Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Marine Safety Light Systems RL6
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
DANIAMANT LIMITED
manufacturer
Unit 3, The Admiral Park, Airport Service Road, Portsmouth, Hants. PO3 5RQ UK
+44 (0) 23 9267 5100
Emergency Contacts
CHEMTREC
00 1 703 527 3887
CHEMTREC
800 424 9300
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Lithium-Aluminium Alloy (Li-Al) EC: 231-102-5 | 7439-93-2 | 4 - 6% | Yes |
| Iron Disulfide (FeS₂) EC: 215-167-7 | 1309-36-0 | 25 - 40% | Yes |
| Propylene Carbonate (PC) EC: 203-572-1 | 108-32-7 | 5% | Yes |
| 1,2 – Dimethoxyethane (DME) EC: 203-794-9 | 110-71-4 | 5% | Yes |
| 1,3 – Dioxolane (DOL) EC: 211-463-5 | 646-06-0 | 10% | Yes |
| Lithium Perchlorate EC: 232-237-2 | 7791-03-9 | 1% | Yes |
| Graphite EC: 231-955-3 | 7782-42-5 | 1 - 3% | Yes |
| Stainless Steel (Fe) EC: 231-096-4 | 7439-89-6 | 30 - 40% | Yes |
| Aluminium (Al) EC: 231-072-3 | 7429-90-5 | 2 - 5% | Yes |
| Carbon Black EC: 215-609-9 | 1333-86-4 | 1 - 2% | Yes |
| Polypropylene EC: 618-352-4 | 9003-07-0 | 2 - 5% | Yes |
| Adhesive CMC | 9085-26-1 | 0.1 - 2% | Yes |
| Adhesive SBR EC: 618-370-2 | 9003-55-8 | 0.1 - 2% | Yes |
Reference: Sax's dangerous properties of industrial materials. NOTE: This product does not contain asbestos.
Notes
Reference: Sax's dangerous properties of industrial materials. NOTE: This product does not contain asbestos.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air.
Symptoms: Contents may be irritating to respiratory passages.
Remove any contaminated clothing and flush exposed skin with copious amounts of running water for at least 15 minutes.
Flush thoroughly with copious amounts of running water for 30 minutes.
Rinse the mouth and surrounding area with tepid water for at least 15 minutes.
Symptoms: Mouth area irritation or burning.
Immediate Medical Attention
Seek immediate medical attention for eye contact. If irritation, injury or pain persists after skin contact, seek medical attention. If irritation persists after inhalation, seek medical attention. Get medical attention immediately for ingestion to rule out the involvement of the gastrointestinal tract.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use dry chemical, alcohol foam, water or carbon dioxide as appropriate for the surrounding fire. For incipient fires, carbon dioxide extinguishers are more effective than water.
Batteries may burst and release hazardous decomposition products when exposed to a fire situation.
Fire fighters should wear positive pressure self-contained breathing apparatus and full protective clothing. Fight fire from a distance or protected area. Cool fire exposed batteries to prevent rupture. Use caution when handling fire-exposed containers (batteries may explode in heat of fire).
Firefighter Protection
Fire fighters should wear positive pressure self-contained breathing apparatus and full protective clothing. Fight fire from a distance or protected area. Cool fire exposed batteries to prevent rupture. Use caution when handling fire-exposed containers (batteries may explode in heat of fire).
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Notify safety personnel of large spills. Evacuate the area and allow the vapours to dissipate. Increase ventilation. Carefully collect batteries and place in an appropriate container for disposal. Remove spilled liquid with absorbent and contain for disposal.
Notify safety personnel of large spills.
Carefully collect batteries and place in an appropriate container for disposal. Remove spilled liquid with absorbent and contain for disposal.
Materials: absorbent
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid mechanical or electrical abuse. DO NOT short circuit or install incorrectly. Batteries may explode pyrolize or vent if disassembled, crushed, recharged or exposed to high temperatures. Install in accordance with equipment instructions.
Store batteries in a dry place at normal room temperature.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No special ventilation is needed for normal use.
Use butyl rubber gloves when handling leaking batteries.
None required for normal use. Wear safety goggles when handling leaking batteries.
