Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- CL-THTN 090
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Cleaner; Reserved for industrial and professional use.
Manufacturers & Suppliers
REA Elektronik GmbH
manufacturer
Teichwiesenstr. 1, 64367 Mühltal-Waschenbach
+49 (0) 6154 / 638-0
http://www.rea-jet.de
Emergency Contacts
Poison Information Center Mainz
+49 (0) 6131 – 19240
DE, EN
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS08
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Solvent mixture
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Hydrocarbons, C7-C9, n-alkanes, isoalkanes, cyclics | --- | 50 - 100% | Yes |
| Isopropyl alcohol EC: 200-661-7 | 67-63-0 | 10% | Yes |
Information about Hydrocarbons, C7-C9, n-alkanes, isoalkanes, cyclics: aromatic contents: < 0.1%
First Aid Measures
Emergency procedures for chemical exposure incidents
If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing. Seek medical treatment in case of troubles.
Immediately clean with water and soap followed by thorough rinsing. In case of skin reactions, consult a physician.
Symptoms: Repeated exposure may cause skin dryness or cracking.
Immediately flush eyes with plenty of flowing water for 10 to 15 minutes holding eyelids apart. Remove contact lenses, if present and easy to do. Continue rinsing. Subsequently consult an ophthalmologist.
Rinse mouth immediately and drink plenty of water. Never give anything by mouth to an unconscious person. Do not induce vomiting.
Immediate Medical Attention
Immediately get medical attention (in case of swallowing or vomiting danger of penetration into the lungs).
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray jet, extinguishing powder, carbon dioxide. In case of major fire and large quantities: water spray jet, alcohol resistant foam.
Full water jet
Highly flammable liquid and vapour. With air, vapours form potentially explosive mixtures, which are heavier than air. Vapours may proceed on the ground over great distances and cause fire and backflashes. May form dangerous gases and vapours in case of fire. Heating will lead to pressure increase: Danger of bursting and explosion.
Move undamaged containers from immediate hazard area if it can be done safely. In case of major fire and large quantities: Evacuate area. Fight fire remotely due to the risk of explosion.
Firefighter Protection
Wear self-contained positive pressure breathing apparatus and full firefighting protective clothing. Cool endangered containers with water jetspray.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid breathing mist/vapours/spray. Avoid contact with the substance. Eliminate all ignition sources if safe to do so. If possible, eliminate leakage. Provide adequate ventilation. Wear appropriate protective equipment. Keep unprotected people away. Take off immediately all contaminated clothing and wash it before reuse. Cordon off downwind area at risk and warn inhabitants. Plug leak if safely possible.
Collect mechanically (use only explosion-proof equipment when pumping out).
Do not allow to enter into ground-water, surface water or drains.
Collect it for disposal in appropriate containers in accordance with the local regulations. Thoroughly clean surrounding area.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Provide adequate ventilation, and local exhaust as needed. Avoid breathing mist/vapours/spray. Do not get in eyes, on skin, or on clothing. Wear appropriate protective equipment.
Keep container tightly closed and in a well-ventilated place. Keep container dry. Keep only in the original container. Protect from heat and direct sunlight. Store containers in upright position.
Do not eat, drink or smoke when using this product. Wash hands thoroughly after handling. Take off immediately all contaminated clothing and wash it before reuse.
Keep away from sources of ignition - No smoking. Take action to prevent static discharges.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide for good ventilation or exhaust system or work with completely self-contained equipment. Explosion protection required.
Protective gloves according to EN 374. Glove material: Nitrile rubber, solvent resistant. Observe glove manufacturer's instructions concerning penetrability and breakthrough time.
Tightly sealed goggles according to EN 166.
Respiratory protection must be worn whenever the WEL levels have been exceeded. In case of inadequate ventilation wear respiratory protection. The filter class must be suitable for the maximum contaminant concentration (gas/vapour/aerosol/particulates) that may arise when handling the product. If the concentration is exceeded, self-contained breathing apparatus must be used. Recommendation: For short or minimal exposure: air purifying respirator (Use combination filter type A-P2 according to EN 14387.); for longer exposure: supplied air respirator.
Flame retardant, antistatic and chemical resistant protective clothing.
Do not allow to enter into ground-water, surface water or drains.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
Highly flammable liquid and vapour. Vapours can form explosive mixtures with air.
Heating will lead to pressure increase: Danger of bursting and explosion. Reacts violently with strong oxidizing agents.
Keep away from heat sources, sparks and open flames. Protect against direct sunlight.
Strong oxidizing agents, acids.
Thermal decomposition: At normal air pressure, the product may be distilled without decomposition.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Incinerate as hazardous waste according to applicable local, state, and federal regulations.
Incinerate as hazardous waste according to applicable local, state, and federal regulations. Do not dispose of with household waste.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1263
- Shipping Name
- Paint related material
- Transport Class
- 3
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Hazchem-Code: •3YE
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for CL-THTN 090?
The signal word is danger.
What is the physical form of CL-THTN 090?
CL-THTN 090 is a liquid appearing as physical state at 20 c and 101.3 kpa: liquid with colourless color. It has mild, similar to benzine odor.
What is CL-THTN 090 used for?
Cleaner; Reserved for industrial and professional use.
What are the hazard statements for CL-THTN 090?
This substance has 4 hazard statements:
- H225: Highly flammable liquid and vapour.
- H304: May be fatal if swallowed and enters airways.
- H336: May cause drowsiness or dizziness.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of CL-THTN 090?
The melting point is Not determined and the boiling point is Not determined.