Acetic acid (glacial) 100% EMPROVE® EXPERT Ph Eur,BP,JP,USP

fresh air. Call in physician.

Symptoms: Cough, Shortness of breath, Pneumonia

Take off immediately all contaminated clothing. Rinse skin with water/ shower. Call a physician immediately.

Symptoms: Irritation and corrosion

rinse out with plenty of water. Immediately call in ophthalmologist. Remove contact lenses.

Symptoms: Risk of corneal clouding. Risk of blindness!

make victim drink water (two glasses at most), avoid vomiting (risk of perforation). Call a physician immediately. Do not attempt to neutralise.

Symptoms: Irritation and corrosion, Nausea, Vomiting, bronchitis, gastric spasms, Shortness of breath, shock, Circulatory collapse, Pneumonia

Water, Foam, Carbon dioxide (CO2), Dry powder

For this substance/mixture no limitations of extinguishing agents are given.

Combustible. Vapours are heavier than air and may spread along floors. Forms explosive mixtures with air at elevated temperatures. Development of hazardous combustion gases or vapours possible in the event of fire.

Remove container from danger zone and cool with water.

Do not breathe vapours, aerosols. Avoid substance contact. Ensure adequate ventilation. Keep away from heat and sources of ignition. Evacuate the danger area, observe emergency procedures, consult an expert.

Do not let product enter drains. Risk of explosion.

Take up with liquid-absorbent and neutralising material. Dispose of properly. Clean up affected area.

Materials: liquid-absorbent and neutralising material (e.g. Chemizorb® H⁺, Merck Art. No. 101595)

Observe label precautions.

Keep container tightly closed in a dry and well-ventilated place. Keep away from heat and sources of ignition. Recommended storage temperature see product label.

Immediately change contaminated clothing. Apply preventive skin protection. Wash hands and face after working with substance.

Keep away from open flames, hot surfaces and sources of ignition.

Technical measures and appropriate working operations should be given priority over the use of personal protective equipment. See section 7.1.

full contact: Glove material: butyl-rubber Glove thickness: 0,7 mm Break through time: 480 min splash contact: Glove material: natural latex Glove thickness: 0,6 mm Break through time: 30 min The protective gloves to be used must comply with the specifications of EC Directive 89/686/EEC and the related standard EN374, for example KCL 898 Butoject (full contact), KCL 706 Lapren (splash contact). The breakthrough times stated above were determined by KCL in laboratory tests acc. to EN374 with samples of the recommended glove types. This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).

Tightly fitting safety goggles

required when vapours/aerosols are generated. Recommended Filter type: filter E-(P2) The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.

Flame retardant antistatic protective clothing.

Do not let product enter drains. Risk of explosion.