ARALDITE 2018 RESIN(E)/HARZ Safety Data Sheet

01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name: ARALDITE 2018 RESIN(E)/HARZ

Regulatory Identifiers

CAS Number: N/A

Identified Uses

Resin for adhesive systems

Manufacturers & Suppliers

H

Huntsman Advanced Materials (Europe)BVBA

manufacturer

Everslaan 45, 3078 Everberg / Belgium

+41619661599

Emergency Contacts

Emergency Contact

+41 61 966 40 00

ORFILA

+33(0)145425959

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Skin Sens.

GHS Pictograms

Hazard Statements

May cause sensitization by skin contact.

03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Chemical Name	CAS Number	Concentration	Hazardous
hexamethylene-diisocyanate, homopolymere	28182-81-2	90 - 98%	Yes
hexamethylene-di-isocyanate EC: 212-485-8	822-06-0	0.15%	Yes

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move to fresh air. If symptoms persist, call a physician.

Skin contact

Wash off with soap and plenty of water. If skin irritation persists, call a physician.

Eye contact

Rinse immediately with plenty of water for at least 15 minutes. If eye irritation persists, consult a specialist.

Ingestion

Immediately give plenty of water (if possible charcoal slurry). Do not induce vomiting. Obtain medical attention.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray. Carbon dioxide (CO2). Foam. Dry powder.

Unsuitable media

High volume water jet.

Specific hazards

Burning produces obnoxious and toxic fumes.

Firefighter Protection

Wear self-contained breathing apparatus and protective suit.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Do not breathe vapours/dust. Avoid contact with skin, eyes and clothing.

Environmental

Do not allow material to contaminate ground water system.

Cleanup methods

Soak up with inert absorbent material

Materials: sand, silica gel, acid binder, universal binder, sawdust

—

Related Products

Similar products with comparable safety profiles

A

ARALDITE® 2014-2 RESIN

---

A

ARALDITE® 2011 RESIN

---

A

ARALDITE 2018 HARDENER/HAERTER/DURCISSEUR

---

A

ARALDITE® MY 0510

CAS: 5026-74-4

A

ARALDITE® PY 306 CH

CAS: 9003-36-5

A

ARALDITE® PY 306 CH

CAS: 9003-36-5

A

ARALDITE® MY 721 CH

CAS: 28768-32-3

A

ARALDITE® GY 250 CH

CAS: 1675-54-3

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Handle and open container with care.

Storage

Keep container tightly closed.

Hygiene

Keep away from food, drink and animal feeding stuffs.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

rubber or plastic gloves

Eyes

Tightly fitting safety goggles.

Respiratory

In the case of hazardous fumes, wear self contained breathing apparatus.

Skin/Body

long sleeved clothing

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State

paste

Physical State Data

liquid

State Under Standard Conditions

---

Appearance

---

Colour

opaque

Colour Intensity

---

Form

paste

Odor

slight

Odor Threshold

---

Ph

---

Melting Point

approx.-24 °C

Boiling Point

---

Flash Point

158 °C

Freezing Point

---

Softening Point

---

Solidification Point

---

Cloud Point

---

Crystallisation Point

---

Relative Evaporation Rate

---

Evaporation Rate

---

Vapor Pressure

< 0.00001 kPa at 20 °C

Vapor Density

---

Relative Density

---

Bulk Density

---

Density

1.16 g/cm3

Flammability

---

Upper Explosive Limit

---

Lower Explosive Limit

---

Explosive Limits

---

Auto Ignition Temperature

460 °C

Decomposition Temperature

---

Solubility

---

Partition Coefficient

---

Solubility In Water

Decomposes in contact with water.

Solubility In Fat

---

Molecular Weight

---

Voc Content

---

Metal Corrosion

---

Dynamic Viscosity

12 - 18 Pa.s at 25 °C

Kinematic Viscosity

---

Properties Status

---

10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Avoid

Note: Take necessary action to avoid static electricity discharge.

Incompatible

Strong acids and strong bases. Strong oxidizing agents.

Decomposition

Carbon oxides. Nitrogen oxides. Burning produces obnoxious and toxic fumes.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Disposal

Must be incinerated, when in compliance with local regulations.

Waste Codes

070204 Waste Key Number

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Labelling required according to EEC Directive. Contains isocyanates. Hazardous components which must be listed on the label: hexamethylene-diisocyanate, homopolymers.

Chemical Safety Assessment Not performed

R-phrase(s): R43 May cause sensitization by skin contact. S-phrase(s): S28 After contact with skin, wash immediately with plenty of water. S37/39 Wear suitable gloves and eye/face protection.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for ARALDITE 2018 RESIN(E)/HARZ?

The signal word is no signal word.

What is the physical form of ARALDITE 2018 RESIN(E)/HARZ?

ARALDITE 2018 RESIN(E)/HARZ is a paste with opaque color. It has slight odor.

What is ARALDITE 2018 RESIN(E)/HARZ used for?