Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Prevulcanised latex
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Raw material. Industrial use.
Manufacturers & Suppliers
Esprit Composite
national supplier
22, Rue Gassendi, F-75014 Paris, France
+33 1 4044 4797
http://www.espritcomposite.com
Emergency Contacts
NHS Direct England or Wales
+44 0845 4647
NHS 24 Scotland (UK only)
+44 08454 242424
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air. If signs/symptoms continue, get medical attention.
Wash off immediately with soap and plenty of water. Remove contaminated clothing. If irritation develops, get medical attention. Wash contaminated clothing before reuse.
Symptoms: Irritation of skin
Hold eyelids apart and flush eyes with plenty of water for at least 15 minutes. Get medical attention.
Symptoms: Irritation of eyes
Do NOT induce vomiting. Drink plenty of water. Never give anything by mouth to an unconscious person. Get medical attention if symptoms occur.
Symptoms: Nausea
Immediate Medical Attention
Get medical attention if symptoms occur. Show this safety data sheet to the doctor in attendance.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Not combustible. Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
No information available.
In case of fire and/or explosion do not breathe fumes.
Firefighter Protection
Wear suitable protective equipment. In the event of fire, wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Prevent further leakage or spillage if safe to do so.
Large spills should be collected mechanically (remove by pumping) for disposal.
The product should not be allowed to enter drains, water courses or the soil.
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Pick up and transfer to properly labeled containers.
Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wear personal protective equipment. For personal protection see section 8. Avoid inhalation, ingestion and contact with skin and eyes.
Keep containers tightly closed in a dry, cool and well-ventilated place. Store between 5 and 35 °C in a dry, well ventilated place away from sources of heat, ignition and direct sunlight.
Smoking, eating and drinking should be prohibited in the application area.
Do not use in areas without adequate ventilation.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation, especially in confined areas.
Protective gloves complying with EN 374. Gloves should be discarded and replaced if there is any indication of degradation or chemical breakthrough.
Safety glasses with side-shields conforming to EN166
In case of insufficient ventilation, wear suitable respiratory equipment. Respiratory protection complying with EN 141.
Wear suitable protective clothing. Skin should be washed after contact. Remove and wash contaminated clothing before re- use.
The product should not be allowed to enter drains, water courses or the soil.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.2 Persistence and degradability
No data available for the product. Natural rubber is expected to be biodegradable.
12.3 Bioaccumulative potential
Bioaccumulation is considered unlikely for both the product and the component Rubber, natural.
12.4 Mobility in soil
No data available regarding the mobility of the product in soil.
12.5 Results of PBT and vPvB assessment
The mixture does not contain any substances classified as PBT or vPvB.
12.6 Other adverse effects
The product has no known eco-toxicological effects.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
This mixture is not classified as dangerous according to Directive 1999/45/EC.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Prevulcanised latex?
The signal word is no signal word.
What is the physical form of Prevulcanised latex?
Prevulcanised latex is a liquid appearing as liquid white . It has ammoniacal odor.
What is the solubility of Prevulcanised latex?
Completely miscible in all proportions
What is Prevulcanised latex used for?
Raw material. Industrial use.
What is the melting point of Prevulcanised latex?
The melting point is no data available and the boiling point is ca 100.