Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Loctite(R) 243 Threadlocker Medium Strength
- Product Form
- Anaerobic Sealant
- Product Code
- 24078
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Henkel Corporation
manufacturer
1001 Trout Brook Crossing, Rocky Hill, Connecticut 06067
http://www.loctite.com
Emergency Contacts
Henkel Corporation
860.571.5100
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Polyglycol dimethacrylate | 25852-47-5 | 60 - 100% | Yes |
| Polyglycol dioctanoate | 18268-70-7 | 10 - 30% | Yes |
| Amorphous fumed silica | 68611-44-9 | 1 - 5% | Yes |
| Saccharin | 81-07-2 | 1 - 5% | Yes |
| 1-Acetyl-2-phenylhydrazine | 114-83-0 | 0.1 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air. If symptoms develop and persist, get medical attention.
Wash with soap and water. Remove contaminated clothing and shoes. Wash clothing before reuse. Get medical attention if symptoms occur.
Flush with copious amounts of water, preferably, lukewarm water for at least 15 minutes, holding eyelids open all the time. Get medical attention.
Do not induce vomiting. Keep individual calm. Obtain medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
dry powder, foam or carbon dioxide
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Prevent product from entering drains or open waters.
Soak up with inert absorbent. Store in a partly filled, closed container until disposal.
Materials: inert absorbent
Related Products
Similar products with comparable safety profiles
LOCTITE 243 MEDIUM STRENGTH THREADLOCKER known as Loctite 243 10ML AU
---
Loctite 243
---
LOCTITE® 243™ THREADLOCKER
---
LOCTITE 243 THREADLOCKER 50ML
---
LOCTITE® 271™ THREADLOCKER HIGH STRENGTH
---
LOCTITE 243
---
LOCTITE 2432
---
LOCTITE® 271™ THREADLOCKER HIGH STRENGTH PART NO. 27131
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Avoid breathing vapor and mist. Wash thoroughly after handling.
For safe storage, store at or below 38°C (100°F). Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use.
Keep in a cool, well ventilated area away from heat, sparks and open flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No specific ventilation requirements noted, but forced ventilation may still be required if concentrations exceed occupational exposure limits.
Neoprene gloves. Butyl rubber gloves. Natural rubber gloves.
Safety goggles or safety glasses with side shields.
Use NIOSH approved respirator if there is potential to exceed exposure limit(s).
Use impermeable gloves and protective clothing as necessary to prevent skin contact.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable.
Will not occur.
See "Handling and Storage" (Section 7) and "Incompatibility" (Section 10).
Strong oxidizers. Reducing agents. Strong alkalis. Oxygen scavengers. Oxidizing agents. Other polymerization initiators.
Oxides of carbon. Oxides of sulfur. Oxides of nitrogen. Irritating organic vapors.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of according to Federal, State and local governmental regulations.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- Shipping Name
- Unrestricted
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Loctite(R) 243 Threadlocker Medium Strength?
The signal word is warning.
What is the physical form of Loctite(R) 243 Threadlocker Medium Strength?
Loctite(R) 243 Threadlocker Medium Strength is a liquid with blue color. It has characteristic odor.
What are the hazard statements for Loctite(R) 243 Threadlocker Medium Strength?
This substance has 2 hazard statements:
- H317: MAY CAUSE ALLERGIC SKIN REACTION.
- H335: MAY CAUSE EYE, SKIN AND RESPIRATORY TRACT IRRITATION.
What is the melting point of Loctite(R) 243 Threadlocker Medium Strength?
The melting point is Not available and the boiling point is Greater than 149°C (300°F).