Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Lithium ion Rechargeable Battery Pack
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Dynapack International Technology Corporation
manufacturer
13F, No. 188, Wenhe Road, Guishan District, Taoyuan City, 333, Taiwan
886-3-3963399
http://www.dynapack.com.tw
Dynapack electronics Technology (Suzhou) Co. Ltd
manufacturer
No.8 Hua-Gang Road, Wujiang Economic and Technological Development Zone, Suzhou city, Jiang Su. PRC ZIP: 215200
86-512-63408688
Emergency Contacts
Emergency Contact
1+800-424-9300
Emergency Contact
1+703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Battery Constituents in Percentage; Lithium ion Battery Composition (%)
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Lead (Pb) | --- | 0.0001 - 0.002% | No |
| Zinc (Zn) | --- | 0.001 - 0.004% | No |
| Lithium (Li) | --- | 2 - 5.5% | No |
| Nickel (Ni) | --- | 1 - 5% | No |
| Iron (Fe) | --- | 0.001 - 0.05% | No |
| Manganese (Mn) | --- | 0.0001 - 2% | No |
| Cobalt (Co) | --- | 15 - 30% | No |
| Cadmium (Cd) | --- | --- | No |
| Plastic | --- | 5 - 10% | No |
| Other Material or Metals | --- | 60 - 75% | No |
| Aluminum | 7429-90-5 | 2 - 10% | No |
| Metal Oxide (proprietary) | 12190-79-3 | 20 - 50% | No |
| Polyvinylidene fluoride (PVDF) | 24937-79-9 | 5% | No |
| Copper | 7440-50-8 | 2 - 10% | No |
| Diethyl Carbonate | 105-58-8 | 15% | No |
| Electrolyte (proprietary) | --- | 10 - 20% | No |
Notes
CAS number: Not specified (A-1 and A-2): A-1. Cases: Plastic or Metal Not dangerous A-2. Printed Circuit Board Assembly Not dangerous
First Aid Measures
Emergency procedures for chemical exposure incidents
Leave area immediately and seek medical attention.
Wash area thoroughly with soap and water and seek medical attention.
Rinse eyes with water for 15 minutes and seek medical attention.
Drink milk/water and induce vomiting; seek medical attention
Immediate Medical Attention
Seek medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing media suitable for the materials that are burning. Use metal fire extinction powder or dry sand if only few cells are involved.
Firefighter Protection
Use NIOSH/MSHA approved full-face self-contained breathing apparatus (SCBA) with full protective gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
On Land: Place material into suitable containers and call local fire/police department. In water: If possible. Remove from water and call local fire/police department
Related Products
Similar products with comparable safety profiles
Lithium-Ion Rechargeable Battery Pack
---
Lithium ion Rechargeable Battery
---
Lithium-Ion battery pack
---
Lithium-Ion Rechargeable Battery Pack BL1820B
---
Lithium-Ion Rechargeable Battery Pack BL1820B
---
Lithium ion rechargeable battery cell
---
Lithium ion rechargeable battery cell
---
MS Lithium Rechargeable Battery
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not expose the battery to excessive physical shock or vibration. Short-circuiting should be avoided. To minimize risk of short-circuiting, the protective case supplied with the battery should be used to cover the terminals when transporting or storing the battery. Do not disassemble or deform the battery. Should an individual cell within a battery become ruptured, do not allow contact with water.
The lithium ion battery should be between 25% and 75% of full charge when stored for a long period of time. Store in a cool, dry, well ventilated area.
Do not expose the battery to open flames.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Keep away from heat and open flame. Store in a cool dry place.
Not required for handling of battery
Not required beyond safety practices of employer.
Not required during normal operations. SCBA required in the event of a fire.
Steel toed shoes recommended for large container handling.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Avoid exposure to heat and open flame. Do not puncture, crush or incinerate.
None during normal operation. Avoid exposure to heat, open flame, and corrosives.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Do not throw out a used battery. Recycle it through the recycling company.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3480, 3481
- Shipping Name
- Lithium ion batteries
- Transport Class
- 9
Lithium ion batteries only transport by air in accordance with PI965 at a state of charge (SOC) not to exceed 30 percent of rated design capacity.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Lithium ion Rechargeable Battery Pack?
The signal word is no signal word.
What is the physical form of Lithium ion Rechargeable Battery Pack?
Lithium ion Rechargeable Battery Pack is a solid .