NextSDS Logo
Safety Data Sheet EN

WELD-ON 735 WET 'N FAST

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
WELD-ON 735 WET 'N FAST

Regulatory Identifiers

CAS Number
N/A
UFI Code
04JU-QP88-7S0P-TM3P

Identified Uses

PVC solvent cement adhesive

Manufacturers & Suppliers

Weld-On logo

Weld-On

manufacturer

17109 S. Main Gardena CA 90248-3127 United States

1-310-898-3300

http://www.weldon.com

Emergency Contacts

CHEMTEL

(800) 255-3924

24 Hours

CHEMTEL

(813) 248-0585

24 Hours

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Flam. Liq. Cat. 2
Acute Tox. Cat. 4
Eye Irrit. Cat. 2
Carc. Cat. 2
STOT SE Cat. 3
STOT SE Cat. 3

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H225 Highly flammable liquid and vapour.
H302 Harmful if swallowed.
H319 Causes serious eye irritation.
H335 May cause respiratory irritation.
H336 May cause drowsiness or dizziness.
H351 Suspected of causing cancer.

Precautionary Statements

P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection.
P370 + P378 In case of fire: Use sand, carbon dioxide or powder extinguisher to extinguish.
P403 + P233 Store in a well-ventilated place. Keep container tightly closed.
P403 + P235 Store in a well-ventilated place. Keep cool.
P405 Store locked up.
P501 Dispose of contents/container to industrial combustion plant.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
tetrahydrofuran EC: 203-726-8 109-99-9 25 - 50% Yes
acetone EC: 200-662-2 67-64-1 25 - 50% Yes
methyl ethyl ketone EC: 201-159-0 78-93-3 1 - 5% Yes
cyclohexanone EC: 203-631-1 108-94-1 1 - 5% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If breathing is irregular or stopped, immediately seek medical assistance and start first aid actions. In case of respiratory tract irritation, consult a physician. Provide fresh air.

Skin contact

Wash with plenty of soap and water.

Eye contact

Remove contact lenses, if present and easy to do. Continue rinsing. Irrigate copiously with clean, fresh water for at least 10 minutes, holding the eyelids apart.

Ingestion

Rinse mouth with water (only if the person is conscious). Do NOT induce vomiting.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray, BC-powder, Carbon dioxide (CO2)

Unsuitable media

Water jet

Specific hazards

In case of insufficient ventilation and/or in use, may form flammable/explosive vapour-air mixture. Solvent vapours are heavier than air and may spread along floors. Places which are not ventilated, e.g. unventilated below ground level areas such as trenches, conduits and shafts, are particularly prone to the presence of flammable substances or mixtures.

Instructions

In case of fire and/or explosion do not breathe fumes. Co-ordinate firefighting measures to the fire surroundings. Fight fire with normal precautions from a reasonable distance.

Firefighter Protection

In case of fire and/or explosion do not breathe fumes.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Remove persons to safety.

Environmental

Keep away from drains, surface and ground water. Retain contaminated washing water and dispose of it.

Cleanup methods

Wipe up with absorbent material (e.g. cloth, fleece). Place in appropriate containers for disposal.

Materials: cloth, fleece, sawdust, kieselgur (diatomite), sand, universal binder

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Use local and general ventilation. Avoidance of ignition sources. Keep away from sources of ignition - No smoking. Take precautionary measures against static discharge. Use only in well-ventilated areas. Due to danger of explosion, prevent leakage of vapours into cellars, flues and ditches. Ground/bond container and receiving equipment. Use explosion-proof electrical/ventilating/lighting/equipment. Use only non-sparking tools.

Storage

Keep container tightly closed and in a well-ventilated place. Keep cool. Protect from sunlight.

Hygiene

Wash hands after use. Do not eat, drink and smoke in work areas. Remove contaminated clothing and protective equipment before entering eating areas. Never keep food or drink in the vicinity of chemicals. Never place chemicals in containers that are normally used for food or drink. Keep away from food, drink and animal feedingstuffs.

