Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- SAS470 SPRAY ADHESIVE 500ML
- Product Code
- 000103079563
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Adhesive.
Manufacturers & Suppliers
Van-Line Limited
national supplier
Nina Works, Gelderd Road, Leeds, LS12 6NA
+44 (0) 113 213 4300
Emergency Contacts
Hazchem line
0044 (0) 7970 779978
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Move the exposed person to fresh air at once. When breathing is difficult, properly trained personnel may assist affected person by administering oxygen. Keep the affected person warm and at rest. Get prompt medical attention.
Wash the skin immediately with soap and water. Get medical attention if any discomfort continues.
Make sure to remove any contact lenses from the eyes before rinsing. Promptly wash eyes with plenty of water while lifting the eye lids. Continue to rinse for at least 15 minutes. Get medical attention if any discomfort continues.
DO NOT INDUCE VOMITING! Rinse mouth thoroughly with water and give large amounts of milk or water to people not unconscious. Get medical attention if any discomfort continues.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Powder. Dry chemicals, sand, dolomite etc. Water spray, fog or mist.
Aerosol cans may explode in a fire.
Containers close to fire should be removed or cooled with water. Use water to keep fire exposed containers cool and disperse vapours.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Keep out of confined spaces because of explosion risk. If leakage cannot be stopped, evacuate area.
Let evaporate
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep away from heat, sparks and open flame. Avoid spilling, skin and eye contact. Ventilate well, avoid breathing vapours. Use approved respirator if air contamination is above accepted level.
Aerosol cans: Must not be exposed to direct sunlight or temperatures above 50°C.
Avoid spilling, skin and eye contact.
Keep away from heat, sparks and open flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide adequate general and local exhaust ventilation.
Use protective gloves.
Use approved safety goggles or face shield.
No specific recommendation made, but respiratory protection must be used if the general level exceeds the recommended occupational exposure limit. Use chemical cartridge protection with appropriate cartridge.
Wear appropriate clothing to prevent any possibility of liquid contact and repeated or prolonged vapour contact.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal temperature conditions.
Avoid heat, flames and other sources of ignition.
Strong oxidising agents. Strong alkalis. Strong mineral acids.
Fire creates: Vapours/gases/fumes of: Carbon monoxide (CO). Carbon dioxide (CO2).
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of waste and residues in accordance with local authority requirements.
Dispose of waste and residues in accordance with local authority requirements.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2
- Packing Group
- Not Applicable
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The Aerosol Dispensers (Amendment) Regulations 2014 No.1130; Workplace Exposure Limits EH40; Introduction to Local Exhaust Ventilation HS(G)37.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for SAS470 SPRAY ADHESIVE 500ML?
The signal word is danger.
What is the physical form of SAS470 SPRAY ADHESIVE 500ML?
SAS470 SPRAY ADHESIVE 500ML is a aerosol. appearing as aerosol. with typical color. It has characteristic. odor.
What is SAS470 SPRAY ADHESIVE 500ML used for?
Adhesive.
What are the hazard statements for SAS470 SPRAY ADHESIVE 500ML?
This substance has 5 hazard statements:
- H222: Extremely flammable aerosol.
- H229: Pressurised container: May burst if heated
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
- H412: Harmful to aquatic life with long lasting effects.