Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BIOWELD
- Product Form
- Aerosol
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Welding Products
Manufacturers & Suppliers
CRC Industries UK Ltd.
manufacturer
Wylds Road, Castlefield Industrial Estate, TA6 4DD Bridgwater Somerset, United Kingdom
+44 1278 727200
Emergency Contacts
Emergency Contact
(+44)(0)1278 72 7200
office hours
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| dimethyl ether EC: 204-065-8 | 115-10-6 | 10 - 25% | Yes |
| triethanolamine EC: 203-049-8 | 102-71-6 | 1% | No |
| 1,2-benzisothiazol-3(2H)-one EC: 220-120-9 | 2634-33-5 | 0.05% | Yes |
Explanation notes A : substance with Community workplace exposure limit B : substance with national established workplace exposure limit R : substance in plant protection or biocidal product regarded as being registered (art.15 REACH Regulation No 1907/2006) X : SCL (specific concentration limit)in accordance with art.10 of CLP Regulation No 1272/2008 (* Explanation phrases : see chapter 16)
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove victim to fresh air and keep at rest in a position comfortable for breathing.
Symptoms: No adverse health effects expected
Wash with plenty of soap and water.
Symptoms: May cause irritation.
If substance has got into eyes, immediately wash out with plenty of water
Symptoms: May cause irritation.
If swallowed accidentally, do not induce vomiting and seek medical advice.
Symptoms: May cause gastrointestinal disturbances. Symptoms: sore throat, abdominal pain, nausea, vomiting
Immediate Medical Attention
If symptoms persist always call a doctor.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
water, foam, carbon dioxide or dry agent
Aerosols may explode if heated above 50°C
Keep container(s) exposed to fire cool, by spraying with water
Firefighter Protection
In case of fire, do not breathe fumes
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not allow to enter public sewers and watercourses
Absorb spillage
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep away from heat and sources of ignition. Do not spray on a naked flame or incandescent material. Do not pierce or burn aerosols, even after use. Do not breathe aerosols or vapours. Ensure adequate ventilation. Avoid contact with skin and eyes.
Pressurised container: protect from sunlight and do not expose to temperatures exceeding 50°C. Do not pierce or burn, even after use. Store in a well-ventilated place. Store frost free. Keep out of reach of children.
Avoid contact with skin and eyes.
Keep away from heat and sources of ignition. Do not spray on a naked flame or incandescent material.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation, Keep away from heat and sources of ignition
For incidental contact with the product wear chemical-resistant gloves (standard EN 374). The use of disposable gloves is acceptable provided that they are changed immediately after a splash or spill. Recommended gloves: Nitrile
Wear safety eyewear according to EN 166.
In case of insufficient ventilation, wear suitable respiratory equipment. Recommended respiratory protection: Air purifying respirator equipped with organic gas/vapor cartridge (type A)
For incidental contact with the product wear chemical-resistant gloves (standard EN 374). The use of disposable gloves is acceptable provided that they are changed immediately after a splash or spill.
Avoid release to the environment. Collect spillage.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable
No hazardous reactions known if used for its intended purpose
No hazardous reactions known if used for its intended purpose
Pressurized container : protect from sunlight and do not expose to temperatures exceeding 50°C. Avoid overheating. Store frost free
Strong oxidising agent
CO,CO2
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2.2
- Packing Group
- Not applicable.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The Safety Data Sheet is compiled according to the current European requirements.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BIOWELD?
The signal word is warning.
What is the physical form of BIOWELD?
BIOWELD is a dme propelled liquid. appearing as dme propelled liquid. with milky. color. It has characteristic odor. odor.
What is BIOWELD used for?
Welding Products
What are the hazard statements for BIOWELD?
This substance has 1 hazard statement:
- H229: Pressurised container: May burst if heated.