Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Pipe and Fittings
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
FOR INDUSTRIAL USE ONLY
Manufacturers & Suppliers
Ameron B.V. Fiberglass-Composite Pipe Group/Europe
manufacturer
J.F.Kennedylaan 7 P.O. Box 6, 4190 CA, Geldermalsen, The Netherlands
+31 345 587587
Emergency Contacts
Ameron B.V. Fiberglass-Composite Pipe Group/Europe
+31 345 587587
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
GHS07
Hazard Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Substances presenting a health or environmental hazard within the meaning of the Dangerous Substances Directive 67/548/EEC.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| glass, oxide, chemicals | 65997-17-3 | 20 - 80% | No |
| Cured resin | --- | 20 - 80% | No |
See section 16 for the full text of the R Phrases declared above. Occupational Exposure Limit(s), if available, are listed in Section 8
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air. Keep person warm and at rest. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel. Give nothing by mouth. If unconscious place in recovery position and seek medical advice.
Remove contaminated clothing and shoes. Wash skin thoroughly with soap and water or use recognised skin cleanser.
Check for and remove any contact lenses. Immediately flush eyes with running water for at least 15 minutes, keeping eyelids open.
If swallowed, seek medical advice immediately and show the container or label. Keep person warm and at rest. Do not induce vomiting.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
alcohol resistant foam, CO₂ blanket, water spray/mist
Fire will produce dense black smoke. Exposure to decomposition products may cause a health hazard.
Cool closed containers exposed to fire with water.
Firefighter Protection
Appropriate breathing apparatus may be required.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid breathing dust. Refer to protective measures listed in sections 7 and 8.
Related Products
Similar products with comparable safety profiles
PIPES
CAS: 5625-37-6
LUBRICANT FOR PIPE THREADING AND METAL FORMING
---
LOCTITE 561 known as Sticks Assortment PIPE THREAD
---
LOCTITE 5117 THREAD SEALANT known as LOCTITE® PIPE JOINT COMPOUND 1
---
Oatey 95/5 Lead Free Plumbing Solder
---
Spears® PVC-25 Wet-N-Dry Low VOC PVC Plastic Pipe Cement
---
Silpat Fitterskit (expired)
---
LOCTITE PC 7210 B known as Loctite 7210 (PipeR.) KitComp B
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wear suitable gloves.
Store away from direct sunlight.
Store and use away from heat, sparks, open flame, or any other ignition source.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
When polishing treated surfaces, a mask with dust filter must be worn. When machine grinding, eye protection must be worn. Work gloves must always be worn. None required; however, use of adequate ventilation is good industrial practice.
Wear suitable gloves.
Safety eye-wear should be used when there is a likelihood of exposure. Safety glasses with side shields.
Use appropriate respiratory protection if there is the potential to exceed the exposure limit(s). Approved/certified disposable particulate dust mask.
Peronnel should wear protective clothing. Wear overalls or long-sleeved shirt and long trousers.
Do not allow to enter drains or watercourses.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of according to all federal, state and local applicable regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The product is labelled as follows, in accordance with local regulations. This product is not classified according to the EU regulations.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Pipe and Fittings?
The signal word is warning.
What is the physical form of Pipe and Fittings?
Pipe and Fittings is a solid. .
What is Pipe and Fittings used for?
FOR INDUSTRIAL USE ONLY
What are the hazard statements for Pipe and Fittings?
This substance has 1 hazard statement:
- H335: May be irritating to eyes, skin and respiratory system.