NextSDS Logo
Safety Data Sheet EN

Kroon-Oil Coolant -38 Organic NF

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Kroon-Oil Coolant -38 Organic NF
Product Form
Mixture
Product Code
09.10.02

Regulatory Identifiers

CAS Number
N/A
UFI Code
2640-J9HG-K00P-E0QG

Identified Uses

Antifreeze and coolant

Uses advised against

No additional information available

Manufacturers & Suppliers

K

Kroon-Oil B.V.

manufacturer

Dollegoorweg 15, NL 7602 EC Almelo, Netherlands

0031 (0)546 81 81 65

Emergency Contacts

National Poisons Information Centre Beaumont Hospital

+353 1 809 2566

Healthcare professionals-24/7

National Poisons Information Centre Beaumont Hospital

+353 1 809 2166

public, 8am - 10pm, 7/7

National Poisons Information Service (Cardiff Centre) University Hospital Llandough

0344 892 0111

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Acute Tox. Cat. 4 H302
Skin Irrit. Cat. 2 H315
Eye Irrit. Cat. 2 H319
STOT RE Cat. 2 H373

GHS Pictograms

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H302 Harmful if swallowed.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H373 May cause damage to organs (kidneys) through prolonged or repeated exposure (if swallowed).

Precautionary Statements

P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P260 Do not breathe vapours, mist.
P270 Do not eat, drink or smoke when using this product.
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P314 Get medical advice/attention if you feel unwell.
P501 Dispose of contents/container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
1,2-ethanediol EC: 203-473-3 107-21-1 80% Yes
Potassium 3,5,5-trimethylhexanoate EC: 299-890-3 93918-10-6 2.5% Yes

Notes

The product has a bitter taste for safety reasons, in case it is swallowed accidentally

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove person to fresh air and keep comfortable for breathing.

Symptoms: Inhalation may affect the nervous system causing headache, possibly dizziness, nausea, weakness, loss of coordination and unconsciousness.

Skin contact

Remove contaminated clothes. Wash skin with plenty of water. If skin irritation occurs: Get medical advice/attention.

Symptoms: Irritation.

Eye contact

Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.

Symptoms: Eye irritation.

Ingestion

Rinse mouth. Do NOT induce vomiting. Get medical advice/attention.

Symptoms: Ingestion may cause nausea, vomiting and diarrhea.

Immediate Medical Attention

Get medical advice/attention.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray. Dry powder. Foam. Carbon dioxide.

Unsuitable media

Do not use a heavy water stream.

Specific hazards

Fire hazard : No fire hazard. Explosion hazard : No direct explosion hazard.

Instructions

Fight fire from safe distance and protected location. Do not enter fire area without proper protective equipment, including respiratory protection.

Firefighter Protection

Do not attempt to take action without suitable protective equipment. Self-contained breathing apparatus. Complete protective clothing.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Stop leak if safe to do so. Notify authorities if product enters sewers or public waters. Absorb spillage to prevent material damage. Ventilate spillage area. Do not breathe dust/fume/gas/mist/vapours/spray. Avoid contact with skin and eyes. Evacuate unnecessary personnel.

Environmental

Avoid release to the environment.

Cleanup methods

Take up liquid spill into absorbent material.

Materials: absorbent material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Ensure good ventilation of the work station. Do not breathe dust/fume/gas/mist/vapours/spray. Avoid contact with skin and eyes. Wear personal protective equipment.

Storage

Keep cool. Protect from sunlight.

Hygiene

Wash contaminated clothing before reuse. Do not eat, drink or smoke when using this product. Always wash hands after handling the product.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Ensure good ventilation of the work station.

Hands

Type: Reusable gloves, Material: Nitrile rubber (NBR), Permeation: 6 (> 480 minutes), Thickness: ≥0.35 mm, Standard: EN ISO 374

Eyes

Type: Safety glasses, Field of application: Droplet, Characteristics: clear, Standard: EN 166

Respiratory

In case of insufficient ventilation, wear suitable respiratory equipment

Skin/Body

Wear suitable protective clothing

Environmental

Avoid release to the environment.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Solidification Point
---
Auto Ignition Temperature
Not available
Dynamic Viscosity
---
Appearance
---
Softening Point
---
Physical State
Liquid
Colour
light yellow.
Decomposition Temperature
Not available
Solubility
Water: completely miscible
Boiling Point
100 – 197 °C
Vapor Pressure
2332 Pa (20°C)
Flash Point
111 °C Derived from flash point MEG (CAS: 107-21-1). Because of the presence of water, a flashpoint cannot be measured.
Kinematic Viscosity
1 mm²/s (40 °C) - ASTM D7042
Freezing Point
Not available
Evaporation Rate
---
Metal Corrosion
---
Explosive Limits
---
Relative Evaporation Rate
2500
Odor
odourless.
Crystallisation Point
---
State Under Standard Conditions
---
Molecular Weight
---
Flammability
Not applicable
Solubility In Water
completely miscible
Melting Point
Not applicable
Physical State Data
liquid
Partition Coefficient
Not available
Upper Explosive Limit
53 vol %
Colour Intensity
---
Odor Threshold
Not available
Properties Status
---
Relative Density
Not available
Solubility In Fat
---
Density
1,06 kg/m³ (15 °C) - ASTM D4052
Vapor Density
---
Bulk Density
---
Ph
8
Lower Explosive Limit
3,2 vol %
Cloud Point
---
Form
---
Voc Content
514,63 g/l
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions.

Reactivity

The product is non-reactive under normal conditions of use, storage and transport. Hydroscopic.

Hazardous reactions

No dangerous reactions known under normal conditions of use.

Avoid

None under recommended storage and handling conditions (see section 7).

Incompatible

No additional information available

Decomposition

Under normal conditions of storage and use, hazardous decomposition products should not be produced.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Dispose of contents/container in accordance with licensed collector's sorting instructions.

Disposal

Disposal must be done according to official regulations.

Waste Codes

16 01 14* antifreeze fluids containing dangerous substances EWC
HP5 Specific Target Organ Toxicity (STOT)/Aspiration Toxicity: waste which can cause specific target organ toxicity either from a single or repeated exposure, or which cause acute toxic effects following aspiration. national code
HP6 Acute Toxicity: waste which can cause acute toxic effects following oral or dermal administration, or inhalation exposure. national code
HP4 Irritant – skin irritation and eye damage: waste which on application can cause skin irritation or damage to the eye. national code
14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
Not regulated
Shipping Name
Not regulated
Transport Class
Not regulated
Packing Group
Not regulated
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Kroon-Oil Coolant -38 Organic NF?

The signal word is warning.

What is the physical form of Kroon-Oil Coolant -38 Organic NF?

Kroon-Oil Coolant -38 Organic NF is a liquid with light yellow. color. It has odourless. odor.

What is the solubility of Kroon-Oil Coolant -38 Organic NF?

Water: completely miscible

What is Kroon-Oil Coolant -38 Organic NF used for?

Antifreeze and coolant

What are the hazard statements for Kroon-Oil Coolant -38 Organic NF?

This substance has 4 hazard statements:

  • H302: Harmful if swallowed.
  • H315: Causes skin irritation.
  • H319: Causes serious eye irritation.
  • H373: May cause damage to organs (kidneys) through prolonged or repeated exposure (if swallowed).

What is the melting point of Kroon-Oil Coolant -38 Organic NF?

The melting point is Not applicable and the boiling point is 100 – 197 °C.