Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- RTD SPRAY
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricant for reaming, tapping and drilling.
Manufacturers & Suppliers
ROCOL
manufacturer
ROCOL House, Swillington, Leeds, West Yorkshire, LS26 8BS, ENGLAND
+44 (0) 113 232 2700
Emergency Contacts
Emergency Contact
+44 (0) 113 232 2600
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| HYDROCARBON AEROSOL PROPELLANT (<0.1% 1,3-BUTADIENE) EC: 270-704-2 | 68476-85-7 | 30 - 50% | Yes |
| C14-C17 CHLORINATED PARAFFIN EC: 287-477-0 | 85535-85-9 | 20 - 30% | Yes |
| CYCLOPENTANE EC: 206-016-6 | 287-92-3 | 20 - 30% | Yes |
| TERPINEOL EC: 232-268-1 | 8000-41-7 | 0.3% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove casualty from exposure ensuring one's own safety whilst doing so.
Symptoms: No symptoms.
Wash immediately with plenty of soap and water.
Symptoms: There may be mild irritation at the site of contact. May cause harm to breastfed babies.
Bathe the eye with running water for 15 minutes.
Symptoms: There may be irritation and redness.
Wash out mouth with water.
Symptoms: There may be irritation of the throat.
Immediate Medical Attention
Consult a doctor.
Medical Treatment
Not applicable.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Suitable extinguishing media for the surrounding fire should be used.
In combustion emits toxic fumes.
Use water spray to cool containers.
Firefighter Protection
Wear self-contained breathing apparatus. Wear protective clothing to prevent contact with skin and eyes.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Turn leaking containers leak-side up to prevent the escape of liquid. Mark out the contaminated area with signs and prevent access to unauthorised personnel.
Do not discharge into drains or rivers. Contain the spillage using bunding.
Absorb into dry earth or sand. Transfer to a closable, labelled salvage container for disposal by an appropriate method.
Materials: dry earth or sand
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure there is sufficient ventilation of the area. Do not handle in a confined space. Smoking is forbidden.
Store in a cool, well ventilated area. Keep container tightly closed. The floor of the storage room must be impermeable to prevent the escape of liquids.
Smoking is forbidden.
Smoking is forbidden.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
The floor of the storage room must be impermeable to prevent the escape of liquids.
Protective gloves.
Safety glasses.
Gas/vapour filter, type B: inorganic vapours excl. CO (EN141).
Protective clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Stable under recommended transport or storage conditions.
Hazardous reactions will not occur under normal transport or storage conditions.
Heat.
Strong oxidising agents. Strong acids.
In combustion emits toxic fumes.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1950
- Shipping Name
- AEROSOLS, FLAMMABLE
- Transport Class
- 2.1
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for RTD SPRAY?
The signal word is danger.
What is the physical form of RTD SPRAY?
RTD SPRAY is a aerosol with brown color. It has characteristic odour odor.
What is RTD SPRAY used for?
Lubricant for reaming, tapping and drilling.
What are the hazard statements for RTD SPRAY?
This substance has 5 hazard statements:
- H222: Extremely flammable aerosol.
- H229: Pressurised container: May burst if heated.
- H362: May cause harm to breast-fed children.
- H400: Very toxic to aquatic life.
- H410: Very toxic to aquatic life with long lasting effects.
What is the melting point of RTD SPRAY?
The melting point is No data available. and the boiling point is <0 °C.