Fire prevention

Avoidance of ignition sources. Keep away from sources of ignition - No smoking. Take precautionary measures against static discharge. Use only non-sparking tools.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

General ventilation.

Hands

Wear suitable gloves. Chemical protection gloves are suitable, which are tested according to EN 374. Check leak-tightness/impermeability prior to use. In the case of wanting to use the gloves again, clean them before taking off and air them well. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves.

Eyes

Wear eye/face protection.

Respiratory

In case of inadequate ventilation wear respiratory protection.

Skin/Body

Take recovery periods for skin regeneration. Preventive skin protection (barrier creams/ointments) is recommended. Wash hands thoroughly after handling.

Environmental

Use appropriate container to avoid environmental contamination. Keep away from drains, surface and ground water.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
liquid
Boiling Point
56.05 °C
Form
---
Appearance
---
State Under Standard Conditions
---
Crystallisation Point
---
Vapor Pressure
240 hPa at 20 °C
Odor Threshold
---
Molecular Weight
---
Density
0.9264 g/cm³ at 73 °F
Upper Explosive Limit
not determined
Metal Corrosion
---
Solubility In Water
---
Bulk Density
---
Freezing Point
not determined
Softening Point
---
Partition Coefficient
this information is not available
Explosive Limits
---
Voc Content
<= 425 g/L
Flammability
flammable liquid in accordance with GHS criteria
Relative Density
---
Physical State Data
liquid
Solubility In Fat
---
Solidification Point
---
Vapor Density
---
Colour
blue
Lower Explosive Limit
not determined
Solubility
not determined
Cloud Point
---
Auto Ignition Temperature
215 °C
Decomposition Temperature
not relevant
Relative Evaporation Rate
---
Ph
not determined
Evaporation Rate
---
Dynamic Viscosity
---
Kinematic Viscosity
---
Melting Point
not determined
Properties Status
---
Odor
characteristic
Colour Intensity
---
Flash Point
-21.2 °C at 101.3 kPa
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

See below "Conditions to avoid".

Reactivity

Concerning incompatibility: see below "Conditions to avoid" and "Incompatible materials". The mixture contains reactive substance(s). Risk of ignition. If heated: Risk of ignition

Hazardous reactions

No known hazardous reactions.

Avoid

Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Hints to prevent fire or explosion: Use explosion-proof electrical/ventilating/lighting/equipment. Use only non-sparking tools. Take precautionary measures against static discharge.

Incompatible

Oxidisers

Decomposition

Reasonably anticipated hazardous decomposition products produced as a result of use, storage, spill and heating are not known. Hazardous combustion products: see section 5.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1133
Shipping Name
ADHESIVES
Transport Class
3
Packing Group
II
ADR

Provisions for dangerous goods (ADR) should be complied within the premises.

IMDG

Stowage category B

IATA

Excepted quantities (EQ) E2, Limited quantities (LQ) 1 L

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for WELD-ON 735 WET 'N FAST?

The signal word is danger.

What is the physical form of WELD-ON 735 WET 'N FAST?

WELD-ON 735 WET 'N FAST is a liquid with blue color. It has characteristic odor.

What is the solubility of WELD-ON 735 WET 'N FAST?

not determined

What is WELD-ON 735 WET 'N FAST used for?

PVC solvent cement adhesive

What are the hazard statements for WELD-ON 735 WET 'N FAST?

This substance has 6 hazard statements:

  • H225: Highly flammable liquid and vapour.
  • H302: Harmful if swallowed.
  • H319: Causes serious eye irritation.
  • H335: May cause respiratory irritation.
  • H336: May cause drowsiness or dizziness.
  • H351: Suspected of causing cancer.

What is the melting point of WELD-ON 735 WET 'N FAST?

The melting point is not determined and the boiling point is 56.05 °C.