Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- WEVO – CASTING RESIN PU 403
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Polyol components for the production of polyurethanes
Manufacturers & Suppliers
WEVO -CHEMIE GmbH
manufacturer
Schönbergstrasse 14, D - 73760 Ostfeldern - Kemnat
+49 (0) 711 - 16761 - 0
Emergency Contacts
Vergiftungs-Informations-Zentrale Freiburg
+49 761 – 19240
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Polyetherpolyole preparation with mineral filler
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Bisphenol A - (epichlorhydrin) ; epoxy resin (number average molecular weight < 700) EC: 500-033-5 | 25068-38-6 | 15% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Let in fresh air. Unconsciousness: lateral position
After contact with skin, wash immediately with plenty of water and soap.
Remove contact lenses, keep eyelids open. Flush with plenty of water (10 - 15 min.).
Immediate Medical Attention
Call a physician. If symptoms persist, consult a doctor. To be sure call for a doctor. Call a physician.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
WEVO – HARDENER 300
---
WEVOPUR 403 FL
---
ULTRACRETE PY4-PY5 RESIN
UFI: WDS0-M0P6-T00V-82W8
VEOVA™ Vinyl Ester Monomer 10
CAS: 51000-52-3
D.E.R.* 331 EPOXY RESIN
---
Polyurethane Resin UR5638, Part B
---
2-K WB RENNERPLAST FOR PVC, BY SPRAY, TAUPE 5395
---
EBECRYL® 416 RADIATION CURING RESINS
UFI: MN23-Y0G7-E00N-Q7CH
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use protective gloves. Wear nitril gloves (minumum 0,4 mm thickness penetration time >= 480 min). Please see also recommendation on www.gisbau.de. The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application.
Use tightly fitting safety glasses.
Breathing protection equipment required in inadequately ventilated places and during spraying. Face mask A/P2.
Wear long-sleeved industrial protective clothing. Keep working clothes separate. Take off immediately all contaminated clothing. Decontaminate, destroy and dispose of soiled protective clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for WEVO – CASTING RESIN PU 403?
The signal word is na: r-phrases.
What is the physical form of WEVO – CASTING RESIN PU 403?
WEVO – CASTING RESIN PU 403 is a liquid with black, nature, white color. It has nearly odourless odor.
What is WEVO – CASTING RESIN PU 403 used for?
Polyol components for the production of polyurethanes