NextSDS Logo
Safety Data Sheet EN

RSL3

CAS 1219810-16-8

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
RSL3
Product Code
HY-100218A

Regulatory Identifiers

CAS Number
1219810-16-8 Check regulations →

Identified Uses

Laboratory chemicals, manufacture of substances.

Manufacturers & Suppliers

M

MedChemExpress USA

manufacturer

1 Deer Park Dr, Suite F, Monmouth Junction, NJ 08852, USA

609-228-6898

Emergency Contacts

Emergency Contact

609-228-6898

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Acute Tox. Cat. 4 H302
Skin Irrit. Cat. 2 H315
Eye Irrit. Cat. 2A H319
STOT SE Cat. 3 H335

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H302 Harmful if swallowed
H315 Causes skin irritation
H319 Causes serious eye irritation
H335 May cause respiratory irritation

Precautionary Statements

P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P264 Wash hands thoroughly after handling
P270 Do not eat, drink or smoke when using this product.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P302 + P352 IF ON SKIN: Wash with plenty of soap and water.
P304 + P340 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P330 Rinse mouth.
P362 + P364 Take off contaminated clothing and wash it before reuse.
P403 + P233 Store in a well-ventilated place. Keep container tightly closed.
P405 Store locked up.
P501 Dispose of contents/container to in accordance with local regulation.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type substance
Chemical Name CAS Number Concentration Hazardous
(1S,3R)-RSL3 1219810-16-8 --- No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove person to fresh air and keep comfortable for breathing. Call a poison centre or physician if you feel unwell. If breathing is irregular or stopped, administer artificial respiration.

Skin contact

Where Diphoterine is not available, wash immediately with plenty of water and soap. Remove contaminated clothing immediately. Immediately seek medical attention.

Eye contact

Where Diphoterine is not available, rinse eyes with copious amounts of water for at least 20 minutes. Protect uninjured eye. Remove contact lenses if present and easy to do. Continue rinsing and seek immediate medical attention.

Ingestion

If accidentally swallowed rinse the mouth with plenty of water (only if the person is conscious) and obtain immediate medical attention. Do not induce vomiting.

Immediate Medical Attention

Seek immediate medical attention for eye contact, skin contact, and ingestion.

Medical Treatment

No special immediate treatment required

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Carbon dioxide, alcohol resistant foam or dry chemical powder., Use water to extinguish fire.

Unsuitable media

No known unsuitable media.

Specific hazards

Thermal decomposition can lead to release of irritating gases and vapours.

Instructions

Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. Remove undamaged containers from fire area if it is safe to do so.

Firefighter Protection

Use personal protective equipment.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Keep personnel away from spill/leak.

Environmental

Prevent further leakage if safe to do so. Discharge into the environment must be avoided.

Cleanup methods

Absorb the spilled material with an inert absorbent before transferring into an airtight container.

Materials: sand, silica gel, rag, vermiculite

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Wear appropriate personal protective equipment. Use only under a chemical fume hood. Keep away from heat/sparks/open flame/hot surfaces. Take measures to prevent the build-up of electrostatic charge. Ensure adequate exhaust ventilation, especially if dust, aerosol or fumes will be generated. Avoid contact with skin, eyes and clothing.

Storage

Keep container tightly sealed in cool, well-ventilated area. Keep away from direct sunlight and sources of ignition. Recommended storage temperature: 4°C, sealed storage, away from moisture. In solvent: -80°C, 2 years; -20°C, 1 year (sealed storage, away from moisture). Shipping at room temperature if less than 2 weeks.

Hygiene

Handle in accordance with good industrial hygiene and safety practice. Wash hands before and after use. Do not eat, drink or smoke when using this product. Remove and wash contaminated clothing before re-use.

Fire prevention

Keep away from heat/sparks/open flame/hot surfaces. Take measures to prevent the build-up of electrostatic charge.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Use only under a chemical fume hood ensuring adequate ventilation, especially in confined areas. Use explosion-proof electrical/ventilating/lighting/equipment. Ensure that eyewash stations and safety showers are close to the workstation location.

Hands

Protective gloves.

Eyes

Safety goggles with side-shields.

Respiratory

Suitable respirator.

Skin/Body

Impervious clothing.

Environmental

Avoid discharge into the environment, see section 6.2.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Solid
Physical State Data
solid
State Under Standard Conditions
---
Appearance
Solid
Colour
---
Colour Intensity
---
Form
---
Odor
---
Odor Threshold
---
Ph
---
Melting Point
---
Boiling Point
---
Flash Point
---
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
---
Vapor Density
---
Relative Density
1.368g/cm3
Bulk Density
---
Density
---
Flammability
---
Upper Explosive Limit
---
Lower Explosive Limit
---
Explosive Limits
---
Auto Ignition Temperature
---
Decomposition Temperature
---
Solubility
---
Partition Coefficient
---
Solubility In Water
---
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended storage conditions.

Reactivity

No data available.

Hazardous reactions

None under normal storage conditions.

Avoid

Heat, sparks, open flames, sources of ignition. Exposure to moisture.

Incompatible

Strong acids/alkalis, strong oxidising/reducing agents.

Decomposition

Under fire conditions, may decompose and emit toxic fumes. Other decomposition products - no data available.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for RSL3?

The signal word is warning.

What is the physical form of RSL3?

RSL3 is a solid appearing as solid .

What is RSL3 used for?

Laboratory chemicals, manufacture of substances.

What are the hazard statements for RSL3?

This substance has 4 hazard statements:

  • H302: Harmful if swallowed
  • H315: Causes skin irritation
  • H319: Causes serious eye irritation
  • H335: May cause respiratory irritation