NextSDS Logo
Safety Data Sheet EN

Transparent Low. Temp. Glaze

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Transparent Low. Temp. Glaze
Product Code
P2011

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Ceramic Glaze

Manufacturers & Suppliers

P

Potterycrafts Ltd.

Campbell Road, Stoke-on-Trent, Staffordshire, UK. ST4 4ET.

44 (0)1782 745000

Emergency Contacts

Emergency Contact

+44(0) 1782 745000

Mon-Friday 08:45 – 16:30 hours

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Not Classified
Not Classified
Not Classified

GHS Pictograms

Hazard Statements

Not Classified

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

80 - 95% Frits, chemical group 1

Chemical Name CAS Number Concentration Hazardous
Frits, chemical group 1 EC: 266-047-6 65997-18-4 80 - 95% No

Notes

No classified ingredients, or those having occupational exposure limits, present above the levels of disclosure.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move affected person to fresh air at once. Get medical attention if any discomfort continues.

Skin contact

Wash skin thoroughly with soap and water. Get medical attention if irritation persists after washing.

Eye contact

Rinse with water. Get medical attention if any discomfort continues.

Ingestion

Do not induce vomiting. Give a few small glasses of water or milk to drink. Never give anything by mouth to an unconscious person. Get medical attention if any discomfort continues.

Immediate Medical Attention

Get medical attention if any discomfort continues.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use fire-extinguishing media suitable for the surrounding fire.

Specific hazards

No unusual fire or explosion hazards noted.

Firefighter Protection

Use protective equipment appropriate for surrounding materials.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Environmental

Avoid spreading dust or contaminated materials.

Cleanup methods

Remove spillage with vacuum cleaner. If not possible, collect spillage with shovel, broom or the like.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Do not eat, drink or smoke when using the product. Good personal hygiene procedures should be implemented. Wash hands and any other contaminated areas of the body with soap and water before leaving the work site.

Storage

Keep container dry.

Hygiene

Do not eat, drink or smoke when using the product. Good personal hygiene procedures should be implemented. Wash hands and any other contaminated areas of the body with soap and water before leaving the work site.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Provide adequate general and local exhaust ventilation. Observe any occupational exposure limits for the product or ingredients.

Hands

Chemical-resistant, impervious gloves complying with an approved standard should be worn if a risk assessment indicates skin contact is possible.

Eyes

Eyewear complying with an approved standard should be worn if a risk assessment indicates eye contact is possible. The following protection should be worn: Dust-resistant, chemical splash goggles.

Respiratory

No specific recommendations. Protection against nuisance dust must be used when the airborne concentration exceeds 10 mg/m³.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Flash Point
Not applicable
Relative Density
---
Auto Ignition Temperature
---
Dynamic Viscosity
---
Physical State
White Dusty powder
State Under Standard Conditions
---
Properties Status
---
Form
powder
Ph
Not determined
Physical State Data
solid
Solubility
Insoluble in water.
Metal Corrosion
---
Odor Threshold
---
Colour Intensity
---
Evaporation Rate
Not applicable
Lower Explosive Limit
---
Voc Content
---
Freezing Point
---
Melting Point
---
Odor
Odourless
Solidification Point
---
Kinematic Viscosity
---
Bulk Density
---
Solubility In Water
Insoluble in water
Solubility In Fat
---
Appearance
White Dusty powder
Colour
White
Density
---
Upper Explosive Limit
---
Crystallisation Point
---
Flammability
---
Softening Point
---
Vapor Density
Not relevant
Vapor Pressure
---
Cloud Point
---
Partition Coefficient
---
Explosive Limits
---
Boiling Point
---
Decomposition Temperature
---
Molecular Weight
---
Relative Evaporation Rate
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable at normal ambient temperatures and when used as recommended.

Hazardous reactions

Not relevant

Avoid

Not known.

Incompatible

No specific material or group of materials is likely to react with the product to produce a hazardous situation.

Decomposition

Not known

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Dispose of waste to licensed waste disposal site in accordance with the requirements of the local Waste Disposal Authority.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
Not applicable.
Shipping Name
Not applicable.
Transport Class
No transport warning sign required.
Packing Group
Not applicable.
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Transparent Low. Temp. Glaze?

The signal word is no signal word.

What is the physical form of Transparent Low. Temp. Glaze?

Transparent Low. Temp. Glaze is a white dusty powder appearing as white dusty powder with white color. It has odourless odor.

What is the solubility of Transparent Low. Temp. Glaze?

Insoluble in water.

What is Transparent Low. Temp. Glaze used for?

Ceramic Glaze

What are the hazard statements for Transparent Low. Temp. Glaze?

This substance has 1 hazard statement:

  • Not Classified