Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Stonex 5I
- Product Code
- X111005
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- XCUM-VXPV-2WGS-YH0C
Identified Uses
Descaling products, Process Category [PROC]: 8, 10, 11
Manufacturers & Suppliers
KANDO Service GmbH
national supplier
Hartleitnerstraße 3, 4653 Eberstalell, Austria
+43 (0) 7241 213 79
Emergency Contacts
Vergiftungsinformationszentrale (VIZ)
01 406 43 43
24h
Vergiftungsinformationszentrale (VIZ)
01 406 68 98
Montag - Freitag: 8 bis 16 Uhr
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Hydrochloric acid EC: 231-595-7 | --- | 15 - 20% | Yes |
| Alkyl polyethoxilate | 68439-50-9 | 1 - 5% | Yes |
| Nonionic surfactants | --- | 5% | No |
| Fragrances | --- | --- | No |
Notes
Full text of H- and EUH-phrases: see section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Provide fresh air.
After contact with skin, wash immediately with plenty of water and soap. Take off contaminated clothing and wash it before reuse.
Rinse immediately carefully and thoroughly with eye-bath or water.
Rinse mouth immediately and drink 1 glass of of water. Do NOT induce vomiting.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray jet, alcohol resistant foam, Carbon dioxide, Extinguishing powder
Full water jet
Co-ordinate fire-fighting measures to the fire surroundings.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ventilate affected area.
Do not allow to enter into surface water or drains. Do not allow to enter into soil/subsoil.
Treat the recovered material as prescribed in the section on waste disposal. Collect in closed and suitable containers for disposal.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin, eyes and clothes. Do not mix with other chemicals. Use personal protection equipment. When using do not eat, drink, smoke, sniff. Do not breathe gas/fumes/vapour/spray. Use only in well-ventilated areas.
Keep container tightly closed.
Take off contaminated clothing. Wash hands before breaks and after work. When using do not eat, drink, smoke, sniff.
No special fire protection measures are necessary.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No information available.
Wear protective gloves. (EN374, Breakthrough time: >10 min). Suitable material: NBR (Nitrile rubber). Thickness of the glove material >= 0,1 mm. A list of suitable makes with detailed information on wearing time is available on request. Diluted application solutions <= 1%: Protective gloves may be dispensed with, provided equivalent protective measures are taken, taking into account increased skin exposure due to wet work (e.g. use of suitable skin protection ointments).
Wear eye protection/face protection. (EN166)
Use only in well-ventilated areas. In case of inadequate ventilation wear respiratory protection. (EN 14387, A1)
Wear suitable work clothing.
Section 6: Accidental Release Measures
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable under storage at normal ambient temperatures.
Corrosive to metals. Exothermic reaction with: Alkali (lye)
Corrosive to metals. Exothermic reaction with: Alkali (lye)
The product is stable under storage at normal ambient temperatures.
Corrosive to metals. Alkali (lye)
No known hazardous decomposition products.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of waste according to applicable legislation. Delivery to an approved waste disposal company.
Evidence for disposal must be provided.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1789
- Shipping Name
- HYDROCHLORIC ACID, SOLUTION
- Transport Class
- 8
- Packing Group
- III
223
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Stonex 5I?
The signal word is danger.
What is the physical form of Stonex 5I?
Stonex 5I is a liquid with light yellow color. It has perfumes, fragrances odor.
What is Stonex 5I used for?
Descaling products, Process Category [PROC]: 8, 10, 11
What are the hazard statements for Stonex 5I?
This substance has 3 hazard statements:
- H290: May be corrosive to metals.
- H314: Causes severe skin burns and eye damage.
- H335: May cause respiratory irritation.
What is the melting point of Stonex 5I?
The melting point is ≈ 0 °C and the boiling point is ≈ 100 °C.