Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- A1 LP01 Powder
- Product Form
- Powder
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
A1 Liquid/Powder system
Manufacturers & Suppliers
A.C.T
Nijverheidsweg 15 A, 3251 LP Stellendam, The Netherlands
++31-187-663006
Emergency Contacts
Emergency Contact
+31 (0) 187 663006
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Calcium Sulphate EC: 231-900-3 | 7778-18-9 | 100% | No |
Notes
(1) Information on ingredients: (1) Substance for which maximum workplace exposure limits are available.
First Aid Measures
Emergency procedures for chemical exposure incidents
Take the person out into the open air.
Watch out for any remaining product between skin and clothing, shoes, jewellery, etc.
Wash eyes thoroughly with fresh, clean water for 15 minutes holding the eyelids open.
Immediate Medical Attention
If troubles remain after inhalation, seek medical advice. If there is any redness, pain or visual impairment after eye contact, consult an ophthalmologist. In the event of swallowing, seek medical attention, showing the label.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Non combustible
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Consult the safety measures listed under heading 7 and 8.
Prevent any material from entering drains or waterways.
Retrieve the product by mechanical means (sweeping, vacuuming)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Always wash hands after handling. Observe precautions stated on label and also industrial safety regulations.
Store dry
Always wash hands after handling. No smoking, eating or drinking in areas where the mixture is used.
Prevent access by unauthorised personnel.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure that there is adequate ventilation, especially in confined areas.
Wear suitable protective gloves in the event of prolonged or repeated skin contact.
Avoid contact with eyes. Before handling powders or dust emission, wear mask goggles in accordance with standard EN166.
Avoid breathing dust. Type of FFP mask. Wear a disposable half-mask dust filter in accordance with standard EN149.
Work clothing worn by personnel shall be laundered regularly. After contact with the product, all parts of the body that have been soiled must be washed.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
This mixture is stable under the recommended handling and storage conditions in section 7.
No data available.
No data available.
Avoid formation of dusts
None.
The thermal decomposition may release/form :
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
No aquatic toxicity data available for the mixture. Calcium sulphate shows low toxicity (LC50/EC50 > 79 mg/l) across fish, daphnia, and algae.
12.2. Persistence and degradability
The product hydrolyses quickly in the presence of water to Calcium and Sulphate ions. It is an inorganic product that is not eliminable through biological cleaning processes. No degradability data is available for Calcium Sulphate.
12.3. Bio-accumulative potential
Based on the n-octanol/water partition coefficient significant accumulation in organisms is not expected. No indication to bioaccumulation potential.
12.4. Mobility in soil
The product is a water-soluble solid that is mobile in soil and may contaminate groundwater.
12.5. Results of PBT and vPvB assessment
The substance does not meet the criteria for PBT or vPvB classification.
12.6. Other adverse effects
The substance/product is not classified as dangerous for the environment according to European criteria.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Do not pour into drains or waterways.
Recycle or dispose of waste in compliance with current legislation, preferably via a certified collector or company.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Classification and labelling information included in section 2
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for A1 LP01 Powder?
The signal word is no signal word.
What is the physical form of A1 LP01 Powder?
A1 LP01 Powder is a powder or dust .
What is A1 LP01 Powder used for?
A1 Liquid/Powder system
What is the melting point of A1 LP01 Powder?
The melting point is Not relevant and the boiling point is Not relevant.