NextSDS Logo
Safety Data Sheet EN

RTD COMPOUND

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
RTD COMPOUND
Product Form
Mixture

Regulatory Identifiers

CAS Number
N/A
UFI Code
QNA0-N08P-Y00Q-EQ86

Identified Uses

Lubricants, Greases and Release Products

Uses advised against

No additional information available

Manufacturers & Suppliers

ROCOL a division of ITW Ltd logo

ROCOL a division of ITW Ltd

manufacturer

Rocol House Wakefield Rd, Swillington, LS26 8BS Leeds – West Yorkshire, United Kingdom

+44 (0)113 232 2600

http://www.rocol.com

Emergency Contacts

Emergency Contact

+44 (0)113 232 2600

National Poisons Information Service (Birmingham Centre) City Hospital

0344 892 0111

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Lact. Cat. Add. H362
Aquatic Acute Cat. 1 H400
Aquatic Chronic Cat. 1 H410

GHS Pictograms

GHS09 - Environmental hazard

GHS09

Hazard Statements

H362 May cause harm to breast-fed children.
H410 Very toxic to aquatic life with long lasting effects.

Precautionary Statements

P201 Obtain special instructions before use.
P263 Avoid contact during pregnancy and while nursing.
P308 + P313 IF exposed or concerned: Get medical advice/attention.
P391 Collect spillage.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
C14-C17 CHLORINATED PARAFFIN EC: 287-477-0 85535-85-9 50 - 70% Yes
2-(4-methylcyclohex-3-en-1-yl)propan-2-ol EC: 701-188-3 8000-41-7 0.1 - 1% Yes

Notes

Full text of H- and EUH-statements: see section 16

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Allow affected person to breathe fresh air. Allow the victim to rest.

Skin contact

Wash skin with plenty of water. If skin irritation occurs: Get medical advice/attention.

Eye contact

Rinse immediately with plenty of water. Obtain medical attention if pain, blinking or redness persists.

Ingestion

Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Foam. Dry powder. Carbon dioxide. Water spray. Sand.

Unsuitable media

Do not use a heavy water stream.

Instructions

Use water spray or fog for cooling exposed containers. Exercise caution when fighting any chemical fire. Prevent fire fighting water from entering the environment.

Firefighter Protection

Do not enter fire area without proper protective equipment, including respiratory protection.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Evacuate unnecessary personnel.

Environmental

Prevent entry to sewers and public waters. Notify authorities if liquid enters sewers or public waters. Avoid release to the environment.

Cleanup methods

On land, sweep or shovel into suitable containers.

Materials: suitable containers

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Provide good ventilation in process area to prevent formation of vapour. Avoid contact during pregnancy/while nursing. Do not breathe dust/fume/gas/mist/vapours/spray.

Storage

Keep container closed when not in use. Keep only in original container.

Hygiene

Do not eat, drink or smoke when using this product. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Wear protective gloves. Nitrile rubber gloves

Eyes

Chemical goggles or safety glasses

Respiratory

Not required for normal conditions of use. In case of insufficient ventilation, wear suitable respiratory equipment. Wear a respirator conforming to EN140 with Type A filter or better

Environmental

Consumer exposure controls: Avoid contact during pregnancy/while nursing.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Solid
Physical State Data
solid
State Under Standard Conditions
---
Appearance
---
Colour
brown.
Colour Intensity
---
Form
---
Odor
characteristic.
Odor Threshold
Not available
Ph
Not available
Melting Point
Not available
Boiling Point
Not available
Flash Point
> 100 °C
Freezing Point
Not available
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
Not available
Vapor Density
---
Relative Density
≈ 1.17
Bulk Density
---
Density
Not available
Flammability
Non flammable.
Upper Explosive Limit
Not applicable
Lower Explosive Limit
Not applicable
Explosive Limits
---
Auto Ignition Temperature
> 200 °C
Decomposition Temperature
Not available
Solubility
Not available
Partition Coefficient
Not available
Solubility In Water
---
Solubility In Fat
---
Molecular Weight
---
Voc Content
0 g/l
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
Not applicable
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Not established.

Reactivity

No additional information available

Hazardous reactions

Not established.

Avoid

Direct sunlight. Extremely high or low temperatures.

Incompatible

Strong acids. Strong bases.

Decomposition

fume. Carbon monoxide. Carbon dioxide.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Dispose in a safe manner in accordance with local/national regulations. Dispose of contents/container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation.

Disposal

Dispose in a safe manner in accordance with local/national regulations. Dispose of contents/container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
3077
Shipping Name
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S.
Transport Class
9
Packing Group
III
ADR

Special provisions for carriage - Packages (ADR): V13; Special provisions for carriage - Bulk (ADR): VC1, VC2; Special provisions for carriage - Loading, unloading and handling (ADR): CV13

IMDG

Stowage and handling (IMDG): SW23

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for RTD COMPOUND?

The signal word is warning.

What is the physical form of RTD COMPOUND?

RTD COMPOUND is a solid with brown. color. It has characteristic. odor.

What is the solubility of RTD COMPOUND?

Not available

What is RTD COMPOUND used for?

Lubricants, Greases and Release Products

What are the hazard statements for RTD COMPOUND?

This substance has 2 hazard statements:

  • H362: May cause harm to breast-fed children.
  • H410: Very toxic to aquatic life with long lasting effects.

What is the melting point of RTD COMPOUND?

The melting point is Not available and the boiling point is Not available.