NextSDS Logo
Safety Data Sheet EN

Kroon-Oil Compound OGL

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Kroon-Oil Compound OGL
Product Form
Mixture
Product Code
07.30.01

Regulatory Identifiers

CAS Number
N/A
UFI Code
VF10-605A-G009-XN72

Identified Uses

Industrial use, Professional use, Lubricating agent

Uses advised against

No additional information available

Manufacturers & Suppliers

K

Kroon Oil BV B.V.

manufacturer

Dollegoorweg, 15, NL– 7602 EC Almelo, Netherlands

0031 (0)546 81 81 65

Emergency Contacts

National Poisons Information Centre, Beaumont Hospital

+353 1 809 2566

24/7

National Poisons Information Centre, Beaumont Hospital

+353 1 809 2166

8am - 10pm, 7/7

National Poisons Information Service (Cardiff Centre), University Hospital Llandough

0344 892 0111

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Aerosol Cat. 1 H222
STOT SE Cat. 3 H336
Asp. Tox. Cat. 1 H304
Aquatic Chronic Cat. 2 H411

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

GHS09 - Environmental hazard

GHS09

Hazard Statements

H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H336 May cause drowsiness or dizziness.
H411 Toxic to aquatic life with long lasting effects.

Precautionary Statements

P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P271 Use only outdoors or in a well-ventilated area.
P410 + P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
P501 Dispose of contents/container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Butane EC: 203-448-7 106-97-8 25 - 50% Yes
pentane EC: 203-692-4 109-66-0 10 - 25% Yes
Propane EC: 200-827-9 74-98-6 10 - 25% Yes
Hydrocarbons, C9-C11, n-alkanes, isoalkanes, cyclics, <2% aromatics EC: 919-857-5 64742-48-9 2.5 - 10% Yes
isobutane EC: 200-857-2 75-28-5 2.5 - 10% Yes
Hydrocarbons, C9, aromatics EC: 918-668-5 128601-23-0 2.5 - 10% Yes
Oleic acid, compound with (Z)-N-octadec-9-enylpropane-1,3-diamine (2:1) EC: 251-846-4 34140-91-5 0.1 - 1% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove person to fresh air and keep comfortable for breathing.

Symptoms: May cause drowsiness or dizziness.

Skin contact

Wash skin with plenty of water.

Symptoms: Repeated exposure may cause skin dryness or cracking.

Eye contact

Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.

Symptoms: Eye irritation.

Ingestion

Do not induce vomiting. Call a physician immediately.

Symptoms: Risk of lung oedema.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray. Dry powder. Foam. Carbon dioxide.

Unsuitable media

Do not use a heavy water stream.

Specific hazards

Extremely flammable aerosol. Combustible liquid. Pressurised container: May burst if heated.

Firefighter Protection

Do not attempt to take action without suitable protective equipment. Self-contained breathing apparatus. Complete protective clothing.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Ventilate spillage area. Avoid contact with skin and eyes. No open flames, no sparks, and no smoking. Avoid breathing mist, spray, vapours.

Environmental

Avoid release to the environment.

Cleanup methods

Mechanically recover the product.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Wear personal protective equipment. Avoid contact with skin and eyes. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray on an open flame or other ignition source. Do not pierce or burn, even after use. Use only outdoors or in a well-ventilated area. Avoid breathing mist, spray, vapours.

Storage

Protect from sunlight. Do not expose to temperatures exceeding 50 °C/ 122 °F. Store locked up. Store in a well-ventilated place. Keep container tightly closed. Keep cool.

Hygiene

Do not eat, drink or smoke when using this product. Always wash hands after handling the product.

Fire prevention

Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Ensure good ventilation of the work station.

Hands

Reusable gloves, Material: Nitrile rubber (NBR), Permeation: 6 (> 480 minutes), Thickness (mm): ≥0.35, Standard: EN ISO 374

Eyes

Safety glasses, Type: Safety glasses, Field of application: Droplet, Characteristics: clear, Standard: EN 166

Respiratory

In case of insufficient ventilation, wear suitable respiratory equipment

Skin/Body

Wear suitable protective clothing

Environmental

Avoid release to the environment.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid
Physical State Data
aerosol
State Under Standard Conditions
---
Appearance
Aerosols.
Colour
amber.
Colour Intensity
---
Form
---
Odor
characteristic.
Odor Threshold
Not available
Ph
substance/mixture is non-polar/aprotic
Melting Point
Not applicable
Boiling Point
-44,5 °C
Flash Point
-97 °C
Freezing Point
Not available
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
---
Vapor Density
---
Relative Density
Not available
Bulk Density
---
Density
0,654 g/cm³ at 20 °C
Flammability
Extremely flammable aerosol.
Upper Explosive Limit
10,9 vol %
Lower Explosive Limit
0,6 vol %
Explosive Limits
---
Auto Ignition Temperature
Not available
Decomposition Temperature
Not available
Solubility
Water: Insoluble / Slightly miscible
Partition Coefficient
Not available
Solubility In Water
---
Solubility In Fat
---
Molecular Weight
---
Voc Content
499 g/l
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
≤ 20,5 mm²/s (40°C)
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions.

Reactivity

Extremely flammable aerosol. Pressurised container: May burst if heated.

Hazardous reactions

No dangerous reactions known under normal conditions of use.

Avoid

Avoid contact with hot surfaces. Heat. No flames, no sparks. Eliminate all sources of ignition.

Incompatible

No additional information available

Decomposition

Under normal conditions of storage and use, hazardous decomposition products should not be produced.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1950
Shipping Name
AEROSOLS
Transport Class
2.1
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Kroon-Oil Compound OGL?

The signal word is danger.

What is the physical form of Kroon-Oil Compound OGL?

Kroon-Oil Compound OGL is a liquid appearing as aerosols. with amber. color. It has characteristic. odor.

What is the solubility of Kroon-Oil Compound OGL?

Water: Insoluble / Slightly miscible

What is Kroon-Oil Compound OGL used for?

Industrial use, Professional use, Lubricating agent

What are the hazard statements for Kroon-Oil Compound OGL?

This substance has 4 hazard statements:

  • H222: Extremely flammable aerosol.
  • H229: Pressurised container: May burst if heated.
  • H336: May cause drowsiness or dizziness.
  • H411: Toxic to aquatic life with long lasting effects.

What is the melting point of Kroon-Oil Compound OGL?

The melting point is Not applicable and the boiling point is -44,5 °C.