NextSDS Logo
Safety Data Sheet EN

Speedball Screen Filler

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Speedball Screen Filler
Product Form
fluid

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Water-soluble fluid used for screen printing that is applied using a squeegee.

Manufacturers & Suppliers

S

Speedball Art Products Company, LLC

manufacturer

2301 Speedball Rd, Statesville, NC 28677 USA

+1 (704) 838-1475

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Not Classified

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Talca EC: 238-877-9 14807-96-6 4.24% No
Crystalline silica b EC: 238-878-4 14808-60-7 0.04% Yes

This SDS was prepared under the assumption that the polymers contained in the mixtures HYDRIPRINT™ 604 and HYDRIPRINT™ 243 LV, and the ingredient styrene acrylic resin solution contained within the mixture, Hydricryl 132 are present in the final product as fully reacted/cured, high-molecular weight, and highly stable polymers with negligible residual monomers present (<0.1%).

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If exposed to excessive levels of material in the air, move the exposed person to fresh air.

Skin contact

If irritation occurs, wash with plenty of water and soap. Take off contaminated clothing.

Eye contact

Remove contact lenses, if worn, and immediately flush eyes with water.

Ingestion

Rinse mouth with water. Do not induce vomiting. Never give anything by mouth to an unconscious person.

Immediate Medical Attention

Seek medical attention if in doubt.

Medical Treatment

Not required.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use extinguishing media suitable for surrounding area if material is involved in a fire (e.g., water fog, foam, dry chemical or carbon dioxide).

Unsuitable media

None known.

Specific hazards

Irritating vapours or fumes may form if product is involved in fire

Firefighter Protection

Wear a self-contained breathing apparatus to protect against potentially irritating vapours or fumes.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Not available.

Environmental

Prevent entry and contact with soil, drains, sewers, and waterways. Prevent further leakage or spillage if it is safe to do so.

Cleanup methods

Collect recoverable product and place in a designated container for recycle and/or disposal.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Wash hands thoroughly after handling. Wash contaminated clothing before reuse. Employees should be trained in the safe use and handling of chemical materials. Refer to Section 8 - Exposure Controls/Personal Protection.

Storage

Keep in a cool dry place. Keep container tightly closed to avoid spills.

Hygiene

Wash hands thoroughly after handling. Wash contaminated clothing before reuse.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

No special requirements under ordinary conditions of use and with adequate ventilation. Mechanical ventilation or local exhaust ventilation may be required.

Hands

Use good industrial hygiene practices to avoid skin contact. If contact with the material may occur, wear chemically protective gloves.

Eyes

If contact is likely, safety glasses with side shields are recommended.

Respiratory

Under normal conditions of use, respirator is not usually required. Use appropriate respiratory protection if exposure to dust particles, mist or vapors is likely. Consult with an industrial hygienist to determine the appropriate respiratory protection for your specific use of this material. A respiratory protection program compliant with all applicable regulations must be followed whenever workplace conditions require the use of a respirator.

Skin/Body

Gloves, coveralls, apron, boots as necessary to minimize contact. Do not wear rings, watches or similar apparel that could entrap the material.

Environmental

Not available.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Properties Status
---
Boiling Point
Not available
Evaporation Rate
Not available
Cloud Point
---
Appearance
Liquid
Kinematic Viscosity
---
Solubility In Fat
---
Density
---
Colour
Red oxide
Colour Intensity
---
Dynamic Viscosity
Not available
Solidification Point
---
Softening Point
---
Relative Evaporation Rate
---
Upper Explosive Limit
Not available
Melting Point
Not available
Solubility In Water
Not available
Form
---
Vapor Density
Not available
Explosive Limits
---
Flash Point
Not available
Flammability
Not available
Partition Coefficient
Not available
Solubility
---
Molecular Weight
Not available
Odor
---
Vapor Pressure
Not available
Voc Content
Not available
Lower Explosive Limit
Not available
Metal Corrosion
---
Physical State
Liquid
Auto Ignition Temperature
Not available
Ph
7 - 8
Odor Threshold
---
Crystallisation Point
---
Bulk Density
---
Freezing Point
Not available
Relative Density
Not available
Physical State Data
liquid
Decomposition Temperature
Not available
State Under Standard Conditions
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

This material is considered stable under normal handling and storage conditions.

Reactivity

This material is not considered to be reactive under normal handling and storage conditions.

Hazardous reactions

Not expected to occur under normal handling and storage conditions.

Avoid

Exposure to high temperatures

Incompatible

Strong acids, Strong bases, Strong oxidisers

Decomposition

Thermal decomposition or combustion may generate smoke, carbon monoxide, carbon dioxide, and other products of incomplete combustion. Irritating and toxic substances may be emitted upon combustion, burning, or decomposition of dry solids.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Speedball Screen Filler?

The signal word is no signal word.

What is the physical form of Speedball Screen Filler?

Speedball Screen Filler is a liquid appearing as liquid with red oxide color.

What is Speedball Screen Filler used for?

Water-soluble fluid used for screen printing that is applied using a squeegee.

What is the melting point of Speedball Screen Filler?

The melting point is Not available and the boiling point is Not available.