Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Luwax® A Powder
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
wax for the chemical industry Chemical
Manufacturers & Suppliers
BASF Australia Limited
manufacturer
Level 23, 40 City Road, Southbank, Victoria 3006, AUSTRALIA
+61 3 8855-6600
Emergency Contacts
BASF Emergency Advice Number
1800 803 440
24h
BASF Emergency Advice Number
+61 3 8855 6666
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
polyethylene
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| polyethylene | 9002-88-4 | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Keep patient calm, remove to fresh air, seek medical attention.
Wash thoroughly with soap and water
Wash affected eyes for at least 15 minutes under running water with eyelids held open.
Rinse mouth and then drink 200-300 ml of water.
Immediate Medical Attention
seek medical attention
Medical Treatment
Treat according to symptoms (decontamination, vital functions)
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
dry powder, foam
carbon dioxide
harmful vapours. Generation of fumes/fog. The substances/groups of substances mentioned can be released in case of fire.
Firefighter Protection
Wear a self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
For small amounts: Pick up with suitable appliance and dispose of.
For large amounts: Contain with dust binding material and dispose of.
Prevent releases of this product into the environment. Comprehensive instructions explaining how to prevent releases of plastics pellets, flakes, and powders to the environment during both use and disposal are provided by the industry program 'Operation Clean Sweep' (OCS).
For small amounts: Pick up with suitable appliance and dispose of. For large amounts: Contain with dust binding material and dispose of. Avoid raising dust.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Breathing must be protected when large quantities are decanted without local exhaust ventilation.
Keep container tightly closed and dry; store in a cool place.
Take precautionary measures against static discharges.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable if stored and handled as prescribed/indicated.
No hazardous reactions if stored and handled as prescribed/indicated.
No hazardous reactions when stored and handled according to instructions.
Avoid dust formation. Avoid deposition of dust. Avoid all sources of ignition: heat, sparks, open flame. Avoid electro-static charge.
strong acids, strong bases, strong oxidizing agents
No hazardous decomposition products if stored and handled as prescribed/indicated.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
Ecotoxicity
There is a high probability that the product is not acutely harmful to aquatic organisms. At the present state of knowledge, no negative ecological effects are expected.
Mobility
The substance will not evaporate into the atmosphere from the water surface. Adsorption to solid soil phase is possible.
Persistence and degradability
Not readily biodegradable (by OECD criteria). The product is virtually insoluble in water and can thus be separated from water mechanically in suitable effluent treatment plants.
Bioaccumulation potential
Accumulation in organisms is not to be expected.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
incineration
Must be disposed of or incinerated in accordance with local regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Luwax® A Powder?
The signal word is no signal word.
What is the physical form of Luwax® A Powder?
Luwax® A Powder is a powder with white color. It has product specific odor.
What is Luwax® A Powder used for?
wax for the chemical industry Chemical
What is the melting point of Luwax® A Powder?
The melting point is 101 - 109 °C and the boiling point is not determined.