Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Lascaux Acrylic Adhesive 303 HV
- Product Code
- 4001
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Adhesives for the preservation and restoration of art and cultural assets
Manufacturers & Suppliers
Lascaux Colours & Restauro Barbara Diethelm AG
manufacturer
Zürichstrasse 42, 8306 Brüttisellen
+41 44 807 41 41
Emergency Contacts
Tox Info Suisse
145
24-h
Tox Info Suisse
+41 44 251 51 51
24-h
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| FATTY ALCOHOL ETHER SULPHATE | 219756-63-5 | 1 - 3% | Yes |
| A MIXTURE OF: 5-CHLORO-2-METHYL-2H-ISOTHIAZOL-3-ONE AND 2-METHYL-2H-ISOTHIAZOL-3-ONE (3:1) | 55965-84-9 | 0.00015 - 0.0015% | Yes |
Full text of H- and EUH-phrases: see section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Take the casualty into the fresh air and keep warm. Keep at rest. Irregular breathing/no breathing: artificial respiration. Unconsciousness: lateral position - call a physician.
Wash away with soap and water and rinse. Do NOT use solvents or thinners.
Remove contact lenses, keep eyelids open. Flush with plenty of water (10 - 15 min.). Call a physician.
Contact a doctor immediately. Keep at rest. Do not induce vomiting.
Immediate Medical Attention
In all cases of doubt, or when symptoms persist, seek medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Alcohol resistant foam, CO2, powders, water spray.
Waterjet.
Fire will produce dense black smoke. Exposure to decomposition products may cause a health hazard.
Firefighter Protection
Appropriate breathing apparatus may be required.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Keep away from ignition sources and provide for good ventilation. Refer to protective measures listed in sections 7 and 8.
Do not allow to enter into surface water or drains. If the product contaminates lakes, rivers or sewages, inform appropriate authorities in accordance with local regulations.
Clean preferably with a detergent; avoid use of solvents.
Related Products
Similar products with comparable safety profiles
Lascaux Transparent Varnish 1, 2, 3 (2060, 2061, 2064)
---
Lascaux Medium 2 matt
---
Easy-Mix RK-7100 Structural Acrylic Adhesive Resin
---
Lascaux Aquatint Spray Resist
---
Lascaux Soft Resist
---
Easy-Mix RK-7100 Structural Acrylic Adhesive Hardener
UFI: D960-4051-500A-4CHE
Lascaux Hard Resist
---
RAL Acrylic Spray
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not eat or drink during work - no smoking. Comply with the health and safety at work laws. For personal protection see Section 8.
Keep containers dry and cool. Avoid heating and direct sunlight.
Do not eat or drink during work - no smoking.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Wear protective glasses in case of splashes.
If workplace limits are exceeded, a gas mask approved for this purpose must be worn.
Body protection After skin contact wash thorougly with soap and water or use recognised skin cleanser. Do Not use solvents or thinners.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No information available.
No information available.
No information available.
Stable under recommended storage and handling conditions(See section 7).
No information available.
When exposed to high temperatures may produce hazardous decomposition products such as carbon monoxide and dioxide, smoke, oxides of nitrogen.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Lascaux Acrylic Adhesive 303 HV?
The signal word is warning.
What is the physical form of Lascaux Acrylic Adhesive 303 HV?
Lascaux Acrylic Adhesive 303 HV is a pasty to liquid. appearing as pasty to liquid. with white. color. It has poor, characteristic. odor.
What is Lascaux Acrylic Adhesive 303 HV used for?
Adhesives for the preservation and restoration of art and cultural assets
What are the hazard statements for Lascaux Acrylic Adhesive 303 HV?
This substance has 1 hazard statement:
- H319: Causes serious eye irritation.