Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- SAS36 WHITE PRIMER 500ML
- Product Code
- 000103079541
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Paint.
Uses advised against
Use only for intended applications.
Manufacturers & Suppliers
VAN LINE LTD
undefined
1 HARKER WAY LEEDS WEST YORKSHIRE ENGLAND LS9 0DY
+44 (0) 113 213 4300
Emergency Contacts
Emergency Contact
0044 (0) 7970 779978
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS02
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Acetone EC: 200-662-2 | 67-64-1 | 10 - 30% | Yes |
| n-Butaan ( Nota K, < 0,1 % 1,3-butadieen (EG 203-450-8) EC: 203-448-7 | 106-97-8 | 10 - 30% | Yes |
| opaan EC: 200-827-9 | 74-98-6 | 10 - 30% | Yes |
| Isobutaan ( Nota K, < 0,1 % 1,3-butadieen (EG 203-450-8) EC: 200-857-2 | 75-28-5 | 10 - 30% | Yes |
| Xyleen (mengsel) EC: 215-535-7 | 1330-20-7 | 10 - 30% | Yes |
| N-butyl acetate EC: 204-658-1 | 123-86-4 | 5 - 10% | Yes |
| Titaanwit TiO2 EC: 236-675-5 | 13463-67-7 | 5 - 10% | Yes |
| 2-methoxy-1-methylethyl acetate EC: 203-603-9 | 108-65-6 | 1 - 5% | Yes |
| ethylbenzene EC: 202-849-4 | 100-41-4 | 1 - 5% | Yes |
| 1-Methoxy-2-Propanol EC: 203-539-1 | 107-98-2 | 1 - 5% | Yes |
| iso-Butanol EC: 201-148-0 | 78-83-1 | 1 - 5% | Yes |
| Zinc oxyde EC: 215-222-5 | 1314-13-2 | 0.1 - 1% | Yes |
| 2-ethylhexyl 10-ethyl-4,4-dimethyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate EC: 260-820-0 | 57583-35-4 | 0.1% | Yes |
| 2-butanonoxim, ethylmethylketoxim EC: 202-496-6 | 96-29-7 | 0.1% | Yes |
| Methyl ethyl ketone EC: 201-159-6 | 78-93-3 | 0.1% | Yes |
The Full Text for all R-Phrases and Hazard Statements are Displayed in Section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move affected person to fresh air and keep warm and at rest in a position comfortable for breathing. Loosen tight clothing such as collar, tie or belt. Get medical attention if symptoms are severe or persist. Place unconscious person on their side in the recovery position and ensure breathing can take place.
Symptoms: Spray/mists may cause respiratory tract irritation.
Remove contamination with soap and water or recognised skin cleansing agent.
Symptoms: Repeated exposure may cause skin dryness or cracking.
Remove any contact lenses and open eyelids wide apart. Rinse with water. Get medical attention if any discomfort continues.
Symptoms: Vapour or spray in the eyes may cause irritation and smarting. Particles in the eyes may cause irritation and smarting.
Rinse mouth thoroughly with water. If in doubt, get medical attention promptly. Due to the small packaging, the risk of ingestion is minimal. Do not induce vomiting unless under the direction of medical personnel.
Symptoms: Due to the physical nature of this product, it is unlikely that ingestion will occur.
Immediate Medical Attention
If in doubt, get medical attention promptly. Get medical attention if symptoms are severe or persist (inhalation) or if any discomfort continues (eye contact).
Medical Treatment
Treat symptomatically.
Related Substances
Similar chemicals with comparable safety profiles
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide adequate ventilation. Observe any occupational exposure limits for the product or ingredients.
To protect hands from chemicals, wear gloves that are proven to be impervious to the chemical and resist degradation. The most suitable glove should be chosen in consultation with the glove supplier/manufacturer, who can provide information about the breakthrough time of the glove material. Considering the data specified by the glove manufacturer, check during use that the gloves are retaining their protective properties and change them as soon as any deterioration is detected. Frequent changes are recommended.
Unless the assessment indicates a higher degree of protection is required, the following protection should be worn: Tight-fitting safety glasses. Personal protective equipment that provides appropriate eye and face protection should be worn.
Ensure all respiratory protective equipment is suitable for its intended use and is UKCAmarked. Check that the respirator fits tightly and the filter is changed regularly. Gas and combination filter cartridges suitable for intended use should be used. Full face mask respirators with replaceable filter cartridges suitable for intended use should be used. Half mask and quarter mask respirators with replaceable filter cartridges suitable for intended use should be used.
Wear appropriate clothing to prevent repeated or prolonged skin contact.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2.1
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for SAS36 WHITE PRIMER 500ML?
The signal word is danger.
What is the physical form of SAS36 WHITE PRIMER 500ML?
SAS36 WHITE PRIMER 500ML is a aerosol appearing as aerosol with white color. It has organic solvents odor.
What is SAS36 WHITE PRIMER 500ML used for?
Paint.
What are the hazard statements for SAS36 WHITE PRIMER 500ML?
This substance has 4 hazard statements:
- H222: Extremely flammable aerosol.
- H229: Pressurised container: may burst if heated.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.