Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Techlon-based maintenance grease
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Clear high-performance lubricating grease.
Manufacturers & Suppliers
Technolit GmbH
manufacturer
Industriestr. 8, 36137 Grossenlüder, Germany
Emergency Contacts
Technolit GmbH
+49 (0)6648 69-0
Berlin poison emergency telephone number
+49 (0)30 19240
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
preparation based on synthetic and natural hydrocarbons and additives. Propellant: propane / butane
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| propane / butane | --- | 40 - 50% | Yes |
| aliphatic hydrocarbons EC: 265-151-9 | 64742-49-0 | 25 - 30% | Yes |
Notes
For the wording of the listed risk phrases, please refer to section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of symptoms.
Wash with plenty of water and soap; apply skin cream.
Rinse opened eye for several minutes under running water. Then consult doctor.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide, extinguishing powder, water spry jet (where possible).
Do not attempt to extinguish leaked out, burning material with a full water jet.
In case of fire, remove intact cans from the danger zone. If necessary, cool with water to avoid risk of bursting!
Firefighter Protection
In case of fire, use self-contained respiratory equipment and full protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Remove leaking cans and dispose them as specified in section 13 (Disposal considerations). Do not allow product to enter sewers, surface or ground water.
Remove leaking cans and dispose them as specified in section 13 (Disposal considerations).
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not smoke, eat or drink while using this product. Do not spray in eyes. Use only in well ventilated areas.
Protect against sunlight. Do not keep inside cars or vans.
Do not smoke, eat or drink while using this product.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Not specified, see section 7.
Solvent-resistant protective gloves (e.g. made from nitrile rubber) The glove material must be impermeable and resistant to the substance/preparation. Due to lack of tests, no recommendation can be given for the most appropriate glove material for the product / preparation / mixture of chemicals. The breakthrough time, permeation rate and degradation must be considered when selecting the glove material. Glove material: The selection of appropriate gloves not only depends on the glove material, but also on other quality characteristics, which may vary between manufacturers. Since the product is a preparation consisting of several substances, the resistance of glove materials is not predictable and should be tested before use. Breakthrough time of the glove material: Contact the glove manufacturer for precise information on the glove breakthrough time. Gloves must be discarded after the breakthrough time has elapsed.
Do not spray in eyes. Use safety goggles, if necessary.
In case of inadequate ventilation, respiratory protection should be worn, if necessary.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable if used and stored according to specifications.
Cans may burst in case of temperatures above 50°C.
Temperatures above 50°C.
---
None if used and stored according to specifications.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Residual material must not be disposed with ordinary household waste.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- aerosol, contains propane / butane
- Transport Class
- 2
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
EU labelling: F+ (Extremely flammable), N (Dangerous for the environment), Xi (Irritant). Risk phrases: R 12, R 38, R 51/53, R 67. Safety phrases: S 23, S 29, S 51.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Techlon-based maintenance grease?
The signal word is na: r-phrases.
What is the physical form of Techlon-based maintenance grease?
Techlon-based maintenance grease is a aerosol appearing as yellowish with yellowish color. It has solvent odor.
What is Techlon-based maintenance grease used for?
Clear high-performance lubricating grease.
What is the melting point of Techlon-based maintenance grease?
The melting point is --- °C and the boiling point is --- °C.