NextSDS Logo
TI

TIP TOP SOLUTION HL-TNL4

DANGER Liquid SDS/MSDS
Chemical Identity

Product Identification & Regulatory Data

Official chemical identifiers, CAS numbers, and regulatory compliance information

Basic Product Information

Product Name
TIP TOP SOLUTION HL-TNL4
Product Form
Mixture
Product Code
538 1162

Regulatory Identifiers

CAS Number
N/A

Chemical Abstracts Service registry number - unique identifier for chemical substances

Uses Information

Identified Uses
Adhesive

Overview

TIP TOP SOLUTION HL-TNL4 is a liquid. substance commonly used adhesive.

Manage Your Safety Data Sheets

Organize and access your chemical safety data with ease.

Safety Classification

GHS Hazard Classification & Safety Warnings

Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications

Classification Status

Classified

Signal Word

danger (Danger)

Hazard Classifications

Flam. Liq. Category 2 H225
Skin Irrit. Category 2 H315
STOT SE Category 3 H336
Aquatic Chronic Category 2 H411

GHS Hazard Pictograms & Safety Symbols

GHS02 GHS Hazard Pictogram: Flammable hazard - Fire risk materials including gases, liquids, and solids

GHS02

GHS07 GHS Hazard Pictogram: Health hazard warning - Materials harmful to health including irritants and sensitizers

GHS07

GHS09 GHS Hazard Pictogram: Environmental hazard - Materials toxic to aquatic life and environment

GHS09

GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions

Hazard Statements

  • H225: Highly flammable liquid and vapour
  • H315: Causes skin irritation
  • H336: May cause drowsiness or dizziness
  • H411: Toxic to aquatic life with long lasting effects

Precautionary Statements

  • P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
  • P240: Ground and bond container and receiving equipment.
  • P261: Avoid breathing vapours.
  • P264: Wash hands thoroughly after handling.
  • P271: Use only outdoors or in a well-ventilated area.
  • P273: Avoid release to the environment.
  • P280: Wear eye protection, face protection, protective gloves, protective clothing.
  • P303 + P361 + P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water .
  • P304 + P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.
  • P312: Call a doctor, a POISON CENTER if you feel unwell.
  • P332 + P313: If skin irritation occurs: Get medical attention.
  • P391: Collect spillage.
  • P403 + P233: Store in a well-ventilated place. Keep container tightly closed.
  • P403 + P235: Store in a well-ventilated place. Keep cool.
  • P405: Store locked up.
  • P501: Dispose of contents and container to an approved waste disposal plant.
Supply Chain

Manufacturers & Suppliers

Authorized suppliers, manufacturers, and distribution network information

REMA TIP TOP AG

manufacturer

65 Gruber Strasse Poing 85586 Germany

DE

+49 (0) 8121 / 707 - 100

REMA TIP TOP Australia Pty Ltd. company logo - Safety Data Sheet supplier organization

REMA TIP TOP Australia Pty Ltd.

importer

3/20 Worth Street Chullora NSW 2190 Australia

AU

+61 2 8755 8400

Emergency

24/7 Emergency Response

Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies

Infotrac/GBK GmbH

+61-280735031

AU

ID: 93591

Composition

Chemical Composition & Hazardous Ingredients

Detailed component analysis, concentration ranges, and hazardous substance identification

Chemical Components & Hazardous Substances

Chemical Name CAS Number Concentration Hazardous
Petroleum spirit 40-60
EC: 927-510-4
64742-49-0 60% Hazardous
Petroleum spirit 40-60
EC: 927-510-4
64742-49-0 20% Hazardous
carbon black
EC: 215-609-9
1333-86-4 3-5% Non-hazardous
Silicon dioxide E 551
EC: 231-545-4
7631-86-9 1-3% Non-hazardous
zinc oxide 1314-13-2 2.5% Hazardous
rosin
EC: 232-475-7
8050-09-7 1% Hazardous
Resorcinol
EC: 203-585-2
108-46-3 0.3% Hazardous
methenamine; hexamethyleentetramine
EC: 202-905-8
100-97-0 1% Hazardous
N-phenyl-1-naphthylamine
EC: 201-983-0
90-30-2 1% Hazardous
N-(1,3-Dimethylbutyl)-N'-phenyl-p-phenylendiamine
EC: 212-344-0
793-24-8 0.3% Hazardous
Other substances (not contributing to the classification of this product) N/A Not specified Non-hazardous

Composition Notes

Preparation solved in petroleum spirit.

First Aid

Emergency First Aid Measures

Critical first aid procedures for chemical exposure incidents and medical emergencies

Inhalation Exposure

Move to fresh air in case of accidental inhalation of vapours or decomposition products. In the event of persistent symptoms receive medical treatment.

Symptoms:

May cause drowsiness or dizziness.

Skin Contact

Gently wash with plenty of soap and water. Get medical advice if skin irritation persists.

