Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Speedball Screen Filler
- Product Form
- Water-soluble fluid
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
The product is intended for general (adults) arts and crafts purposes.
Manufacturers & Suppliers
Speedball Europe
manufacturer
Villantipolis 5 473 route des Dollines 06560 Valbonne, France
+33 6 03 36 21 73
Emergency Contacts
Infotrac
1-352-323-3500
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
The other ingredients in the product are either considered non-hazardous or are below their respective GHS cut-off values/concentration limits in the final product and were therefore not disclosed in the SDS.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Talca EC: 238-877-9 | 14807-96-6 | 4.24% | No |
| Crystalline silica (quartz) EC: 238-878-4 | 14808-60-7 | 0.04% | Yes |
Notes
This SDS was prepared under the assumption that the polymers contained in the mixtures HYDRIPRINT 604 and HYDRIPRINT 243 LV, and the ingredient styrene acrylic resin solution contained within the mixture, Hydricryl 132 are present in the final product as fully reacted/cured, high-molecular weight, and highly stable polymers with negligible residual monomers present (<0.1%).
First Aid Measures
Emergency procedures for chemical exposure incidents
No specific first aid measures are required. If exposed to excessive levels of material in the air, move the exposed person to fresh air. Seek medical attention if in doubt.
Symptoms: Inhalation route of exposure is not anticipated with intended use.
No specific first aid measures are required. If irritation occurs, wash with plenty of water and soap. Take off contaminated clothing. If skin irritation persists: Get medical advice/attention.
Symptoms: Irritation, skin irritation persists.
No specific first aid measures are required. As a precaution, remove contact lenses, if worn, and immediately flush eyes with water. Seek medical attention if in doubt.
No specific first aid measures are required. Rinse mouth with water. Do not induce vomiting. Never give anything by mouth to an unconscious person. Seek medical attention if in doubt.
Immediate Medical Attention
Not required.
Medical Treatment
Not required.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No special requirements under ordinary conditions of use and with adequate ventilation. Mechanical ventilation or local exhaust ventilation may be required.
Use good industrial hygiene practices to avoid skin contact. If contact with the material may occur, wear chemically protective gloves.
If contact is likely, safety glasses with side shields are recommended.
Under normal conditions of use, respirator is not usually required. Use appropriate respiratory protection if exposure to dust particles, mist or vapors is likely. Consult with an industrial hygienist to determine the appropriate respiratory protection for your specific use of this material. A respiratory protection program compliant with all applicable regulations must be followed whenever workplace conditions require the use of a respirator.
Gloves, coveralls, apron, boots as necessary to minimize contact. Do not wear rings, watches or similar apparel that could entrap the material.
Not available.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Speedball Screen Filler?
The signal word is no signal word.
What is the physical form of Speedball Screen Filler?
Speedball Screen Filler is a liquid appearing as liquid with red oxide color. It has not available odor.
What is Speedball Screen Filler used for?
The product is intended for general (adults) arts and crafts purposes.
What is the melting point of Speedball Screen Filler?
The melting point is Not available and the boiling point is Not available.