hydroxide solution 32% EMPROVE® EXPERT
---
Sodium chloride suitable for use as excipient EMPROVE® exp Ph Eur,BP,USP
---
Sodium acetate trihydrate for analysis EMSURE® ACS,ISO,Reag. Ph Eur
CAS: 6131-90-4
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
For precautions see section 2.2.
Tightly closed. Dry. Recommended storage temperature see product label.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Full contact: Material: Nitrile rubber, Minimum layer thickness: 0.11 mm, Break through time: 480 min, Material tested: KCL 741 Dermatril® L. Splash contact: Material: Nitrile rubber, Minimum layer thickness: 0.11 mm, Break through time: 480 min, Material tested: KCL 741 Dermatril® L. Compliance: EN374.
Safety glasses, tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Required when dusts are generated. Recommended Filter type: Filter type P1. Standards: DIN EN 143, DIN 14387.
Do not let product enter drains.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable under standard ambient conditions (room temperature).
The following applies in general to flammable organic substances and mixtures: in correspondingly fine distribution, when whirled up a dust explosion potential may generally be assumed.
Risk of explosion with: nitrates. Exothermic reaction with: Fluorine
no information available
No data available
In the event of fire: see section 5
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Waste material must be disposed of in accordance with the national and local regulations. Leave chemicals in original containers. No mixing with other waste.
Leave chemicals in original containers. No mixing with other waste.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- Shipping Name
- Not dangerous goods
Regulatory Information
Chemical regulations, safety assessments, and compliance status
This material safety data sheet complies with the requirements of Regulation (EC) No. 1907/2006.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Sodium acetate anhydrous EMPROVE® EXPERT USP?
The signal word is no signal word.
What is the physical form of Sodium acetate anhydrous EMPROVE® EXPERT USP?
Sodium acetate anhydrous EMPROVE® EXPERT USP is a powder appearing as form: powder color: colorless with colorless color. It has no data available odor.
What is Sodium acetate anhydrous EMPROVE® EXPERT USP used for?
Pharmaceutical production, Cosmetic raw material
What is the melting point of Sodium acetate anhydrous EMPROVE® EXPERT USP?
The melting point is No data available and the boiling point is No data available.