Symptoms:

Causes skin irritation. May cause sensitisation of susceptible persons by skin contact.

Eye Contact

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Consult an eye specialist immediately.

Symptoms:

May cause slight irritation to eyes.

Ingestion/Swallowing

Rinse mouth with water, do not induce vomiting, call a doctor. Drink plenty of water. Do not give an unconscious person anything to drink. Call a poison center or a doctor if you feel unwell.

Symptoms:

Risk of aspiration.

Immediate Medical Attention Required

In the event of persistent symptoms receive medical treatment. Consult an eye specialist immediately. Get medical advice if skin irritation persists. Call a doctor. Call a poison center or a doctor if you feel unwell.

Medical Treatment

Treat symptomatically.

Alternatives

Related Chemical Substances & Alternative Products

Similar chemicals with comparable safety profiles and industrial applications

Section 9

Technical Specifications & Material Properties

Physical state, chemical properties, melting point, boiling point, and material characteristics

Ph
No data available
Kinematic Viscosity
> 20.5 mm2/s @ 40
Solubility
Water: Not miscible, 20
Upper Explosive Limit
No data available
Solidification Point
Not available
Vapor Pressure
100 - 200 hPa 20
Softening Point
Not available
Partition Coefficient
No data available
Relative Density
No data available
Explosive Limits
Not available
Relative Evaporation Rate
No data available
Physical State
Liquid
Critical Property
Physical State Data
liquid
Form
Not available
Colour
Black
Boiling Point
60-95
Critical Property
Flammability
No data available
Solubility In Water
Water: Not miscible, 20
Odor
Hydrocarbon-like
Solubility In Fat
No data available
Dynamic Viscosity
< 1200 mPas
Evaporation Rate
Not available
Vapor Density
Not available
Molecular Weight
Not available
Auto Ignition Temperature
No data available
Odor Threshold
No data available
Flash Point
< - 25 Naphtha (petroleum)
Critical Property
Cloud Point
Not available
Density
< 1 g/cm3
Critical Property
Decomposition Temperature
Not available
Voc Content
< 80 %
Melting Point
< - 50
Critical Property
Metal Corrosion
Not available
Properties Status
Not available
Freezing Point
Not available
Colour Intensity
Not available
State Under Standard Conditions
Not available
Lower Explosive Limit
No data available
Appearance
Liquid.
Crystallisation Point
Not available
Bulk Density
Not available
Section 8

Exposure Controls & Personal Protective Equipment

Occupational exposure limits, engineering controls, and required safety equipment

Engineering Controls

Ensure good ventilation of the work station.

Hand Protection

Recommendation refers exclusively to chemical compatibility and lab test conforming to EN 374 carried out under lab conditions. Requirements can vary as a function of the use. Therefore it is necessary to adhere additionally to the recommendations given by the manufacturer of protective gloves. Type: Chemically resistant protective gloves, Material: Nitrile rubber (NBR), Permeation: 6 (> 480 minutes), Thickness: 0,4 mm, Standard: EN ISO 374-1

Eye Protection

Type: Protective goggles (EN 166), Field of application: Liquid splashes may occur, Standard: EN 166

Respiratory Protection

In case of insufficient ventilation, wear suitable respiratory equipment. Device: Respiratory protective device with a gas filter, Filter type: Type A - High-boiling (>65 ) organic compounds, Condition: In case of inadequate ventilation wear, Standard: EN 14387

Skin/Body Protection

Type: Chemical resistant apron, Standard: EN 467

Environmental Exposure Controls

Avoid release to the environment.

Section 14

Transportation & Shipping Information

UN numbers, shipping names, transport classes, and regulatory transport requirements

UN Number

1133

Proper Shipping Name

ADHESIVES

Transport Hazard Class

3

Packing Group

II

ADR Transport Precautions

Specific storage requirement Shock sensitivity

IMDG Maritime Transport Precautions

: No data available

FAQ

Chemical Safety FAQ & Common Questions

Most frequently asked questions about safety, handling, storage, and regulatory compliance

What is the hazard signal word for TIP TOP SOLUTION HL-TNL4?

The signal word for this substance is "danger".

What is the physical form of TIP TOP SOLUTION HL-TNL4?

TIP TOP SOLUTION HL-TNL4 is a liquid appearing as liquid. with black color. It has hydrocarbon-like odor.

What is the solubility of TIP TOP SOLUTION HL-TNL4?

Water: Not miscible, 20

What is TIP TOP SOLUTION HL-TNL4 used for?

Adhesive

What are the hazard statements for TIP TOP SOLUTION HL-TNL4?

This substance has 4 hazard statements: H225: Highly flammable liquid and vapour H315: Causes skin irritation H336: May cause drowsiness or dizziness H411: Toxic to aquatic life with long lasting effects

What is the melting point of TIP TOP SOLUTION HL-TNL4?

The melting point is < - 50 and the boiling point is 60-95.