Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Leadless Transparent Mid. Temp. Glaze
- Product Code
- P2027
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Ceramic Glaze
Manufacturers & Suppliers
Potterycrafts Ltd.
Campbell Road, Stoke-on-Trent, Staffordshire, UK. ST4 4ET.
44 (0)1782 745000
Emergency Contacts
Emergency Contact
+44(0) 1782 745000
Office Hours Mon-Friday 08:45 – 16:30 hours
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Hazard Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
80 - 95% Frits, chemical group 1
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Frits, chemical group 1 EC: 266-047-6 | 65997-18-4 | 80 - 95% | No |
Notes
No classified ingredients, or those having occupational exposure limits, present above the levels of disclosure.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move affected person to fresh air at once. Get medical attention if any discomfort continues.
Wash skin thoroughly with soap and water. Get medical attention if irritation persists after washing.
Rinse with water. Get medical attention if any discomfort continues.
Do not induce vomiting. Give a few small glasses of water or milk to drink. Never give anything by mouth to an unconscious person. Get medical attention if any discomfort continues.
Immediate Medical Attention
Get medical attention if any discomfort continues.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use fire-extinguishing media suitable for the surrounding fire.
No unusual fire or explosion hazards noted.
Firefighter Protection
Use protective equipment appropriate for surrounding materials.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid spreading dust or contaminated materials.
Remove spillage with vacuum cleaner. If not possible, collect spillage with shovel, broom or the like.
Materials: vacuum cleaner, shovel, broom
Related Products
Similar products with comparable safety profiles
Transparent Low. Temp. Glaze
---
Transparent Leadless Glossy Glaze
---
Transparent Leadless Stoneware Glaze
---
Transparent Leadless Stoneware Glaze
---
Transparent Leadless Stoneware Glaze
---
Transparent Leadless Stoneware Glaze
---
Transparent Matte Leadless Stoneware Glaze
---
Transparent Unleaded Glaze
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not eat, drink or smoke when using the product. Good personal hygiene procedures should be implemented. Wash hands and any other contaminated areas of the body with soap and water before leaving the work site.
Keep container dry.
Do not eat, drink or smoke when using the product. Good personal hygiene procedures should be implemented. Wash hands and any other contaminated areas of the body with soap and water before leaving the work site.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide adequate general and local exhaust ventilation. Observe any occupational exposure limits for the product or ingredients.
Chemical-resistant, impervious gloves complying with an approved standard should be worn if a risk assessment indicates skin contact is possible.
Eyewear complying with an approved standard should be worn if a risk assessment indicates eye contact is possible. The following protection should be worn: Dust-resistant, chemical splash goggles.
No specific recommendations. Protection against nuisance dust must be used when the airborne concentration exceeds 10 mg/m3.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal ambient temperatures and when used as recommended.
Not relevant
Not known.
No specific material or group of materials is likely to react with the product to produce a hazardous situation.
Not known
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of waste to licensed waste disposal site in accordance with the requirements of the local Waste Disposal Authority.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Not applicable.
- Shipping Name
- Not applicable.
- Transport Class
- No transport warning sign required.
- Packing Group
- Not applicable.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Leadless Transparent Mid. Temp. Glaze?
The signal word is no signal word.
What is the physical form of Leadless Transparent Mid. Temp. Glaze?
Leadless Transparent Mid. Temp. Glaze is a dusty powder appearing as white dusty powder. with white color. It has odourless. odor.
What is the solubility of Leadless Transparent Mid. Temp. Glaze?
Insoluble in water.
What is Leadless Transparent Mid. Temp. Glaze used for?
Ceramic Glaze
What are the hazard statements for Leadless Transparent Mid. Temp. Glaze?
This substance has 1 hazard statement:
- Not Classified