NextSDS Logo
Safety Data Sheet EN

Keltan ® 1519R Maleic Anhydride grafted ethylene propylene rubber

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Keltan ® 1519R Maleic Anhydride grafted ethylene propylene rubber
Product Code
21000163

Regulatory Identifiers

CAS Number
N/A

Identified Uses

crude product for the production of technical rubber articles

Uses advised against

For industrial use only.

Manufacturers & Suppliers

A

ARLANXEO Brasil S.A.

manufacturer

Rua Marumbi 600 Duque de Caxias RJ RJ 25221-000 Brazil

+550551131643219

Emergency Contacts

Chemtrec

+18004249300

Chemtrec Int'l.

+17035273887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

GHS Pictograms

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Polymer Ethylene-propylene-diene-rubber (EPDM)

Chemical Name CAS Number Concentration Hazardous
maleic anhydride 108-31-6 0.1 - 1% No

Notes

Any concentration shown as a range is to protect confidentiality or is due to batch variation.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If inhaled, remove to fresh air.

Skin contact

Wash off with soap and water.

Eye contact

Flush eyes with water as a precaution.

Immediate Medical Attention

Get medical attention if symptoms occur.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray, Foam, Dry chemical, Carbon dioxide (CO2). Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.

Unsuitable media

None known.

Specific hazards

Toxic and irritating gases/fumes may be given off during burning or thermal decomposition.

Instructions

Promptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire. No action shall be taken involving any personal risk or without suitable training.

Firefighter Protection

Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

No action shall be taken involving any personal risk or without suitable training. Put on appropriate personal protection equipment. Do not touch or walk through spilled material. Evacuate personnel to safe areas. Keep unnecessary and unprotected personnel from entering.

Environmental

Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers.

Cleanup methods

Vacuum or sweep up material and place in a designated, labeled waste container.

—

Related Products

Similar products with comparable safety profiles

E

Elastollan ET 19550 000

---

E

Elastollan ET 19550 000

---

K

KELTROL® ADVANCED PERFORMANCE RD

CAS: 11138-66-2

E

Ethylene glycol diacrylate

CAS: 2274-11-5

P

Propylene Polymer Grade

CAS: 115-07-1

H

HiTEC® 151 Performance Additive

UFI: CRQH-X0YS-R00V-33Y4

P

Propylene - Polymer Grade

CAS: 115-07-1

P

Propylene - Polymer Grade

CAS: 115-07-1

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Remove contaminated clothing and protective equipment before entering eating areas. Workers should wash hands and face before eating, drinking and smoking. Put on appropriate personal protection equipment. Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed.

Storage

Protect from moisture. Store in accordance with local regulations. Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials (see Section 10) and food and drink. Keep container closed when not in use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabeled containers. Use appropriate container to avoid environmental contamination.

Hygiene

Workers should wash hands and face before eating, drinking and smoking. Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
solid
Physical State Data
solid
State Under Standard Conditions
---
Appearance
bales
Colour
amber
Colour Intensity
---
Form
---
Odor
rubber
Odor Threshold
---
Ph
---
Melting Point
---
Boiling Point
---
Flash Point
---
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
---
Vapor Density
---
Relative Density
---
Bulk Density
---
Density
---
Flammability
---
Upper Explosive Limit
---
Lower Explosive Limit
---
Explosive Limits
---
Auto Ignition Temperature
> 698 °F / > 370 °C
Decomposition Temperature
> 572 °F / > 300 °C
Solubility
---
Partition Coefficient
---
Solubility In Water
---
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

The product is stable.

Reactivity

No specific test data related to reactivity available for this product or its ingredients.

Hazardous reactions

None known.

Avoid

Extremes of temperature and direct sunlight.

Incompatible

No specific data.

Decomposition

Caused by smouldering and incomplete combustion toxic fumes mainly consisting of CO and CO2 may be developed. Degradation products of the polymers and their additives may also be formed.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

Ecotoxicity

Toxicity to fish: LC50 (Oncorhynchus mykiss (rainbow trout)): 75 mg/l Exposure time: 96 h Method: EPA-660/3-75-009 GLP: no Toxicity to daphnia and other aquatic invertebrates: EC50 (Daphnia magna (Water flea)): 42,81 mg/l End point: Immobilization Exposure time: 48 h Method: OECD Test Guideline 202 GLP: yes Remarks: The tests were carried out on the hydrolysis products. Toxicity to algae/aquatic plants: EC50 (Pseudokirchneriella subcapitata (microalgae)): 74,35 mg/l End point: Growth rate Exposure time: 72 h Method: OECD Test Guideline 201 GLP: yes Remarks: The tests were carried out on the hydrolysis products. EC10 (Pseudokirchneriella subcapitata (microalgae)): 11,8 mg/l End point: Growth rate Exposure time: 72 h Method: OECD Test Guideline 201 GLP: yes Remarks: The tests were carried out on the hydrolysis products. Toxicity to daphnia and other aquatic invertebrates (Chronic toxicity): NOEC (Daphnia magna (Water flea)): 10 mg/l End point: Reproduction Exposure time: 21 Days GLP: no Toxicity to microorganisms: EC10 (Pseudomonas putida): 44,6 mg/l End point: Growth rate Exposure time: 18 h Method: DIN 38 412 Part 8

Persistence and degradability

Biodegradability : Result: Readily biodegradable. Biodegradation: > 90 % Exposure time: 25 d Method: OECD Test Guideline 301B GLP: yes

Bioaccumulative potential

maleic anhydride: Bioaccumulation : Remarks: Does not bioaccumulate. Partition coefficient: n-octanol/water : log Pow: -2,61 (67,6 °F / 19,8 °C) pH: 4 - 9 Method: OECD Test Guideline 107 GLP: yes

Mobility in soil

Components: maleic anhydride: Distribution among environmental compartments : Koc: 6,314, log Koc: 0,8

Results of PBT and vPvB assessment

This substance is not considered to be persistent, bioaccumulating and toxic (PBT). This substance is not considered to be very persistent and very bioaccumulating (vPvB).

maleic anhydride is not considered to be PBT or vPvB.

Other adverse effects

The product is practically insoluble in water. In view of its consistency and insolubility in water, no ecological problems are to be expected if the product is properly handled. This product is not readily biodegradable.

The product is practically insoluble in water and not readily biodegradable; no ecological problems are expected if handled properly.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

The generation of waste should be avoided or minimized wherever possible.

Disposal

Waste disposal should be in accordance with existing federal, state, provincial and/or local environmental controls.

Waste Codes

Not applicable If discarded in its purchased form, this product would not be a hazardous waste either by listing or by characteristic. RCRA
14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Keltan ® 1519R Maleic Anhydride grafted ethylene propylene rubber?

The signal word is no signal word.

What is the physical form of Keltan ® 1519R Maleic Anhydride grafted ethylene propylene rubber?

Keltan ® 1519R Maleic Anhydride grafted ethylene propylene rubber is a solid appearing as bales with amber color. It has rubber odor.

What is Keltan ® 1519R Maleic Anhydride grafted ethylene propylene rubber used for?

crude product for the production of technical rubber articles