None required for normal use.
None required for normal use.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
This product is stable.
Hazardous materials are housed within a hermetically sealed unit, under normal conditions this unit is Non-Hazardous.
Will not occur.
Do not heat, crush, disassemble, short circuit or recharge.
Contents are incompatible with strong oxidizing agents and acids.
Thermal decomposition may produce hazardous fumes of lithium; hydrofluoric acid, oxides of carbon and sulphur and other toxic by-products. Iron disulphide will react with oxidizers to form sulphur dioxide and with acids to form hydrogen sulphide.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.1 Toxicity
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of in accordance with appropriate local regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3091
- Shipping Name
- Lithium Metal Batteries Contained in Equipment
- Transport Class
- 9
P903
P903, Special Provision 230
970, Section I
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Risk Phrases: R8 (Contact with combustible material may cause fire), R11 (Highly flammable), R14/15 (Reacts violently with water liberating extremely flammable gasses), R17 (Spontaneously flammable in air), R19 (May form explosive peroxides), R20 (Harmful by inhalation), R22 (Harmful if swallowed), R34 (Causes burns), R36/37/38 (Irritating to eyes, respiratory system and skin), R41 (Risk of serious damage to the eyes). Safety Phrases: S1/2 (Keep locked up and out of the reach of children), S8 (Keep away from moisture), S16 (Keep away from sources of ignition – no smoking), S17 (Keep away from combustible material), S24/25 (When using do not eat drink or smoke), S26/27 (In case of contact with eyes, rinse immediately with plenty of water), S29 (Do not empty into drains), S33 (Take precautionary measures against static discharges), S36 (Wear suitable protective clothing), S37 (Wear suitable gloves), S38 (In case of insufficient ventilation wear suitable respiratory equipment), S43 (In case of fire, see fire fighting precautions), S45 (In case of incident, seek medical attention).
Risk Phrases: R8 (Contact with combustible material may cause fire), R11 (Highly flammable), R14/15 (Reacts violently with water liberating extremely flammable gasses), R17 (Spontaneously flammable in air), R19 (May form explosive peroxides), R20 (Harmful by inhalation), R22 (Harmful if swallowed), R34 (Causes burns), R36/37/38 (Irritating to eyes, respiratory system and skin), R41 (Risk of serious damage to the eyes). Safety Phrases: S1/2 (Keep locked up and out of the reach of children), S8 (Keep away from moisture), S16 (Keep away from sources of ignition – no smoking), S17 (Keep away from combustible material), S24/25 (When using do not eat drink or smoke), S26/27 (In case of contact with eyes, rinse immediately with plenty of water), S29 (Do not empty into drains), S33 (Take precautionary measures against static discharges), S36 (Wear suitable protective clothing), S37 (Wear suitable gloves), S38 (In case of insufficient ventilation wear suitable respiratory equipment), S43 (In case of fire, see fire fighting precautions), S45 (In case of incident, seek medical attention).
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Marine Safety Light Systems RL6?
The signal word is warning.
What is the solubility of Marine Safety Light Systems RL6?
Not applicable unless individual components exposed.
What are the hazard statements for Marine Safety Light Systems RL6?
This substance has 8 hazard statements:
- H303: Swallowing is not anticipated for larger batteries due to battery size. Irritation to the internal/external mouth areas may occur following exposure to a leaking battery.
- H315: Contact with battery contents may cause severe irritation.
- H316: Contact with battery contents may cause irritation.
- H335: Inhalation of vapours or fumes released due to heat or a large number of leaking batteries may cause respiratory and eye irritation. High concentration may cause central nervous system effects including headache, dizziness and nausea.
- CAUTION: Battery can explode or leak if heated, disassembled, shorted, recharged, exposed to fire or high temperature or inserted incorrectly.
- Under certain misuse conditions and by abusively opening the battery, exposed lithium can react with water or moisture in the air causing potential thermal burns or fire.
- Liquid released from damaged battery is flammable and may present a fire hazard.
- The chemicals and metals in this product are contained in a sealed can. Exposure to the contents will not occur unless the battery leaks, is exposed to high temperatures or is mechanically, physically, or electrically abused.