Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE 243 MEDIUM STRENGTH THREADLOCKER
- Synonyms
- Loctite 243 10ML AU
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Threadlocker
Manufacturers & Suppliers
Henkel Australia Pty Ltd
manufacturer
135-141 Canterbury Road, Kilsyth, Victoria, 3137, Australia
+61 (3) 9724 6444
Emergency Contacts
Emergency Contact
1800 032 379
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Methacrylate resin based threadlocker
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If symptoms persist, seek medical advice.
Rinse with running water and soap. Seek medical advice.
Rinse immediately with plenty of running water (for 10 minutes). Seek medical attention if necessary.
Rinse mouth, do not induce vomiting, consult a doctor.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
If product is involved in fire extinguish with dry powder, foam or carbon dioxide.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
For small spills wipe up with paper towel and place in container for disposal.
For large spills absorb onto inert absorbent material and place in sealed container for disposal.
Do not let product enter drains.
For small spills wipe up with paper towel and place in container for disposal. For large spills absorb onto inert absorbent material and place in sealed container for disposal.
Materials: paper towel, inert absorbent material
Related Products
Similar products with comparable safety profiles
LOCTITE® 243™ THREADLOCKER
---
LOCTITE 243 THREADLOCKER 50ML
---
LOCTITE 243 MEDIUM STRENGTH THREADLOCKER known as Loctite 243 10ML AU
---
LOCTITE® 271™ THREADLOCKER HIGH STRENGTH
---
LOCTITE® LOW STRENGTH THREAD LOCKER 222™
---
LOCTITE 262 THREADLOCKER BO250G
---
LOCTITE 2432
---
LOCTITE® 271™ THREADLOCKER HIGH STRENGTH PART NO. 27131
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use only in well-ventilated areas. Avoid skin and eye contact.
Store in original containers at 8-21°C (46.4-69.8°F) and do not return residual materials to containers as contamination may reduce the shelf life of the bulk product. Store in a cool, well-ventilated place. Do not expose to direct heat. Store in sealed original container.
Do not expose to direct heat.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Will not occur.
Keep away from heat, spark and flame.
Strong acids and oxidizing agents. Oxygen scavengers. Strong alkalis. Reducing agents. Other polymerization initiators.
In case of fire toxic gases can be released. Irritating vapors. Oxides of carbon.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (Fatty acid amide)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is LOCTITE 243 MEDIUM STRENGTH THREADLOCKER known by?
LOCTITE 243 MEDIUM STRENGTH THREADLOCKER is also known as: Loctite 243 10ML AU
What is the hazard signal word for LOCTITE 243 MEDIUM STRENGTH THREADLOCKER?
The signal word is warning.
What is the physical form of LOCTITE 243 MEDIUM STRENGTH THREADLOCKER?
LOCTITE 243 MEDIUM STRENGTH THREADLOCKER is a liquid appearing as blue with blue color. It has characteristic odor.
What is LOCTITE 243 MEDIUM STRENGTH THREADLOCKER used for?
Threadlocker
What are the hazard statements for LOCTITE 243 MEDIUM STRENGTH THREADLOCKER?
This substance has 3 hazard statements:
- H317: May cause an allergic skin reaction.
- H319: Causes serious eye irritation.
- H411: Toxic to aquatic life with long lasting effects.