Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Q-RIT 164
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Curing agent for epoxy resins.
Manufacturers & Suppliers
QR Polymers B.V.
manufacturer
Smederijstraat 2, NL-4814 DB Breda
+31 76 531 79 21
Emergency Contacts
Emergency Contact
+31 76 531 79 21
8:30 - 17:00
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 3-AMINOMETHYL-3,5,5-TRIMETHYLCYCLOHEXYLAMINE EC: 220-666-8 | 2855-13-2 | 50 - 75% | Yes |
| POLYETHYLENE POLYAMINE, PENTAETHYLENEHEXAMINE FRACTION EC: 701-266-7 | --- | 25 - 50% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air in case of accidental inhalation of vapours.
Symptoms: No data available.
Remove all contaminated clothes and footwear immediately unless stuck to skin. Drench the affected skin with running water for 10 minutes or longer if substance is still on skin. Consult a doctor.
Symptoms: No data available.
Bathe the eye with running water for 15 minutes. Consult a doctor.
Symptoms: No data available.
Do not induce vomiting. Wash out mouth with water. If conscious, give half a litre of water to drink immediately. If unconscious, check for breathing and apply artificial respiration if necessary. If unconscious and breathing is OK, place in the recovery position. Consult a doctor.
Symptoms: No data available.
Immediate Medical Attention
Show this safety data sheet to the doctor in attendance.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray. Water fog. Dry chemical powder. Alcohol or polymer foam. Carbon dioxide.
Corrosive. In combustion emits toxic fumes of carbon dioxide / carbon monoxide. In combustion emits toxic fumes of nitrogen oxides.
Use water spray to cool containers.
Firefighter Protection
Wear protective clothing to prevent contact with skin and eyes. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Turn leaking containers leak-side up to prevent the escape of liquid.
Do not discharge into drains or rivers. Contain the spillage using bunding.
Absorb into dry earth or sand. Wash the spillage site with large amounts of water. Transfer to a closable, labelled salvage container for disposal by an appropriate method.
Materials: dry earth or sand
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure there is sufficient ventilation of the area. Do not handle in a confined space. Avoid the formation or spread of mists in the air. Avoid direct contact with the substance.
Store in a cool, well ventilated area. Keep away from direct sunlight. Avoid incompatible materials and conditions - see section 10 of SDS.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure there is sufficient ventilation of the area.
PVC gloves. Butyl gloves. Nitrile gloves. Rubber gloves. Gloves (alkali-resistant). Breakthrough time of the glove material > 8 hours.
Safety glasses with side-shields.
Self-contained breathing apparatus must be available in case of emergency.
Protective clothing.
Refer to specific Member State legislation for requirements under Community environmental legislation. Ensure all engineering measures mentioned in section 7 of SDS are in place. Prevent from entering in public sewers or the immediate environment.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Stable under recommended transport or storage conditions.
Hazardous reactions will not occur under normal transport or storage conditions.
Direct sunlight. Heat.
Strong acids. Strong oxidising agents. Metals.
In combustion emits toxic fumes of carbon dioxide / carbon monoxide. In combustion emits toxic fumes of nitrogen oxides.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Transfer to a suitable container and arrange for collection by specialised disposal company.
Transfer to a suitable container and arrange for collection by specialised disposal company.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN2735
- Shipping Name
- POLYAMINES, LIQUID, CORROSIVE, N.O.S. (ISOPHORONEDIAMINE; PENTAETHYLENEHEXAMINE)
- Transport Class
- 8
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Q-RIT 164?
The signal word is danger.
What is the physical form of Q-RIT 164?
Q-RIT 164 is a liquid with yellow color. It has aminic odor.
What is Q-RIT 164 used for?
Curing agent for epoxy resins.
What are the hazard statements for Q-RIT 164?
This substance has 5 hazard statements:
- H302: Harmful if swallowed or in contact with skin.
- H314: Causes severe skin burns and eye damage.
- H317: May cause an allergic skin reaction.
- H400: Very toxic to aquatic life.
- H410: Very toxic to aquatic life with long lasting effects.
What is the melting point of Q-RIT 164?
The melting point is No data available. and the boiling point is >250°C.