Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- KGS2SW GLASUR WEISS
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- XX60-A0KN-P002-NCSV
Identified Uses
Ceramic use.
Uses advised against
Uses other than those recommended.
Manufacturers & Suppliers
REIMBOLD UND STRICK HANDELS
Hansestr. 70 51149 Kln
+49 2203 8985-0
www.reimbold-und-strick.de
Emergency Contacts
RSD
+ 49(0) 70024112112
24 hours
RSD
+1 872 5888271
24 hours
RSD
+11 49(0) 70024112112
24 hours
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Substances posing a danger to health or the environment in accordance with the Regulation (EC) No. 1272/2008, assigned a Community exposure limit in the workplace, and classified as PBT/vPvB or included in the Candidate List
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Kaolien EC: 310-194-1 | 1332-58-7 | 10 - 25% | No |
| silica EC: 238-878-4 | 14808-60-7 | 1 - 2.5% | Yes |
| ZnO EC: 215-222-5 | 1314-13-2 | 1 - 2.5% | Yes |
The substance 'circon' (CAS: 14940-68-2) contains less than 0.015% respirable crystalline silica (SCR). Likewise, this material is considered a Naturally Occurring Radioactive Material (NORM) (radioactive material according to IAEA if it exceeds 1 Bq /g). However, it is not considered a radioactive product regarding transport issues; limit of 10 Bq/g for NORM. Some countries may apply different limits; therefore, local regulations should be consulted to find out the current requirements. Uranium <340 ppm 3.5 - 4.0 Bq/g Thorium <150 ppm 0.5 - 0.6 Bq/g Other daughter nuclides: in secular equilibrium
Notes
The complete text of the H phrases is given in section 16 of this Safety Data Sheet.
First Aid Measures
Emergency procedures for chemical exposure incidents
Take the victim into open air; keep them warm and calm. If breathing is irregular or stops, perform artificial respiration.
Remove contaminated clothing. Wash skin vigorously with water and soap or a suitable skin cleaner. NEVER use solvents or thinners.
Remove contact lenses, if present and if it is easy to do. Wash eyes with plenty of clean and cool water for at least 10 minutes while pulling eyelids up, and seek medical assistance. Dont let the person to rub the affected eye.
If accidentally ingested, seek immediate medical attention. Keep calm. NEVER induce vomiting.
Immediate Medical Attention
If accidentally ingested, seek immediate medical attention. For eye contact, seek medical assistance. Keep the person comfortable. Turn him/her over to the left side and stay there while waiting for medical care.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
KGS1SW GLASUR FARBLOS
UFI: 3N71-X0CU-W00A-GHF9
KGM36SW GLASUR FARBLOS
UFI: 7S50-300T-K00S-5S7X
K2764 FK SCHWARZ
CAS: 68186-94-7
Zinkweiss Rotsiegel
---
SPEZIAL-SIGNIERFARBE SCHWARZ
---
GLYSANTIN G48 RM/50 bg DE blue-green
---
Blattglanz Rezeptur 2007 o. Duft
---
GLAZE STAIN BLACK CT1701
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide adequate ventilation, which can be achieved by using good local exhaust-ventilation and a good general exhaust system.
Protective gloves against chemicals. CE marking, category III. CEN standards: EN 374-1, En 374-2, EN 374-3, EN 420. Maintenance: Keep in a dry place, away from any sources of heat, and avoid exposure to sunlight as much as possible. Do not make any changes to the gloves that may alter their resistance, or apply paints, solvents or adhesives. Observations: Gloves should be of the appropriate size and fit the user's hand well, not being too loose or too tight. Always use with clean, dry hands. Material: PVC (polyvinyl chloride), Breakthrough time (min.): > 480, Material thickness (mm): 0,35
Protective goggles against particle impacts. CE marking, category II. Eye protector against dust and smoke. CEN standards: EN 165, EN 166, EN 167, EN 168. Maintenance: Visibility through lenses should be ideal. Therefore, these parts should be cleaned daily. Protectors should be disinfected periodically following the manufacturer's instructions. Observations: Some signs of wear and tear include: yellow colouring of the lenses, superficial scratching of the lenses, scraping etc.
Filter mask for protection against particles. CE marking, category III. The mask must have a wide field of vision and an anatomically designed form in order to be sealed and watertight. CEN standards: EN 149. Maintenance: The mask must be changed periodically and in any case after every work shift. Never modificate the equipment. Observations: Use when exceeding TLV for one or more substances conteined in the mixture.
If the product is handled correctly, no individual protection equipment is necessary.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for KGS2SW GLASUR WEISS?
The signal word is warning.
What is the physical form of KGS2SW GLASUR WEISS?
KGS2SW GLASUR WEISS is a solid appearing as powder with n.a./n.a. color. It has odourless odor.
What is the solubility of KGS2SW GLASUR WEISS?
not available
What is KGS2SW GLASUR WEISS used for?
Ceramic use.
What are the hazard statements for KGS2SW GLASUR WEISS?
This substance has 2 hazard statements:
- H373: May cause damage to organs through prolonged or repeated exposure.
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of KGS2SW GLASUR WEISS?
The melting point is not available C and the boiling point is N.A./N.A..