Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ULTRACRETE PY4-PY5 RESIN
- Product Form
- Mixture
- Product Code
- PY4-5 RESIN
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- WDS0-M0P6-T00V-82W8
Identified Uses
Industrial use,Professional use,Consumer use
Manufacturers & Suppliers
Instarmac PLC
undefined
Unit W3A, Danny Morson Way, Birch Coppice Business Park, B78 1SE Dordon Tamworth, Warwickshire, England
+44 (0)1827 254400
http://www.instarmac.co.uk
Emergency Contacts
Emergency Contact
+44 (0)7971 217 347
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS08
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| styrene EC: 202-851-5 | 100-42-5 | 60% | Yes |
| phthalic anhydride EC: 201-607-5 | 85-44-9 | 4% | Yes |
| 2,2'-iminodiethanol; diethanolamine EC: 203-868-0 | 111-42-2 | 4% | Yes |
| 1,4-NAPHTHPQUINONE EC: 204-977-6 | 130-15-4 | 4% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air and keep comfortable for breathing. Call a poison center or a doctor if you feel unwell.
Symptoms: May cause respiratory irritation.
Rinse skin with water/shower. Take off immediately all contaminated clothing. If skin irritation occurs: Get medical advice/attention.
Symptoms: Irritation.
Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
Symptoms: Eye irritation.
Call a poison center or a doctor if you feel unwell.
Symptoms: Ingestion may cause nausea and vomiting. May be harmful if swallowed.
Immediate Medical Attention
Get medical advice/attention if exposed or concerned, or if irritation persists/occurs, or if feeling unwell. Treat symptomatically.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray. Dry powder. Foam. Carbon dioxide.
Flammable liquid and vapour.
Firefighter Protection
Do not attempt to take action without suitable protective equipment. Self-contained breathing apparatus. Complete protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid breathing (dust, vapor, mist, gas). Avoid contact with skin and eyes. Avoid spills. Do not walk on or roll equipment over spills. Stop leak if safe to do so. Ventilate spillage area. No open flames, no sparks, and no smoking. Do not breathe dust/fume/gas/mist/vapours/spray.
Avoid release to the environment.
Take up liquid spill into absorbent material.
Materials: absorbent material
Related Substances
Similar chemicals with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Always wash hands after handling the product. Avoid spills. Do not walk on or roll equipment over spills. Do not eat, drink or smoke when using this product. Take off immediately all contaminated clothing and wash it before reuse. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Ground/bond container and receiving equipment. Use only non-sparking tools. Take precautionary measures against static discharge. Flammable vapours may accumulate in the container. Use explosion-proof equipment. Wear personal protective equipment. Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Do not breathe dust/fume/gas/mist/vapours/spray. Use only outdoors or in a well-ventilated area. Avoid contact with skin and eyes.
Store in a well-ventilated place. Keep cool. Keep container tightly closed. Store locked up.
Wash contaminated clothing before reuse. Do not eat, drink or smoke when using this product. Always wash hands after handling the product.
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Ground/bond container and receiving equipment. Use only non-sparking tools. Take precautionary measures against static discharge.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure good ventilation of the work station.
Protective gloves. Material: Nitrile rubber (NBR), Neoprene rubber (HNBR), Viton® II, Polyvinylalcohol (PVA).
Chemical goggles or face shield. Do not wear contact lenses. Safety glasses
Full face mask with filter type A. [In case of inadequate ventilation] wear respiratory protection. Standard: EN 14387
Wear suitable protective clothing
Avoid release to the environment.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Flammable liquid and vapour.
No dangerous reactions known under normal conditions of use.
Avoid contact with hot surfaces. Heat. No flames, no sparks. Eliminate all sources of ignition.
No additional information available
Under normal conditions of storage and use, hazardous decomposition products should not be produced.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of contents/container in accordance with licensed collector’s sorting instructions.
Dispose of contents/container in accordance with licensed collector’s sorting instructions.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN 1866
- Shipping Name
- RESIN SOLUTION
- Transport Class
- 3
- Packing Group
- III
Special provisions for carriage - Packages (ADR): V12; Special provisions for carriage - Operation (ADR): S2
Special provisions (IMDG): 223, 955; Properties and observations (IMDG): Miscibility with water depends upon the composition.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ULTRACRETE PY4-PY5 RESIN?
The signal word is danger.
What is the physical form of ULTRACRETE PY4-PY5 RESIN?
ULTRACRETE PY4-PY5 RESIN is a liquid with light brown. color. It has characteristic odour. styrene. odor.
What is the solubility of ULTRACRETE PY4-PY5 RESIN?
Insoluble in water.
What is ULTRACRETE PY4-PY5 RESIN used for?
Industrial use,Professional use,Consumer use
What are the hazard statements for ULTRACRETE PY4-PY5 RESIN?
This substance has 7 hazard statements:
- H226: Flammable liquid and vapour.
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H335: May cause respiratory irritation.
- H361: Suspected of damaging the unborn child.
- H372: Causes damage to organs through prolonged or repeated exposure.
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of ULTRACRETE PY4-PY5 RESIN?
The melting point is Not applicable and the boiling point is 145 °C.